updates raspis to new os based on bookworm

roles/bluetooth-monitor/files/bleak3.py

@@ -0,0 +1,23 @@
+import asyncio
+from bleak import BleakScanner
+
+
+async def main():
+    stop_event = asyncio.Event()
+
+    # TODO: add something that calls stop_event.set()
+
+    def callback(device, advertising_data):
+        print("device", device.address, "advertising_data", advertising_data)
+        # TODO: do something with incoming data
+        pass
+
+    async with BleakScanner(callback, scanning_mode="active") as scanner:
+        # Important! Wait for an event to trigger stop, otherwise scanner
+        # will stop immediately.
+        await stop_event.wait()
+
+    # scanner stops when block exits
+    ...
+
+asyncio.run(main())

roles/bluetooth-monitor/files/bleak4.py

@@ -0,0 +1,38 @@
+import asyncio
+import logging
+from bleak import BleakClient, BleakScanner
+from bleak.assigned_numbers import AdvertisementDataType
+from bleak.backends.bluezdbus.advertisement_monitor import OrPattern
+from bleak.backends.bluezdbus.scanner import BlueZScannerArgs 
+
+async def scan():
+    args = BlueZScannerArgs(
+        or_patterns=[OrPattern(0, AdvertisementDataType.MANUFACTURER_SPECIFIC_DATA, b"\x10\x05")]
+    )
+
+    async with BleakScanner(bluez=args, scanning_mode="passive") as scanner:
+        async for _, advertisement_data in scanner.advertisement_data():
+            mfr_data = advertisement_data.manufacturer_data
+            if mfr_data.get(0x02e1):
+                logging.info("scan(): found correct device: %s", mfr_data)
+            else:
+                logging.info("scan(): this should never happen: %s", mfr_data)
+
+async def connect():
+    device1 = await BleakScanner.find_device_by_address("01:B6:EC:10:CB:8F")
+
+    async with BleakClient(device1):
+        logging.info("connect(): connected to device")
+        await asyncio.sleep(60)
+
+async def main():
+    logging.info("main(): starting scan")
+    asyncio.create_task(scan())
+    await asyncio.sleep(30)
+
+logging.basicConfig(
+    level=logging.INFO,
+    format="%(asctime)-15s %(name)-8s %(levelname)s: %(message)s",
+)
+
+asyncio.run(main())

roles/bluetooth-monitor/files/bleak_final.py

@@ -0,0 +1,92 @@
+import asyncio
+from bleak import BleakScanner
+from bleak.assigned_numbers import AdvertisementDataType
+from bleak.backends.bluezdbus.advertisement_monitor import OrPattern
+from bleak.backends.bluezdbus.scanner import BlueZScannerArgs 
+from Crypto.Cipher import AES
+from typing import Dict
+
+irks = {
+ "aa67542b82c0e05d65c27fb7e313aba5": "martins_apple_watch",
+ "840e3892644c1ebd1594a9069c14ce0d" : "martins_iphone",
+}
+
+def resolve_rpa(rpa: bytes, irk: bytes) -> bool:
+  """Compares the random address rpa to an irk (secret key) and return True if it matches"""
+  assert len(rpa) == 6
+  assert len(irk) == 16
+
+  key = irk
+  plain_text = b'\x00' * 16
+  plain_text = bytearray(plain_text)
+  plain_text[15] = rpa[3]
+  plain_text[14] = rpa[4]
+  plain_text[13] = rpa[5]
+  plain_text = bytes(plain_text)
+
+  cipher = AES.new(key, AES.MODE_ECB)
+  cipher_text = cipher.encrypt(plain_text)
+  return cipher_text[15] == rpa[0] and cipher_text[14] == rpa[1] and cipher_text[13] == rpa[2]
+
+
+def addr_to_bytes(addr:str) -> bytes:
+  """Converts a bluetooth mac address string with semicolons to bytes"""
+  str_without_colons = addr.replace(":", "")
+  bytearr =  bytearray.fromhex(str_without_colons)
+  bytearr.reverse()
+  return bytes(bytearr)
+
+
+def decode_address(addr: str, irks: Dict[str, str]):
+  """
+  addr is a bluetooth address as a string  e.g. 4d:24:12:12:34:10
+  irks is dict with irk as a hex string, mapping to device name
+  """
+  for irk, name in irks.items():
+    if resolve_rpa(addr_to_bytes(addr), bytes.fromhex(irk)):
+      return name
+  return None
+
+
+def estimate_distance(rssi, tx_power, pl0=54):
+  """
+  RSSI in dBm
+  txPower is a transmitter parameter that calculated according to its physic layer and antenna in dBm
+  Return value in meter
+
+  You should calculate "PL0" in calibration stage:
+  PL0 = txPower - RSSI; // When distance is distance0 (distance0 = 1m or more)
+
+  SO, RSSI will be calculated by below formula:
+  RSSI = txPower - PL0 - 10 * n * log(distance/distance0) - G(t)
+  G(t) ~= 0 //This parameter is the main challenge in achiving to more accuracy.
+  n = 2 (Path Loss Exponent, in the free space is 2)
+  distance0 = 1 (m)
+  distance = 10 ^ ((txPower - RSSI - PL0 ) / (10 * n))
+
+  Read more details:
+     https://en.wikipedia.org/wiki/Log-distance_path_loss_model
+  """
+  n = 2.7
+  return 10**(( tx_power - rssi - pl0) / (10 * n))
+
+
+def callback(device, advertising_data):
+  print(device.address)
+  decoded = decode_address(device.address, irks)
+  if decoded:
+    print(f"{decoded} @ {advertising_data.rssi} distance {estimate_distance(advertising_data.rssi, advertising_data.tx_power)}")
+
+
+async def main():
+    # Scan for 
+    args = BlueZScannerArgs(
+        or_patterns=[OrPattern(0, AdvertisementDataType.MANUFACTURER_SPECIFIC_DATA, b"\x10\x05")]
+    )
+    stop_event = asyncio.Event()
+
+    #async with BleakScanner(bluez=args, scanning_mode="passive") as scanner:
+    async with BleakScanner(callback) as scanner:
+      await stop_event.wait()
+
+asyncio.run(main())

roles/bluetooth-monitor/files/bleak_test.py

@@ -0,0 +1,10 @@
+import asyncio
+from bleak import BleakScanner
+
+async def main():
+    devices = await BleakScanner.discover()
+    while True:
+        for d in devices:
+            print(d)
+
+asyncio.run(main())

roles/bluetooth-monitor/files/bleak_test2.py

@@ -0,0 +1,58 @@
+"""Scan for iBeacons.
+Copyright (c) 2022 Koen Vervloesem
+SPDX-License-Identifier: MIT
+"""
+import asyncio
+from uuid import UUID
+
+from construct import Array, Byte, Const, Int8sl, Int16ub, Struct
+from construct.core import ConstError
+
+from bleak import BleakScanner
+from bleak.backends.device import BLEDevice
+from bleak.backends.scanner import AdvertisementData
+
+ibeacon_format = Struct(
+    "type_length" / Const(b"\x02\x15"),
+    "uuid" / Array(16, Byte),
+    "major" / Int16ub,
+    "minor" / Int16ub,
+    "power" / Int8sl,
+)
+
+
+def device_found(
+    device: BLEDevice, advertisement_data: AdvertisementData
+):
+    """Decode iBeacon."""
+    try:
+        apple_data = advertisement_data.manufacturer_data[0x004C]
+        print("apple data", apple_data)
+        ibeacon = ibeacon_format.parse(apple_data)
+        uuid = UUID(bytes=bytes(ibeacon.uuid))
+        print(f"UUID     : {uuid}")
+        print(f"Major    : {ibeacon.major}")
+        print(f"Minor    : {ibeacon.minor}")
+        print(f"TX power : {ibeacon.power} dBm")
+        print(f"RSSI     : {device.rssi} dBm")
+        print(47 * "-")
+    except KeyError:
+        # Apple company ID (0x004c) not found
+        pass
+    except ConstError:
+        # No iBeacon (type 0x02 and length 0x15)
+        pass
+
+
+async def main():
+    """Scan for devices."""
+    scanner = BleakScanner()
+    scanner.register_detection_callback(device_found)
+
+    while True:
+        await scanner.start()
+        await asyncio.sleep(1.0)
+        await scanner.stop()
+
+
+asyncio.run(main())

roles/bluetooth-monitor/files/config.yaml

@@ -0,0 +1,3 @@
+devices:
+  martins_iphone: 840e3892644c1ebd1594a9069c14ce0d 
+  martins_apple_watch: aa67542b82c0e05d65c27fb7e313aba5

roles/bluetooth-monitor/tasks/main.yml

@@ -0,0 +1,8 @@
+- name: Apt install bluez and firmware
+  apt:
+    name: 
+      - bluez
+      - bluez-firmware
+      - firmware-realtek
+      - firmware-realtek-rtl8723cs-bt
+      

roles/pi-better-shell-env/tasks/main.yml

@@ -0,0 +1,36 @@
+---
+- name: Install packages
+  apt:
+    name:
+      - bat
+      - fish
+      - fzf
+      - fd-find
+      - ripgrep
+      - lsd
+      - zoxide
+
+- name: Check if oh-my-fish is installed
+  stat:
+    path: '/etc/omf.installed'
+  register: omf
+
+- name: Download omf installer
+  get_url: 
+    url: https://raw.githubusercontent.com/oh-my-fish/oh-my-fish/master/bin/install
+    
+- name: Execute omf installer
+  shell: /usr/bin/fish /tmp/install --noninteractive
+
+- name: Execute omf installer
+  shell: /usr/bin/fish -c omf install
+
+- name: Remove the omf installer
+  file: 
+    path: /tmp/install
+    state: absent
+
+- name: Mark oh-my-fish installed with /etc/omf.installed
+  file:
+    path: /etc/omf.installed
+    state: touch

roles/pi-dhtsensor/files/dht22_sensing.service

@@ -1,10 +1,10 @@
 [Unit]
 Description=DHT22 Temperature Humidity Sensing
-After=multi-user.target
+After=network.target
 
 [Service]
 Type=simple
-ExecStart=/usr/bin/python3 /usr/bin/dht22_sensing
+ExecStart=/usr/bin/dht22_sensing
 
 [Install]
 WantedBy=multi-user.target

roles/pi-dhtsensor/tasks/main.yml

@@ -10,16 +10,18 @@
     name: adafruit-circuitpython-dht
     executable: pip3
     state: absent  
+    extra_args: "--break-system-packages"
 - name: pip install adafruit-dht
   pip:
     name: adafruit-dht
     executable: pip3
+    extra_args: "--break-system-packages"
 - name: Install script config
   template: src=dht22_sensing.json dest=/etc/dht22_sensing.json
 - name: Install script
   copy: src=dht22_sensing.py dest=/usr/bin/dht22_sensing owner=root mode=u+rwx
 - name: Install systemd service file
-  copy: src=dht22_sensing.service dest=/lib/systemd/system/
+  copy: src=dht22_sensing.service dest=/etc/systemd/system/
 - name: Add script to autostart and start now
   systemd: name=dht22_sensing state=restarted enabled=yes daemon_reload=yes
 - name: Add to sysdweb

roles/pi-hifiberry-amp/tasks/main.yml

@@ -7,7 +7,7 @@
   notify: reboot
 - name: Activate Hifiberry
   lineinfile:
-    path: /boot/config.txt
+    path: /boot/firmware/config.txt
     regexp: "^#?dtoverlay=hifiberry-amp"
     line: "dtoverlay={{hifiberry_overlay}}"
   notify: reboot

roles/pi-lirc/tasks/main.yml

@@ -1,43 +1,16 @@
 ---
-# Lirc needs a custom build on Raspian Buster, more details here:
-#   https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=235256
-#   https://gist.github.com/billpatrianakos/cb72e984d4730043fe79cbe5fc8f7941
-- name: Create lirc config dir
-  file: path=/etc/lirc state=directory
+- name: Install lirc
+  apt:
+    name: lirc
 - name: Install config file lirc_options.conf
   copy: src=lirc_options.conf dest=/etc/lirc/lirc_options.conf
 - name: Install config file lircd.conf
   copy: src=lircd.conf dest=/etc/lirc/lircd.conf
 - name: Install remote file
   copy: src=hauppauge.conf dest=/etc/lirc/hauppauge.conf
-- name: create temporary directory
-  tempfile:
-    state: directory
-    suffix: temp
-  register: tempdir
-- name: Copy over lirc customly compiled lirc packages
-  copy:
-    src: debs/
-    dest: "{{ tempdir.path }}"
-  when: tempdir.path is defined
-- name: Install custom lirc package 1
-  apt:
-    force: True
-    deb: "{{ tempdir.path }}/liblirc0_0.10.1-5.2_armhf.deb"
-  when: tempdir.path is defined
-- name: Install custom lirc package 2
-  apt:
-    force: True
-    deb: "{{ tempdir.path }}/liblircclient0_0.10.1-5.2_armhf.deb"
-  when: tempdir.path is defined
-- name: Install custom lirc package 3
-  apt:
-    force: True
-    deb: "{{ tempdir.path }}/lirc_0.10.1-5.2_armhf.deb"
-  when: tempdir.path is defined
 - name: Activate overlay in boot config
   lineinfile:
-    path: /boot/config.txt
+    path: /boot/firmware/config.txt
     regexp: "^#?dtoverlay=gpio-ir"
     line: "dtoverlay=gpio-ir,gpio_pin=17"
   register: boot_overlay

roles/pi-squeezelite-custom/custom build/readme_build.md

@@ -1,3 +1,25 @@
+
+Repository: https://github.com/ralph-irving/squeezelite.git
+Version: c89faf3280c5dca3f04906a4ff7796a0043e99f0
+
+
+Packages to build:
+      - libmad0
+      - libmpg123-0
+      - libflac8
+      - libvorbisfile3
+      - libfaad2
+      # for building libssl-dev, libasound2-dev, libflac-dev, libvorbis-dev, libsoxr-dev, libfaad-dev, libmad0-dev, libmpg123-dev
+
+Adapted makefile.rpi 
+#OPTS = -DRESAMPLE -DDSD -DUSE_SSL -DLINKALL -I./include -I./include/opus -I./include/alac -I/usr/local/include -s -mfpu=vfp -mfloat-abi=hard -march=armv6zk -mtune=arm1176jzf-s
+
+
+
+Old
+---
+
+
 Repository: https://github.com/ralph-irving/squeezelite.git
 Version: 779fe9035a2dfcaeeb5335497a012d5e7241a409
 
@@ -22,3 +44,4 @@ apt-get install libasound2 libasound2-dev libflac-dev libmad0-dev libfaad-dev li
 
 Then just build with 
     make -f mymakefile (on a raspi)
+

roles/pi-squeezelite-custom/tasks/main.yml

@@ -6,9 +6,10 @@
     name:
       - libmad0
       - libmpg123-0
-      - libflac8
+      - libflac12
       - libvorbisfile3
       - libfaad2
+      # for building libssl-dev, libasound2-dev, libflac-dev, libvorbis-dev, libsoxr-dev, libfaad-dev, libmad0-dev, libmpg123-dev
     state: present
     cache_valid_time: 7200
 - name: Remove old config file if present
@@ -24,3 +25,7 @@
     name: pi-sysdweb
   vars:
     sysdweb_name: squeezelite
+
+
+# build with adapted Makefile.rpi:
+#OPTS = -DRESAMPLE -DDSD -DUSE_SSL -DLINKALL -I./include -I./include/opus -I./include/alac -I/usr/local/include -s -mfpu=vfp -mfloat-abi=hard -march=armv6zk -mtune=arm1176jzf-s

roles/pi-squeezeserver/files/source_url.txt

@@ -1 +1,2 @@
-http://downloads.slimdevices.com/LogitechMediaServer_v7.9.2/logitechmediaserver_7.9.2_arm.deb
+#http://downloads.slimdevices.com/LogitechMediaServer_v7.9.2/logitechmediaserver_7.9.2_arm.deb
+https://downloads.slimdevices.com/LogitechMediaServer_v8.4.0/logitechmediaserver_8.4.0_arm.deb

roles/pi-squeezeserver/tasks/main.yml

@@ -15,9 +15,9 @@
     cache_valid_time: 7200
     state: present
 - name: copy squeezeserver package
-  copy: src=logitechmediaserver_7.9.2_arm.deb dest=/tmp
+  copy: src=logitechmediaserver_8.4.0_arm.deb dest=/tmp
 - name: install squeezeserver package
-  apt: deb=/tmp/logitechmediaserver_7.9.2_arm.deb
+  apt: deb=/tmp/logitechmediaserver_8.4.0_arm.deb
 - name: Enable sysdweb autostart
   systemd: name=logitechmediaserver state=started enabled=yes
 - name: Add to sysdweb

roles/pi-sysdweb/tasks/main.yml

@@ -9,6 +9,7 @@
   pip:
     name: sysdweb
     executable: pip3
+    extra_args: "--break-system-packages"
 - name: sysdweb user
   user:
     name: sysdweb
@@ -33,6 +34,6 @@
       title = {{sysdweb_name}}
       unit = {{sysdweb_name}}.service
 - name: Install systemd service file
-  copy: src=sysdweb-system.service dest=/lib/systemd/system/
+  copy: src=sysdweb-system.service dest=/etc/systemd/system/
 - name: Enable sysdweb autostart
   systemd: name=sysdweb-system state=restarted enabled=yes daemon_reload=yes