updates raspis to new os based on bookworm

.gitignore

@@ -0,0 +1,7 @@
+ve_*
+/server/scripts/docker-images/tagspace/tagspaces
+/server/scripts/docker-images/tagspace/*.zip
+*.img
+/music
+__pycache__
+/roles/pi-squeezeserver/backup

.vscode/settings.json

@@ -0,0 +1,5 @@
+{
+    "python.linting.pylintEnabled": false,
+    "python.linting.enabled": true,
+    "python.linting.flake8Enabled": true
+}

full.yml

@@ -0,0 +1,49 @@
+---
+
+
+#- hosts: esszimmerradio
+#  roles:
+#    - pi-standard-setup
+#    - pi-squeezelite-custom
+#    - pi-shairport
+#    - pi-lirc
+#    - pi-sispmctl
+#
+- hosts: musikserverwohnzimmeroben
+  roles:
+    - pi-standard-setup
+    - pi-hifiberry-amp
+    - pi-squeezelite-custom
+    - pi-shairport
+    - pi-irserver
+    - pi-dhtsensor
+    - pi-squeezeserver
+
+
+#- hosts: kitchenpi  
+#  roles:
+#    - pi-standard-setup
+#    - pi-hifiberry-amp
+#    - pi-squeezelite-custom
+#    - pi-shairport
+#    - pi-lirc
+#    - pi-dhtsensor
+
+#- hosts: bedroompi
+#  roles:
+#    - pi-standard-setup
+#    - pi-squeezelite-custom
+#    - pi-shairport
+#    - pi-lirc
+#    - pi-dhtsensor
+
+#- hosts: octopi
+#  roles:
+#    - pi-dhtsensor
+    
+
+#- hosts: newrpi
+#  roles:
+#     - pi-standard-setup
+#     - pi-lirc
+

inventory.yml

@@ -0,0 +1,63 @@
+all:
+  hosts:
+    server:
+      ansible_host: home.bauer.tech
+      ansible_port: 22187
+    server2:
+      
+  children:
+    iot:
+      hosts:
+        octopi:
+          sensor_room_name_ascii: prusaprinter
+          sensor_room_name: prusaprinter
+          dht_pin: 26
+        bedroompi:
+          squeezelite_name: BedroomPi
+          shairport_name: BedroomPi
+          alsa_card_name: Codec
+          sensor_room_name_ascii: schlafzimmer
+          sensor_room_name: Schlafzimmer
+        kitchenpi:
+          squeezelite_name: KitchenPi
+          shairport_name: KitchenPi
+          alsa_card_name: 0
+          sensor_room_name_ascii: kueche
+          sensor_room_name: Küche
+          hifiberry_overlay: hifiberry-amp
+        esszimmerradio: # oben, eltern
+          squeezelite_name: Esszimmer
+          shairport_name: _Oben_Esszimmer
+          #alsa_card_name: Device
+          squeezeserver: 192.168.178.100
+          configure_wifi: true
+          alsa_card_name: 1
+        musikserverwohnzimmeroben: # oben, eltern
+          squeezelite_name: Wohnzimmer
+          shairport_name: _Oben_Wohnzimmer
+          alsa_card_name: 0
+          squeezeserver: 192.168.178.100
+          sensor_room_name_ascii: wohnzimmeroben
+          sensor_room_name: WohnzimmerOben
+          hifiberry_overlay: hifiberry-dacplus
+        musicmouse:
+          squeezelite_name: MusicMouse
+          shairport_name: MusicMouse
+          alsa_card_name: 0
+          hifiberry_overlay: hifiberry-dacplus
+        newrpi:
+          squeezelite_name: MyTestRaspberry
+          shairport_name: MyTestRaspberry
+          alsa_card_name: 0
+          sensor_room_name_ascii: testraum
+          sensor_room_name: Test Raum
+        heatingpi:          
+  vars:
+    ansible_user: root
+    ansible_python_interpreter: /usr/bin/python3
+    squeezeserver: 192.168.178.80
+    router_ip: 192.168.178.1
+    home_assistant_url: https://ha.bauer.tech
+    home_assistant_token: eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiJkM2QxYjAwYjkxZjY0MWVhYjA4YmZhMDYwYTg3YjRhNyIsImlhdCI6MTcwNDI3MDU5MSwiZXhwIjoyMDE5NjMwNTkxfQ.dzvejgEQd9hf-Yftzd7NkR5pv76GaLFczeOy-a2pa1o
+    configure_wifi: false
+    wifi_ssid: BauerWLAN

lookup_plugins/keepass.py

@@ -2,7 +2,7 @@
 from ansible.errors import AnsibleError
 from ansible.plugins.lookup import LookupBase
 from keepasshttplib import keepasshttplib, encrypter
-
+import requests
 
 DOCUMENTATION = """
     lookup: keepass
@@ -39,12 +39,12 @@ class LookupModule(LookupBase):
         else:
             entry_path, entry_attr = terms[0], terms[1]
         
-        if not self._test_connection():
-            raise AnsibleError('Keepass is closed!')
+        #if not self._test_connection():
+        #    raise AnsibleError('Keepass is closed!')
         try:
             auth = self.k.get_credentials(entry_path)
         except Exception as e:
-            raise AnsibleError('Keepass error obtaining entry {}: {}'.format(host_name, e))
+            raise AnsibleError('Keepass error obtaining entry {}: {}'.format(entry_path, e))
         if auth:
             if entry_attr not in ('username', 'user', 'pass', 'passwd', 'password'):
                 raise AnsibleError("Keepass wrong entry")

newrpi-provisioning.yml

@@ -0,0 +1,8 @@
+---
+- hosts: musicmouse
+  roles:
+    - pi-standard-setup
+    - pi-hifiberry-amp
+    - pi-squeezelite
+    - pi-shairport
+    - pi-lirc

octopisetup.yml

@@ -0,0 +1,3 @@
+- hosts: octopi
+  roles:
+    - pi-dhtsensor

pis/01-download-and-prepare-raspi-image.yml

@@ -1,96 +0,0 @@
-# Run with
-# ansible-playbook 01-download-and-prepare-raspi-image.yml
----
-
-- hosts: 127.0.0.1
-  connection: local
-  gather_facts: false
-  vars:
-    target_folder: "/media/martin/data_linux/tmp/"
-  vars_prompt:
-    - name: "ansible_become_pass"
-      prompt: "Sudo password to mount raspi image"
-    - name: "new_hostname"
-      prompt: "New hostname for the PI"
-      private: no
-  tasks:
-    # --- Preparation ---
-    - name: Download Raspian image
-      get_url:
-        url: "https://downloads.raspberrypi.org/raspbian_lite_latest"
-        dest: "{{target_folder}}/raspian_lite_latest.zip"
-    - name: Unpack Image
-      unarchive:
-        src: "{{target_folder}}/raspian_lite_latest.zip"
-        dest:  "{{target_folder}}"
-        creates: "{{target_folder}}/*raspbian*.img"
-    - name: Make Folders to mount to
-      file:
-        path: "{{item}}"
-        state: directory
-      with_items:
-        - "{{target_folder}}/mounted_raspi_image"
-        - "{{target_folder}}/mounted_raspi_image/boot"
-        - "{{target_folder}}/mounted_raspi_image/system"
-    - name: Setup Loopback
-      become: true
-      shell:
-        cmd: "losetup -P /dev/loop42 {{target_folder}}/*raspbian*.img"
-        creates: "/dev/loop42p1"
-    - name: Mount Boot Partition
-      become: true
-      shell:
-        warn: false
-        cmd: "mount /dev/loop42p1 {{target_folder}}/mounted_raspi_image/boot"
-        creates: "{{target_folder}}/mounted_raspi_image/boot/kernel.img"
-    - name: Mount System Partition
-      become: true
-      shell:
-        warn: false
-        cmd: "mount /dev/loop42p2 {{target_folder}}/mounted_raspi_image/system"
-        creates: "{{target_folder}}/mounted_raspi_image/system/bin"
-    # --- Actual work ---
-    - name: "Add SSH File to boot partition to allow for first remote login"
-      become: true
-      file:
-        path: "{{target_folder}}/mounted_raspi_image/boot/ssh"
-        state: touch
-    - name: "Writing new hostname to /etc/hostname"
-      become: true
-      copy:
-        content: "{{new_hostname}}"
-        dest: "{{target_folder}}/mounted_raspi_image/system/etc/hostname"
-    # --- Wind-down
-    - name: Unmount System Partition
-      become: true
-      shell:
-        warn: false
-        cmd: "umount /dev/loop42p2"
-        removes: "{{target_folder}}/mounted_raspi_image/system/bin"
-    - name: Unmount Boot Partition
-      become: true
-      shell:
-        warn: false
-        cmd: "umount /dev/loop42p1"
-        removes: "{{target_folder}}/mounted_raspi_image/boot/kernel.img"
-    - name: Tear down loop device
-      become: true
-      shell:
-        cmd: "losetup -d /dev/loop42"
-        removes: "/dev/loop42p1"
-    - name: Remove folders
-      file:
-        path: "{{item}}"
-        state: absent
-      with_items:
-        - "{{target_folder}}/mounted_raspi_image"
-        - "{{target_folder}}/mounted_raspi_image/boot"
-        - "{{target_folder}}/mounted_raspi_image/system"
-        - "{{target_folder}}/raspian_lite_latest.zip"
-    - name: Final Image
-      debug:
-        msg: |
-          The prepared image is ready at {{target_folder}}.
-          Copy it to sdcard with
-          dd bs=4M status=progress if=the_image of=/dev/your/sdcard
-          use e.g. /dev/sdb not /dev/sdb1 !

pis/02-provision_new_pi.yml

@@ -1,109 +0,0 @@
-# Run with
-# ansible-playbook -i raspberrypi, 02-provision_new_pi.yml
-# where "raspberrypi" is the hostname of the pi
----
-
-- hosts: kitchenpi
-  gather_facts: false
-  vars:
-    timezone: "Europe/Berlin"
-    wifi_country: "DE"
-    wifi_ssid: "" # put SSID here to configure wifi
-    wifi_pass_url: "bauer_wifi"  # has to be in keepass with url "wifi_pass_url"
-    ansible_ssh_pass: raspberry
-    ansible_become: yes
-    ansible_become_password: raspberry
-    new_hostname: "" # set this to change the hostname
-  vars_prompt:
-    - name: ansible_user
-      prompt: "User to connect with, put in 'pi' here if you connect the first time, else leave empty"
-      default: root
-  tasks:
-    - name: Do apt update/upgrade
-      apt: upgrade=yes update_cache=yes cache_valid_time=7200
-    - name: Detect Raspi Model
-      slurp: src=/sys/firmware/devicetree/base/model
-      register: raspberry_model
-    - name: Show Raspi Model
-      debug: msg={{ raspberry_model.content | b64decode }}
-    - name: Add authorized SSH key to root account
-      authorized_key:
-        user: root
-        key: "{{ lookup('file', '../public_keys/martin_laptop.pub') }}"
-        state: present
-    - name: Activate root login with key
-      lineinfile:
-        path: /etc/ssh/sshd_config
-        regexp: "^#?PermitRootLogin"
-        line: "PermitRootLogin prohibit-password"
-      notify: restart sshd
-    - name: Deactive SSH accepting locale vars (leads to warnings)
-      lineinfile:
-        path: /etc/ssh/sshd_config
-        regexp: "^#?AcceptEnv LANG LC_*"
-        line: "#AcceptEnv LANG LC_*"
-      notify: restart sshd
-    - name: Get hostname
-      command: "raspi-config nonint get_hostname"
-      register: pi_hostname
-      changed_when: False
-    - name: Change hostname to {{ new_hostname }}
-      command: "raspi-config nonint do_hostname {{ new_hostname }}"
-      when: new_hostname | bool and pi_hostname.stdout != new_hostname
-    - name: set boot mode to CLI
-      command: "raspi-config nonint do_boot_behaviour B1"
-    #I2 Change Timezone
-    - name: Change timezone
-      command: "raspi-config nonint do_change_timezone {{ timezone }}"
-    - name: Change locale
-      command: "raspi-config nonint do_change_locale en_US.UTF-8"
-    - name: Change password of default pi account
-      user:
-        name: pi
-        update_password: always
-        password: "{{ lookup('keepass', 'default_rpi_password') | password_hash('sha512')  }}"
-    - name: Install Packages (vim, git, basic python stuff)
-      apt:
-        name:
-          - vim
-          - git
-          - python3
-          - python3-pip
-          - python3-wheel
-        cache_valid_time: 7200
-        state: present
-    - name: Copy vim config
-      copy: src=../configs/vimrc dest=/root/.vimrc
-    - name: Copy git config
-      copy: src=../configs/gitconfig dest=/root/.gitconfig
-    # Wifi
-    - name: Get WiFi country
-      command: "raspi-config nonint get_wifi_country"
-      register: wifi_country
-      changed_when: False
-      ignore_errors: yes #to avoid error when WiFi is not present
-    - name: Change WiFi country
-      command: "raspi-config nonint do_wifi_country {{ wifi_country }}"
-    - name: Set WiFi credentials
-      command: "raspi-config nonint do_wifi_ssid_passphrase {{ wifi_ssid }} {{ lookup('keepass', wifi_pass_url) }}"
-      when: wifi_ssid | bool
-    # Message of the day
-    - name: Set Message of the day
-      copy: src=configs/motd/{{ inventory_hostname }} dest=/etc/motd
-    #- name: Remove motd tail
-    #  copy: dest=/etc/motd.
-    # LED off script
-    - name: Copy led off script
-      copy: src=configs/raspi-leds-off.sh dest=/usr/sbin/raspi-leds-off.sh mode="u+rwx"
-    - name: Copy led off service
-      copy: src=configs/raspi-leds-off.service dest=/lib/systemd/system/
-    - name: Activate led off servic
-      systemd: name=raspi-leds-off state=restarted enabled=yes daemon_reload=yes
-
-  handlers:
-    - name: restart sshd
-      service:
-        name: sshd
-        state: restarted
-
-

pis/03-shairport-install.yml

@@ -1,44 +0,0 @@
-# Install instructions taken from
-#   https://github.com/mikebrady/shairport-sync/blob/master/INSTALL.md
-
----
-
-- hosts: kitchenpi
-  gather_facts: false
-  vars:
-    shairport_sync_version: "3.3.5"
-  remote_user: root
-  tasks:
-    - name: Apt install dependencies
-      apt:
-        cache_valid_time: 7200
-        state: present
-        name:
-          - build-essential
-          - git
-          - xmltoman
-          - autoconf
-          - automake
-          - libtool
-          - libpopt-dev
-          - libconfig-dev
-          - libasound2-dev
-          - avahi-daemon
-          - libavahi-client-dev
-          - libssl-dev
-          - libsoxr-dev
-    - name: Build and Install Shairport sync (may take a while)
-      script: "scripts/build-shairport-sync.sh ${shairport_sync_version}"
-      args:
-        creates: /usr/local/bin/shairport-sync
-    - name: Copy config
-      template: src=configs/shairport-sync.conf dest=/etc/shairport-sync.conf
-    - name: Sync alsa config
-      template: src=configs/asound.conf dest=/etc/asound.conf
-    - name: Modify service file to run as root
-      lineinfile:
-        path: /lib/systemd/system/shairport-sync.service
-        regexp: "^#?User="
-        line: "User=root"
-    - name: Restart shairport-sync
-      systemd: name=shairport-sync state=restarted enabled=yes daemon_reload=yes

pis/04-squeezelite.yml

@@ -1,14 +0,0 @@
----
-
-- hosts: kitchenpi
-  gather_facts: false
-  remote_user: root
-  tasks:
-    - name: Apt install squeezelite package
-      apt: name=squeezelite cache_valid_time=7200 state=present
-    - name: Install config file
-      template: src=configs/squeezelite.cfg dest=/etc/default/squeezelite
-    - name: Sync alsa config
-      template: src=configs/asound.conf dest=/etc/asound.conf
-    - name: Restart squeezelite
-      systemd: name=squeezelite state=restarted enabled=yes daemon_reload=yes

pis/05-lirc.yml

@@ -1,49 +0,0 @@
----
-# lirc needs to be custom compiled on this kernel
-# https://gist.github.com/billpatrianakos/cb72e984d4730043fe79cbe5fc8f7941
-- hosts: kitchenpi
-  gather_facts: false
-  remote_user: root
-  tasks:
-    #- name: Apt install lirc package
-    #  apt: name=lirc cache_valid_time=7200 state=present
-    #  ignore_errors: yes
-    - name: Install config file lirc_options.conf
-      copy: src=configs/lirc/lirc_options.conf dest=/etc/lirc/lirc_options.conf
-    - name: Install config file lircd.conf
-      copy: src=configs/lirc/lircd.conf dest=/etc/lirc/lircd.conf
-    - name: Install remote file
-      copy: src=configs/lirc/hauppauge.conf dest=/etc/lirc/hauppauge.conf
-    - name: create temporary directory
-      tempfile:
-        state: directory
-        suffix: temp
-      register: tempdir
-    - name: Copy over lirc customly compiled lirc packages
-      copy:
-        src: configs/lirc/debs/
-        dest: "{{ tempdir.path }}"
-      when: tempdir.path is defined
-    - name: Install custom lirc package 1
-      apt:
-        deb: "{{ tempdir.path }}/liblirc0_0.10.1-5.2_armhf.deb"
-      when: tempdir.path is defined
-    - name: Install custom lirc package 2
-      apt:
-        deb: "{{ tempdir.path }}/liblircclient0_0.10.1-5.2_armhf.deb"
-      when: tempdir.path is defined
-    - name: Install custom lirc package 3
-      apt:
-        deb: "{{ tempdir.path }}/lirc_0.10.1-5.2_armhf.deb"
-      when: tempdir.path is defined
-    - name: Activate overlay in boot config
-      lineinfile:
-        path: /boot/config.txt
-        regexp: "^#?dtoverlay=gpio-ir"
-        line: "dtoverlay=gpio-ir,gpio_pin=17"
-      register: boot_overlay
-    - name: Restart lircd
-      systemd: name=lircd state=restarted enabled=yes daemon_reload=yes
-    - name: Reboot if boot overlay changed
-      reboot:
-      when: boot_overlay.changed

pis/06-hifiberry.yml

@@ -1,27 +0,0 @@
----
-
-- hosts: newrpi
-  gather_facts: false
-  remote_user: root
-  tasks:
-    - name: Deactivate normal audio
-      lineinfile:
-        path: /boot/config.txt
-        regexp: "^#?dtparam=audio=on"
-        line: "#dtparam=audio=on"
-      register: boot_overlay1
-    - name: Activate Hifiberry
-      lineinfile:
-        path: /boot/config.txt
-        regexp: "^#?dtoverlay=hifiberry-amp"
-        line: "dtoverlay=hifiberry-amp"
-      register: boot_overlay2
-    #- name: Reboot if boot overlay changed
-    #  reboot:
-    #  when: boot_overlay1.changed or boot_overlay2.changed
-
-
-## State in /boot/config.txt
-#  dtoverlay=hifiberry-amp
-#  # remove old:
-#  #dtparam=audio=on

pis/07-dhtsensor.yml

@@ -1,20 +0,0 @@
----
-
-- hosts: kitchenpi
-  gather_facts: false
-  remote_user: root
-  tasks:
-    - name: apt install libgpiod2
-      apt: name=libgpiod2 cache_valid_time=7200 state=present
-    - name: pip install adafruit-circuitpython-dht
-      pip:
-        name: adafruit-circuitpython-dht
-        executable: pip3
-    - name: Install script config
-      template: src=configs/dht22_sensing.json dest=/etc/dht22_sensing.json
-    - name: Install script
-      copy: src=configs/dht22_sensing.py dest=/usr/bin/dht22_sensing owner=root mode=u+rwx
-    - name: Install systemd service file
-      copy: src=configs/dht22_sensing.service dest=/lib/systemd/system/
-    - name: Add script to autostart and start now
-      systemd: name=dht22_sensing state=restarted enabled=yes daemon_reload=yes

pis/inventory.yml

@@ -1,26 +0,0 @@
-all:
-  hosts:
-    server:
-      ansible_host: home.bauer.tech
-      ansible_port: 22187
-
-  children:
-    iot:
-      hosts:
-        newrpi:
-          squeezelite_name: MyTestRaspberry
-          shairport_name: MyTestRaspberry
-          alsa_card_name: 0
-          sensor_room_name_ascii: testraum
-          sensor_room_name: Test Raum
-        heatingpi:
-        bedroompi:
-        kitchenpi:
-          squeezelite_name: KitchenPi
-          shairport_name: KitchenPi
-          alsa_card_name: 0
-          sensor_room_name_ascii: kueche
-          sensor_room_name: Küche
-  vars:
-    ansible_python_interpreter: /usr/bin/python3
-

pis/notes.md

@@ -1,2 +0,0 @@
-/etc/modules
-    -> bedroompi: snd-bcm2835

pis/sensor.py

@@ -1,24 +0,0 @@
-# -*- coding: utf-8 -*-
-import requests
-
-key = "eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiIxNjkxMWIzZmQ4ZWU0NDI0OTg0MjA0ZDllMDhkNGRlMCIsImlhdCI6MTU3ODE3MDU5MSwiZXhwIjoxODkzNTMwNTkxfQ.i7CdXEZy9DV9KPHAl-msK0rOfIUlPYo4zwwJ4UGhXuc"
-url = "https://ha.bauer.tech"
-
-headers = {
-    'x-ha-access': key,
-    'Authorization': "Bearer {}".format(key)
-}
-
-apiurl = url + "/api/states/sensor.schlafzimmer_temperatur"
-
-data = {
-    "state": "19",
-    "attributes": {
-        "device_class": "temperature",
-        "friendly_name": "Schlafzimmer Temperatur",
-        "unit_of_measurement": "°C"
-    }
-}
-r = requests.post(apiurl, json=data, headers=headers)
-
-print(r)

roles/bluetooth-monitor/files/bleak3.py

@@ -0,0 +1,23 @@
+import asyncio
+from bleak import BleakScanner
+
+
+async def main():
+    stop_event = asyncio.Event()
+
+    # TODO: add something that calls stop_event.set()
+
+    def callback(device, advertising_data):
+        print("device", device.address, "advertising_data", advertising_data)
+        # TODO: do something with incoming data
+        pass
+
+    async with BleakScanner(callback, scanning_mode="active") as scanner:
+        # Important! Wait for an event to trigger stop, otherwise scanner
+        # will stop immediately.
+        await stop_event.wait()
+
+    # scanner stops when block exits
+    ...
+
+asyncio.run(main())

roles/bluetooth-monitor/files/bleak4.py

@@ -0,0 +1,38 @@
+import asyncio
+import logging
+from bleak import BleakClient, BleakScanner
+from bleak.assigned_numbers import AdvertisementDataType
+from bleak.backends.bluezdbus.advertisement_monitor import OrPattern
+from bleak.backends.bluezdbus.scanner import BlueZScannerArgs 
+
+async def scan():
+    args = BlueZScannerArgs(
+        or_patterns=[OrPattern(0, AdvertisementDataType.MANUFACTURER_SPECIFIC_DATA, b"\x10\x05")]
+    )
+
+    async with BleakScanner(bluez=args, scanning_mode="passive") as scanner:
+        async for _, advertisement_data in scanner.advertisement_data():
+            mfr_data = advertisement_data.manufacturer_data
+            if mfr_data.get(0x02e1):
+                logging.info("scan(): found correct device: %s", mfr_data)
+            else:
+                logging.info("scan(): this should never happen: %s", mfr_data)
+
+async def connect():
+    device1 = await BleakScanner.find_device_by_address("01:B6:EC:10:CB:8F")
+
+    async with BleakClient(device1):
+        logging.info("connect(): connected to device")
+        await asyncio.sleep(60)
+
+async def main():
+    logging.info("main(): starting scan")
+    asyncio.create_task(scan())
+    await asyncio.sleep(30)
+
+logging.basicConfig(
+    level=logging.INFO,
+    format="%(asctime)-15s %(name)-8s %(levelname)s: %(message)s",
+)
+
+asyncio.run(main())

roles/bluetooth-monitor/files/bleak_final.py

@@ -0,0 +1,92 @@
+import asyncio
+from bleak import BleakScanner
+from bleak.assigned_numbers import AdvertisementDataType
+from bleak.backends.bluezdbus.advertisement_monitor import OrPattern
+from bleak.backends.bluezdbus.scanner import BlueZScannerArgs 
+from Crypto.Cipher import AES
+from typing import Dict
+
+irks = {
+ "aa67542b82c0e05d65c27fb7e313aba5": "martins_apple_watch",
+ "840e3892644c1ebd1594a9069c14ce0d" : "martins_iphone",
+}
+
+def resolve_rpa(rpa: bytes, irk: bytes) -> bool:
+  """Compares the random address rpa to an irk (secret key) and return True if it matches"""
+  assert len(rpa) == 6
+  assert len(irk) == 16
+
+  key = irk
+  plain_text = b'\x00' * 16
+  plain_text = bytearray(plain_text)
+  plain_text[15] = rpa[3]
+  plain_text[14] = rpa[4]
+  plain_text[13] = rpa[5]
+  plain_text = bytes(plain_text)
+
+  cipher = AES.new(key, AES.MODE_ECB)
+  cipher_text = cipher.encrypt(plain_text)
+  return cipher_text[15] == rpa[0] and cipher_text[14] == rpa[1] and cipher_text[13] == rpa[2]
+
+
+def addr_to_bytes(addr:str) -> bytes:
+  """Converts a bluetooth mac address string with semicolons to bytes"""
+  str_without_colons = addr.replace(":", "")
+  bytearr =  bytearray.fromhex(str_without_colons)
+  bytearr.reverse()
+  return bytes(bytearr)
+
+
+def decode_address(addr: str, irks: Dict[str, str]):
+  """
+  addr is a bluetooth address as a string  e.g. 4d:24:12:12:34:10
+  irks is dict with irk as a hex string, mapping to device name
+  """
+  for irk, name in irks.items():
+    if resolve_rpa(addr_to_bytes(addr), bytes.fromhex(irk)):
+      return name
+  return None
+
+
+def estimate_distance(rssi, tx_power, pl0=54):
+  """
+  RSSI in dBm
+  txPower is a transmitter parameter that calculated according to its physic layer and antenna in dBm
+  Return value in meter
+
+  You should calculate "PL0" in calibration stage:
+  PL0 = txPower - RSSI; // When distance is distance0 (distance0 = 1m or more)
+
+  SO, RSSI will be calculated by below formula:
+  RSSI = txPower - PL0 - 10 * n * log(distance/distance0) - G(t)
+  G(t) ~= 0 //This parameter is the main challenge in achiving to more accuracy.
+  n = 2 (Path Loss Exponent, in the free space is 2)
+  distance0 = 1 (m)
+  distance = 10 ^ ((txPower - RSSI - PL0 ) / (10 * n))
+
+  Read more details:
+     https://en.wikipedia.org/wiki/Log-distance_path_loss_model
+  """
+  n = 2.7
+  return 10**(( tx_power - rssi - pl0) / (10 * n))
+
+
+def callback(device, advertising_data):
+  print(device.address)
+  decoded = decode_address(device.address, irks)
+  if decoded:
+    print(f"{decoded} @ {advertising_data.rssi} distance {estimate_distance(advertising_data.rssi, advertising_data.tx_power)}")
+
+
+async def main():
+    # Scan for 
+    args = BlueZScannerArgs(
+        or_patterns=[OrPattern(0, AdvertisementDataType.MANUFACTURER_SPECIFIC_DATA, b"\x10\x05")]
+    )
+    stop_event = asyncio.Event()
+
+    #async with BleakScanner(bluez=args, scanning_mode="passive") as scanner:
+    async with BleakScanner(callback) as scanner:
+      await stop_event.wait()
+
+asyncio.run(main())

roles/bluetooth-monitor/files/bleak_test.py

@@ -0,0 +1,10 @@
+import asyncio
+from bleak import BleakScanner
+
+async def main():
+    devices = await BleakScanner.discover()
+    while True:
+        for d in devices:
+            print(d)
+
+asyncio.run(main())

roles/bluetooth-monitor/files/bleak_test2.py

@@ -0,0 +1,58 @@
+"""Scan for iBeacons.
+Copyright (c) 2022 Koen Vervloesem
+SPDX-License-Identifier: MIT
+"""
+import asyncio
+from uuid import UUID
+
+from construct import Array, Byte, Const, Int8sl, Int16ub, Struct
+from construct.core import ConstError
+
+from bleak import BleakScanner
+from bleak.backends.device import BLEDevice
+from bleak.backends.scanner import AdvertisementData
+
+ibeacon_format = Struct(
+    "type_length" / Const(b"\x02\x15"),
+    "uuid" / Array(16, Byte),
+    "major" / Int16ub,
+    "minor" / Int16ub,
+    "power" / Int8sl,
+)
+
+
+def device_found(
+    device: BLEDevice, advertisement_data: AdvertisementData
+):
+    """Decode iBeacon."""
+    try:
+        apple_data = advertisement_data.manufacturer_data[0x004C]
+        print("apple data", apple_data)
+        ibeacon = ibeacon_format.parse(apple_data)
+        uuid = UUID(bytes=bytes(ibeacon.uuid))
+        print(f"UUID     : {uuid}")
+        print(f"Major    : {ibeacon.major}")
+        print(f"Minor    : {ibeacon.minor}")
+        print(f"TX power : {ibeacon.power} dBm")
+        print(f"RSSI     : {device.rssi} dBm")
+        print(47 * "-")
+    except KeyError:
+        # Apple company ID (0x004c) not found
+        pass
+    except ConstError:
+        # No iBeacon (type 0x02 and length 0x15)
+        pass
+
+
+async def main():
+    """Scan for devices."""
+    scanner = BleakScanner()
+    scanner.register_detection_callback(device_found)
+
+    while True:
+        await scanner.start()
+        await asyncio.sleep(1.0)
+        await scanner.stop()
+
+
+asyncio.run(main())

roles/bluetooth-monitor/files/config.yaml

@@ -0,0 +1,3 @@
+devices:
+  martins_iphone: 840e3892644c1ebd1594a9069c14ce0d 
+  martins_apple_watch: aa67542b82c0e05d65c27fb7e313aba5

roles/bluetooth-monitor/tasks/main.yml

@@ -0,0 +1,8 @@
+- name: Apt install bluez and firmware
+  apt:
+    name: 
+      - bluez
+      - bluez-firmware
+      - firmware-realtek
+      - firmware-realtek-rtl8723cs-bt
+      

roles/pi-alsasetup/tasks/main.yml

@@ -0,0 +1,3 @@
+---
+- name: Sync alsa config
+  template: src=asound.conf dest=/etc/asound.conf

roles/pi-better-shell-env/tasks/main.yml

@@ -0,0 +1,36 @@
+---
+- name: Install packages
+  apt:
+    name:
+      - bat
+      - fish
+      - fzf
+      - fd-find
+      - ripgrep
+      - lsd
+      - zoxide
+
+- name: Check if oh-my-fish is installed
+  stat:
+    path: '/etc/omf.installed'
+  register: omf
+
+- name: Download omf installer
+  get_url: 
+    url: https://raw.githubusercontent.com/oh-my-fish/oh-my-fish/master/bin/install
+    
+- name: Execute omf installer
+  shell: /usr/bin/fish /tmp/install --noninteractive
+
+- name: Execute omf installer
+  shell: /usr/bin/fish -c omf install
+
+- name: Remove the omf installer
+  file: 
+    path: /tmp/install
+    state: absent
+
+- name: Mark oh-my-fish installed with /etc/omf.installed
+  file:
+    path: /etc/omf.installed
+    state: touch

roles/pi-dhtsensor-circuitpython/defaults/main.yml

@@ -0,0 +1,3 @@
+---
+dht_pin: "D12"
+dht_polling_sleep_time_seconds: 20

roles/pi-dhtsensor-circuitpython/files/dht22_sensing.py

@@ -4,20 +4,21 @@
 import requests
 import json
 import time
-import board
-import adafruit_dht
+import multiprocessing
+
 
 config = json.load(open("/etc/dht22_sensing.json"))
-dht_device = adafruit_dht.DHT22(getattr(board, config['dht_pin']))
 
 
 def send_to_home_assistant(temperature, humidity):
+    # print(f"Sending temperature {temperature}, humidity {humidity}")
     headers = {
         'x-ha-access': config['token'],
         'Authorization': "Bearer {}".format(config['token'])
     }
 
-    temperature_url = "{}/api/states/sensor.{}".format(config['ha_url'], config['ha_temp_sensor_name'])
+    temperature_url = "{}/api/states/sensor.{}".format(
+        config['ha_url'], config['ha_temp_sensor_name'])
     temperatur_data = {
         "state": str(temperature),
         "attributes": {
@@ -28,7 +29,8 @@ def send_to_home_assistant(temperature, humidity):
     }
     requests.post(temperature_url, json=temperatur_data, headers=headers)
 
-    humidity_url = "{}/api/states/sensor.{}".format(config['ha_url'], config['ha_humidity_sensor_name'])
+    humidity_url = "{}/api/states/sensor.{}".format(
+        config['ha_url'], config['ha_humidity_sensor_name'])
     humidity_data = {
         "state": str(humidity),
         "attributes": {
@@ -41,13 +43,22 @@ def send_to_home_assistant(temperature, humidity):
 
 
 def sense():
+    import adafruit_dht
+    import board
+
+    dht_device = adafruit_dht.DHT22(getattr(board, config['dht_pin']))
+
     try:
         send_to_home_assistant(dht_device.temperature, dht_device.humidity)
     except RuntimeError as error:
         # Errors happen fairly often, DHT's are hard to read, just keep going
         print(error.args[0])
-    time.sleep(config['polling_sleep_time_seconds'])
 
 
-while True:
-    sense()
+if __name__ == "__main__":
+    multiprocessing.set_start_method('spawn')
+    while True:
+        process = multiprocessing.Process(target=sense)
+        process.start()
+        process.join()
+        time.sleep(float(config['polling_sleep_time_seconds']))

roles/pi-dhtsensor-circuitpython/tasks/main.yml

@@ -0,0 +1,20 @@
+---
+- name: apt install libgpiod2
+  apt: name=libgpiod2 cache_valid_time=7200 state=present
+- name: pip install adafruit-circuitpython-dht
+  pip:
+    name: adafruit-circuitpython-dht
+    executable: pip3
+- name: Install script config
+  template: src=dht22_sensing.json dest=/etc/dht22_sensing.json
+- name: Install script
+  copy: src=dht22_sensing.py dest=/usr/bin/dht22_sensing owner=root mode=u+rwx
+- name: Install systemd service file
+  copy: src=dht22_sensing.service dest=/lib/systemd/system/
+- name: Add script to autostart and start now
+  systemd: name=dht22_sensing state=started enabled=yes daemon_reload=yes
+- name: Add to sysdweb
+  include_role:
+    name: pi-sysdweb
+  vars:
+    sysdweb_name: dht22_sensing

roles/pi-dhtsensor-circuitpython/templates/dht22_sensing.json

@@ -1,8 +1,8 @@
 {
-  "ha_url": "https://ha.bauer.tech",
-  "token": "eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiIxNjkxMWIzZmQ4ZWU0NDI0OTg0MjA0ZDllMDhkNGRlMCIsImlhdCI6MTU3ODE3MDU5MSwiZXhwIjoxODkzNTMwNTkxfQ.i7CdXEZy9DV9KPHAl-msK0rOfIUlPYo4zwwJ4UGhXuc",
-  "dht_pin": "D12",
-  "polling_sleep_time_seconds": 5,
+  "ha_url": "{{home_assistant_url}}",
+  "token": "{{home_assistant_token}}",
+  "dht_pin": "{{dht_pin}}",
+  "polling_sleep_time_seconds": "{{dht_polling_sleep_time_seconds}}",
 
   "ha_temp_sensor_name": "{{sensor_room_name_ascii|lower}}_dht22_temperatur",
   "ha_temp_friendly_name": "{{sensor_room_name}} Temperatur",

roles/pi-dhtsensor/defaults/main.yml

@@ -0,0 +1,3 @@
+---
+dht_pin: 12
+dht_polling_sleep_time_seconds: 20

roles/pi-dhtsensor/files/dht22_sensing.py

@@ -0,0 +1,93 @@
+#!/usr/bin/python3
+# -*- coding: utf-8 -*-
+
+import requests
+import json
+import time
+import Adafruit_DHT
+
+config = json.load(open("/etc/dht22_sensing.json"))
+
+
+class Filter:
+    def __init__(self, filter_length, max_mean_deviation):
+        self._length = filter_length
+        self.values = []
+        self.max_mean_deviation = max_mean_deviation
+
+    def mean(self):
+        return sum(self.values) / len(self.values)
+
+    def is_valid_value(self, val):
+        if len(self.values) == 0:
+            return True
+        else:
+            return abs(val - self.mean()) < self.max_mean_deviation
+
+    def add_if_valid(self, val):
+        if val is None:
+            return False
+
+        if self.is_valid_value(val):
+            self.values.append(val)
+            if len(self.values) > self._length:
+                self.values.pop(0)
+            return True
+        else:
+            return False
+
+
+def send_to_home_assistant(temperature, humidity):
+    # print(f"Sending temperature {temperature}, humidity {humidity}")
+    headers = {
+        'x-ha-access': config['token'],
+        'Authorization': "Bearer {}".format(config['token'])
+    }
+
+    temperature_url = "{}/api/states/sensor.{}".format(
+        config['ha_url'], config['ha_temp_sensor_name'])
+    temperatur_data = {
+        "state": "{:.1f}".format(temperature),
+        "attributes": {
+            "device_class": "temperature",
+            "friendly_name": config['ha_temp_friendly_name'],
+            "unit_of_measurement": "°C"
+        }
+    }
+    requests.post(temperature_url, json=temperatur_data, headers=headers)
+
+    humidity_url = "{}/api/states/sensor.{}".format(
+        config['ha_url'], config['ha_humidity_sensor_name'])
+    humidity_data = {
+        "state": "{:.1f}".format(humidity),
+        "attributes": {
+            "device_class": "humidity",
+            "friendly_name": config['ha_humidity_friendly_name'],
+            "unit_of_measurement": "%"
+        }
+    }
+    requests.post(humidity_url, json=humidity_data, headers=headers)
+
+
+if __name__ == "__main__":
+    temp_filter = Filter(4, 10)
+    humidity_filter = Filter(4, 10)
+
+    while True:
+        sensor = Adafruit_DHT.DHT22
+        humidity, temperature = Adafruit_DHT.read_retry(
+            sensor, config['dht_pin'])
+
+        temp_valid = temp_filter.add_if_valid(temperature)
+        humidity_valid = humidity_filter.add_if_valid(humidity)
+        if not (temp_valid and humidity_valid):
+            print(
+                f"Discarding value {temperature}C  / {humidity}%, because to far from means {temp_filter.mean()}C, {humidity_filter.mean()}%")
+        else:
+            try:
+                send_to_home_assistant(temperature, humidity)
+            except Exception as e:
+                print("Failed sending to home assistant")
+                print(e)
+
+        time.sleep(float(config['polling_sleep_time_seconds']))

roles/pi-dhtsensor/files/dht22_sensing.service

@@ -0,0 +1,10 @@
+[Unit]
+Description=DHT22 Temperature Humidity Sensing
+After=network.target
+
+[Service]
+Type=simple
+ExecStart=/usr/bin/dht22_sensing
+
+[Install]
+WantedBy=multi-user.target

roles/pi-dhtsensor/tasks/main.yml

@@ -0,0 +1,31 @@
+---
+# Use the deprecated version here instead, not the new circuitpython adafruit-circuitpython-dht version
+# the new version needs a lot of CPU time and doesn't work correctly on old raspi 1
+# a copy of the deprecated repo is downloaded as zip (if it goes away)
+
+- name: Uninstall libgpiod2 (circuitpython) if present
+  apt: name=libgpiod2 cache_valid_time=7200 state=absent
+- name: pip uninstall adafruit-circuitpython-dht
+  pip:
+    name: adafruit-circuitpython-dht
+    executable: pip3
+    state: absent  
+    extra_args: "--break-system-packages"
+- name: pip install adafruit-dht
+  pip:
+    name: adafruit-dht
+    executable: pip3
+    extra_args: "--break-system-packages"
+- name: Install script config
+  template: src=dht22_sensing.json dest=/etc/dht22_sensing.json
+- name: Install script
+  copy: src=dht22_sensing.py dest=/usr/bin/dht22_sensing owner=root mode=u+rwx
+- name: Install systemd service file
+  copy: src=dht22_sensing.service dest=/etc/systemd/system/
+- name: Add script to autostart and start now
+  systemd: name=dht22_sensing state=restarted enabled=yes daemon_reload=yes
+- name: Add to sysdweb
+  include_role:
+    name: pi-sysdweb
+  vars:
+    sysdweb_name: dht22_sensing

roles/pi-dhtsensor/templates/dht22_sensing.json

@@ -0,0 +1,12 @@
+{
+  "ha_url": "{{home_assistant_url}}",
+  "token": "{{home_assistant_token}}",
+  "dht_pin": "{{dht_pin}}",
+  "polling_sleep_time_seconds": "{{dht_polling_sleep_time_seconds}}",
+
+  "ha_temp_sensor_name": "{{sensor_room_name_ascii|lower}}_dht22_temperatur",
+  "ha_temp_friendly_name": "{{sensor_room_name}} Temperatur",
+
+  "ha_humidity_sensor_name": "{{sensor_room_name_ascii|lower}}_dht22_luftfeuchtigkeit",
+  "ha_humidity_friendly_name": "{{sensor_room_name}} Luftfeuchtigkeit"
+}

roles/pi-hifiberry-amp/handlers/main.yml

@@ -0,0 +1,4 @@
+---
+- name: reboot
+  reboot:
+

roles/pi-hifiberry-amp/meta/main.yml

@@ -0,0 +1,3 @@
+---
+dependencies:
+  - role: pi-alsasetup

roles/pi-hifiberry-amp/tasks/main.yml

@@ -0,0 +1,13 @@
+---
+- name: Deactivate normal audio
+  lineinfile:
+    path: /boot/config.txt
+    regexp: "^#?dtparam=audio=on"
+    line: "#dtparam=audio=on"
+  notify: reboot
+- name: Activate Hifiberry
+  lineinfile:
+    path: /boot/firmware/config.txt
+    regexp: "^#?dtoverlay=hifiberry-amp"
+    line: "dtoverlay={{hifiberry_overlay}}"
+  notify: reboot

roles/pi-irserver/files/hauppauge.rem

@@ -0,0 +1,53 @@
+[REMOTE]
+  [NAME]hauppauge
+
+[TIMING]
+  [0][N]0[RC]2[RP]87[FREQ]36[RC5]
+
+[COMMANDS]
+  [BTN_1][T]0[D]11011110000001
+  [BTN_2][T]0[D]11011110000010
+  [BTN_3][T]0[D]11011110000011
+  [BTN_4][T]0[D]11011110000100
+  [BTN_5][T]0[D]11011110000101
+  [BTN_6][T]0[D]11011110000110
+  [BTN_7][T]0[D]11011110000111
+  [BTN_8][T]0[D]11011110001000
+  [BTN_9][T]0[D]11011110001001
+  [BTN_0][T]0[D]11011110000000
+  [KEY_NUMERIC_STAR][T]0[D]11011110001010
+  [KEY_NUMERIC_POUND][T]0[D]11011110001110
+  [KEY_RED][T]0[D]11011110001011
+  [KEY_GREEN][T]0[D]11011110101110
+  [KEY_YELLOW][T]0[D]11011110111000
+  [KEY_BLUE][T]0[D]11011110101001
+  [KEY_PLAY][T]0[D]11011110110101
+  [KEY_PAUSE][T]0[D]11011110110000
+  [KEY_RECORD][T]0[D]11011110110111
+  [KEY_PREVIOUS][T]0[D]11011110110010
+  [KEY_FORWARD][T]0[D]11011110110100
+  [KEY_REWIND][T]0[D]11011110100100
+  [KEY_FASTFORWARD][T]0[D]11011110011110
+  [KEY_VOLUMEUP][T]0[D]11011110010000
+  [KEY_VOLUMEDOWN][T]0[D]11011110010001
+  [KEY_CHANNELUP][T]0[D]11011110100000
+  [KEY_CHANNELDOWN][T]0[D]11011110100001
+  [KEY_MUTE][T]0[D]11011110001111
+  [KEY_CHANNEL][T]0[D]11011110010010
+  [KEY_EXIT][T]0[D]11011110011111
+  [KEY_MENU][T]0[D]11011110001101
+  [KEY_LEFT][T]0[D]11011110010110
+  [KEY_RIGHT][T]0[D]11011110010111
+  [KEY_UP][T]0[D]11011110010100
+  [KEY_DOWN][T]0[D]11011110010101
+  [KEY_OK][T]0[D]11011110100101
+  [KEY_POWER][T]0[D]11011110111101
+  [KEY_GOTO][T]0[D]11011110111011
+  [KEY_TV][T]0[D]11011110011100
+  [KEY_VIDEOS][T]0[D]11011110011000
+  [KEY_MUSIC][T]0[D]11011110011001
+  [KEY_PICTURES][T]0[D]11011110011010
+  [KEY_GUIDE][T]0[D]11011110011011
+  [KEY_RADIO][T]0[D]11011110001100
+  [KEY_STOP][T]0[D]11011110110110
+ 

roles/pi-irserver/files/irserver.readme

@@ -0,0 +1,9 @@
+downloaded from  
+http://www.irtrans.de/de/download/linux.php
+
+build on raspberry pi using
+
+make arm_noccfgcc
+
+-> linker errors with libzip
+-> installed libzip-dev and added lzip to linker parameters

roles/pi-irserver/files/irserver.service

@@ -0,0 +1,10 @@
+[Unit]
+Description=IR server for IR remotes
+After=multi-user.target
+
+[Service]
+Type=simple
+ExecStart=/usr/bin/irserver /dev/ttyUSB0
+
+[Install]
+WantedBy=multi-user.target

roles/pi-irserver/tasks/main.yml

@@ -0,0 +1,16 @@
+---
+- name: Copy irserver
+  copy: src=irserver dest=/usr/bin/irserver mode=u+rx
+- name: Make config dir for remotes
+  file: path=/usr/bin/remotes state=directory
+- name: Copy hauppauge remote
+  copy: src=hauppauge.rem dest=/usr/bin/remotes/
+- name: Copy irserver systemd file
+  copy: src=irserver.service dest=/lib/systemd/system/
+- name: Enable irserver autostart
+  systemd: name=irserver state=restarted enabled=yes daemon_reload=yes
+- name: Add irserver to sysdweb
+  include_role:
+    name: pi-sysdweb
+  vars:
+    sysdweb_name: irserver

roles/pi-knxd/README

@@ -0,0 +1,32 @@
+Infos zum Stick
+  http://busware.de/tiki-index.php?page=TUL
+
+Blog mit Tutorial:
+    https://www.meintechblog.de/2018/07/tul-stick-als-knx-ip-gateway-auf-dem-raspberry-pi-einrichten-mit-knxd/
+
+
+Programmieren
+--------------
+apt-get -y install dfu-programmer
+
+Beim Einstecken des Sticks programmiertaste auf unterseite gedrueckt halten
+
+sudo dfu-programmer atmega32u4 erase && sudo dfu-programmer atmega32u4 flash TPUARTtransparent.hex && sudo dfu-programmer atmega32u4 reset && sudo reboot
+
+
+
+udev-rules
+----------
+
+udevadm info -a -n /dev/ttyACM0 | grep '{idProduct}' | head -n1
+udevadm info -a -n /dev/ttyACM0 | grep '{idVendor}' | head -n1
+udevadm info -a -n /dev/ttyACM0 | grep '{serial}' | head -n1
+
+# my KNX stick
+SUBSYSTEM=="tty", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="204b", ATTRS{serial}=="8543934393935171A0B1", SYMLINK+="ttyKNX"
+
+# z-wave stick
+SUBSYSTEM=="tty", ATTRS{idVendor}=="0658", ATTRS{idProduct}=="0200", SYMLINK+="ttyZWave"
+
+# HomeMatic stick (for fhem)
+SUBSYSTEM=="tty", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="204b", ATTRS{product}=="CUL868", SYMLINK+="ttyHomeMatic"

roles/pi-knxd/TPUARTtransparent.hex

@@ -0,0 +1,255 @@
+:1000000093C00000ACC00000AAC00000A8C000005F
+:10001000A6C00000A4C00000A2C00000A0C0000054
+:100020009EC000009CC0000008C40000CBC30000BC
+:1000300096C0000094C0000092C0000090C0000074
+:100040008EC000008CC000008AC0000088C0000084
+:1000500086C0000084C0000082C0000080C0000094
+:100060007EC0000081C000007AC0000078C000009F
+:1000700076C0000074C0000072C0000070C00000B4
+:100080006EC000006CC000006AC0000068C00000C4
+:1000900066C0000064C0000062C0000060C00000D4
+:1000A0005EC000005CC000005AC0000012011001D8
+:1000B00002000008EB034B2001000102DC010902F1
+:1000C0003E00020100C032090400000102020100EA
+:1000D000052400100104240206052406000107057A
+:1000E00082030800FF09040100020A00000007055E
+:1000F0000402100001070583021000010403090433
+:1001000018036200750073007700610072006500DB
+:100110002E006400650000003003540050005500BC
+:10012000410052005400000011241FBECFEFDAE05E
+:10013000DEBFCDBF11E0A0E0B1E0E8EBFFE002C020
+:1001400005900D92AC31B107D9F712E0ACE1B1E006
+:1001500001C01D92A034B107E1F76FD02BC750CF7B
+:1001600088980895889808951F920F920FB60F925D
+:1001700011242F933F938F939F93CF93DF93EF930C
+:10018000FF939091CE008EB38430D9F4C8EAD1E0C9
+:10019000E881F98190838881998101969983888388
+:1001A0002E813F818217930721F48C819D81998351
+:1001B00088832FB7F8948A859B8501969B878A87C9
+:1001C0002FBFFF91EF91DF91CF919F918F913F9141
+:1001D0002F910F900FBE0F901F901895089580E0FB
+:1001E00091E03CC680E091E012C684B7877F84BF6F
+:1001F00088E10FB6F89480936000109260000FBE03
+:1002000080E090E020E80FB6F8942093610080939E
+:1002100061000FBE809A8898B8D287E690E09093EC
+:10022000CD008093CC0086E28093CA0082E0809368
+:10023000C80088E98093C9000895EF92FF920F9358
+:100240001F93CF93DF93D1DFECE1F1E02FB7F89468
+:1002500088E291E091838083938382839583848372
+:1002600088EA91E09783868380E890E09187808791
+:10027000138612862FBFE8EAF1E02FB7F89484EBDB
+:1002800091E091838083938382839583848384E345
+:1002900092E09783868380E890E091878087138639
+:1002A00012862FBF889878940CE111E088EAE82E36
+:1002B00081E0F82E8EB391B39E7F20E0843009F464
+:1002C00021E0922B91BB8FB7F894209126013091B9
+:1002D00027018FBF809124019091250128173907AC
+:1002E00001F180E091E0E8D497FD1BC08898E80117
+:1002F000E881F98180838881998101969983888337
+:100300002E813F818217930721F48C819D819983EF
+:1003100088832FB7F8948A859B8501969B878A8767
+:100320002FBF8FB7F894C091B201D091B3018FBFA6
+:10033000209721F18898E091AA01F091AB0180E02B
+:1003400091E060813FD58823C9F4F70182819381D0
+:10035000019693838283268137818217930721F444
+:1003600084819581938382832FB7F89482859385C6
+:100370000197938782872FBF2197E9F62FB7F894CB
+:1003800080912601909127012FBF892BF1F0889849
+:10039000E801EA81FB813191FB83EA838E819F81B1
+:1003A000E817F90721F48C819D819B838A832FB7FD
+:1003B000F8948A859B8501979B878A872FBF8091B8
+:1003C000C80085FFFCCF3093CE0080E091E0E3D4FD
+:1003D0005FD470CFDA01923049F0933061F0913000
+:1003E000F9F4ECEAF0E022E130E01EC0EEEBF0E0E0
+:1003F0002EE330E019C0813049F0813018F08230AE
+:1004000079F408C0ECEFF0E0849107C0E0E0F1E09F
+:10041000849103C0E8E1F1E08491282F30E004C02A
+:10042000E0E0F0E020E030E0ED93FC93C9010895B6
+:100430009C0140913E0250913F024617570718F425
+:10044000F90190E044C06115710511F0AB01F8CFDE
+:100450008091E8008E778093E80040E050E0F0CF94
+:100460008EB3882309F444C0853009F443C08091D9
+:10047000E80083FF02C081E008958091E80082FDDA
+:1004800031C08091E80080FF22C08091F3009091FC
+:10049000F200782F60E0292F30E0262B372B07C0A1
+:1004A00081918093F100415050402F5F3F4F4115A3
+:1004B000510519F02830310598F390E028303105C6
+:1004C00009F491E08091E8008E778093E80041156F
+:1004D000510531F6992321F605C08EB3882341F0EA
+:1004E000853041F08091E80082FFF7CF80E00895E9
+:1004F00082E0089583E008959C0140913E0250916E
+:100500003F024617570718F4F90190E045C06115FE
+:10051000710511F0AB01F8CF8091E8008E778093E0
+:10052000E80040E050E0F0CF8EB3882309F446C0E5
+:10053000853009F445C08091E80083FF02C081E066
+:1005400008958091E80082FD33C08091E80080FF2B
+:1005500023C08091F3009091F200782F60E0292F62
+:1005600030E0262B372B08C084918093F100319620
+:10057000415050402F5F3F4F4115510519F0283031
+:10058000310590F390E02830310509F491E0809135
+:10059000E8008E778093E8004115510529F69923EC
+:1005A00009F0C2CF05C08EB3882341F0853041F0F9
+:1005B0008091E80082FFF7CF80E0089582E00895FF
+:1005C00083E008958F708093E9008091EB00816053
+:1005D0008093EB001092ED006093EC004093ED00EF
+:1005E0008091EE00881F8827881F08950F931F931E
+:1005F000CF93DF93062FEC0110E02AC09881992356
+:1006000029F16B81E981FA812C81892F8F708730E4
+:1006100018F5223010F452E001C056E040E028E026
+:1006200030E003C04F5F220F331F2E173F07D0F378
+:100630006295660F660F607C991F9927991F692B39
+:100640004295407F452BBEDF882331F01F5F259602
+:100650001017A0F281E001C080E0DF91CF911F91DF
+:100660000F9108958091380288238CF403C08EB3D3
+:100670008823B1F08091E80082FFF9CF8091E800F3
+:100680008B778093E80008958EB3882349F080919A
+:10069000E80080FFF9CF8091E8008E778093E80032
+:1006A00008954091E4005091E50024E68091EC002B
+:1006B00080FF23C08091E80080FD1DC08EB3882399
+:1006C00011F482E00895853011F483E0089580915B
+:1006D000EB0085FF02C081E008958091E4009091D5
+:1006E000E5008417950711F3222311F484E008959F
+:1006F0002150AC01DBCF80E008958091E80082FFBB
+:10070000DDCFF9CFEF92FF920F931F934ED055D0CC
+:1007100008ED10E0F80180818F7780838081806808
+:10072000808380818F7D808319BC1EBA1092340231
+:10073000109236021092350280EEE82EF12CF7016D
+:1007400080818B7F8083F80180818160808380E05D
+:1007500060E042E037DFE1EEF0E080818E7F808371
+:10076000E2EEF0E080818160808380818860808318
+:10077000F70180818E7F8083F80180818061808392
+:100780001F910F91FF90EF900895E8EDF0E08081C8
+:100790008F7E8083E7EDF0E080818160808384E05C
+:1007A00082BF81E080933702ADCFE8EDF0E0808139
+:1007B0008E7F80831092E20008951092DA001092EA
+:1007C000E10008951F920F920FB60F9211241F930C
+:1007D0002F933F934F935F936F937F938F939F9349
+:1007E000AF93BF93EF93FF931091E9008091EC00DA
+:1007F0001092E9008091F000877F8093F000789458
+:10080000E0D01092E9008091F00088608093F000C1
+:100810001F701093E900FF91EF91BF91AF919F91ED
+:100820008F917F916F915F914F913F912F911F9188
+:100830000F900FBE0F901F9018951F920F920FB63A
+:100840000F9211242F933F934F935F936F937F9356
+:100850008F939F93AF93BF93EF93FF938091E100AA
+:1008600082FF0AC08091E20082FF06C08091E10011
+:100870008B7F8093E1000BD28091DA0080FF1BC058
+:100880008091D80080FF17C08091DA008E7F80931E
+:10089000DA008091D90080FF0BC080E189BD82E140
+:1008A00089BD09B400FEFDCF81E08EBB59DC03C0D9
+:1008B00019BC1EBA57DC8091E10080FF17C08091FF
+:1008C000E20080FF13C08091E2008E7F8093E200FF
+:1008D0008091E20080618093E2008091D800806284
+:1008E0008093D80019BC85E08EBBD1D18091E10006
+:1008F00084FF2CC08091E20084FF28C080E189BD84
+:1009000082E189BD09B400FEFDCF8091D8008F7DC2
+:100910008093D8008091E1008F7E8093E1008091E8
+:10092000E2008F7E8093E2008091E20081608093FC
+:10093000E20080913402882331F48091E30087FD46
+:1009400002C081E001C084E08EBBA1D18091E100B2
+:1009500083FF26C08091E20083FF22C08091E100E6
+:10096000877F8093E10082E08EBB109234028091F9
+:10097000E1008E7F8093E1008091E2008E7F809382
+:10098000E2008091E20080618093E20080E060E01C
+:1009900042E018DE8091F00088608093F00077D10B
+:1009A000FF91EF91BF91AF919F918F917F916F9147
+:1009B0005F914F913F912F910F900FBE0F901F901D
+:1009C00018951F93DF93CF93CDB7DEB7AC970FB6D3
+:1009D000F894DEBF0FBECDBFE8E3F2E08091F100F6
+:1009E000819322E0E034F207C9F7F9DB8091E80057
+:1009F00083FF35C18091380230913902353009F4D6
+:100A000087C0363040F43130C9F1313070F03330C6
+:100A100009F025C133C0383009F4F4C0393009F485
+:100A200003C1363009F01BC195C0803821F08238EF
+:100A300009F015C108C090913502809136028823D3
+:100A400099F0926011C080913C028F708093E90010
+:100A50008091EB0090E025E0969587952A95E1F747
+:100A6000982F91701092E9008091E800877F809321
+:100A7000E8009093F1001092F100CFC0882319F0A4
+:100A8000823009F0ECC090E08F719070009721F0F7
+:100A9000029709F0E4C00CC080913A02813009F05D
+:100AA000DEC010923602333069F5809336022AC0D8
+:100AB00080913A02882331F520913C022F7009F48D
+:100AC000CEC02093E9008091EB0080FF1BC0333043
+:100AD00021F48091EB00806213C08091EB00806173
+:100AE0008093EB0081E090E002C0880F991F2A9567
+:100AF000E2F78093EA001092EA008091EB008860B0
+:100B00008093EB001092E9008091E800877F88C015
+:100B1000882309F0A4C010913A021F778091E30066
+:100B20008078812B8093E3008091E800877F809319
+:100B3000E80098DD8091E80080FFFCCF8091E30021
+:100B400080688093E300112311F482E001C083E008
+:100B50008EBB85C08058823008F081C080913A02F7
+:100B600090913B0223E08C3D920709F033C083E073
+:100B70008C838AE28B837FB7F894DE0115966EE052
+:100B800040E050E011E2E62FF0E01093570084912E
+:100B900040FF03C082958F706F5F8F70282F30E009
+:100BA0008A3018F0C901C79602C0C901C0968D935A
+:100BB0009D934F5F5F4F4431510529F77FBF80916F
+:100BC000E800877F8093E800CE0103966AE270E038
+:100BD0002FDC12C060913C02AE014F5F5F4FFADB29
+:100BE000BC01009709F43BC08091E800877F8093A7
+:100BF000E80089819A8180DC8091E8008B7780937E
+:100C0000E8002DC0803859F58091E800877F8093F7
+:100C1000E800809134028093F1008091E8008E77A3
+:100C20008093E8001FDD1BC08823C9F490913A022D
+:100C30009230A8F48091E800877F8093E800909339
+:100C4000340210DD80913402882331F48091E30076
+:100C500087FD02C081E001C084E08EBBC3DA8091D1
+:100C6000E80083FF0AC08091E800877F8093E80056
+:100C70008091EB0080628093EB00AC960FB6F89405
+:100C8000DEBF0FBECDBFCF91DF911F9108950895B4
+:100C90001F938EB3882371F01091E9008091EC00CE
+:100CA0001092E9008091E80083FF01C08ADE1F7086
+:100CB0001093E9001F910895FC018EB3843099F5DB
+:100CC00084899589A689B7890097A105B10559F14D
+:100CD00086818F708093E9008091E80082FF23C0B5
+:100CE0004091F3002091F200942F80E030E0822BBD
+:100CF000932B892B19F46FEF7FEF04C08091F100E3
+:100D0000682F70E04091F3002091F200942F80E072
+:100D100030E0822B932B892B41F48091E8008B7774
+:100D20008093E80002C06FEF7FEFCB010895089534
+:100D3000FC018EB3843051F584899589A689B789E1
+:100D40000097A105B10511F181818F708093E900B1
+:100D50004091F3002091F200942F80E030E0822B4C
+:100D6000932B892BA9F09091E8008091E8008E7771
+:100D70008093E80095FD0CC094DC982F882349F4FB
+:100D80008091E8008E778093E80003C092E001C074
+:100D900090E0892F0895FC018EB3843091F484890A
+:100DA0009589A689B7890097A105B10551F0818180
+:100DB0008F708093E9008091E80080FF02C0CF012E
+:100DC000B7CF08951F93FC01162F8EB38430E1F442
+:100DD00084899589A689B7890097A105B105A1F0F5
+:100DE00081818F708093E9008091E80085FD08C0C3
+:100DF0008091E8008E778093E80053DC882329F403
+:100E00001093F10080E001C082E01F910895CF931C
+:100E1000DF93EC014096FC018BE0DF011D928A9587
+:100E2000E9F782E08C83898783E08E87CE01019683
+:100E300061E0DCDB882371F0CE01069661E0D6DB51
+:100E4000882341F0CE010B9661E0D0DB882319F0B6
+:100E500081E001C080E0DF91CF910895CF93DF93CF
+:100E6000EC018091E80083FFA2C0888190E020918E
+:100E70003C0230913D022817390709F098C0809153
+:100E80003902813269F0823220F4803209F08FC059
+:100E90003CC0823209F46AC0833209F088C079C04C
+:100EA00080913802813A09F082C08091E800877F02
+:100EB0008093E8008091E80080FFFCCF8C899D89B9
+:100EC000AE89BF898093F100292F3A2F4B2F5527E8
+:100ED0002093F1009D01442755272093F1008B2F8B
+:100EE0009927AA27BB278093F100888D8093F10072
+:100EF000898D8093F1008A8D8093F1008091E800C4
+:100F00008E778093E800AEDB52C080913802813248
+:100F100009F04DC08091E800877F8093E80004C00D
+:100F20008EB3882309F443C08091E80082FFF8CF94
+:100F30008091F1009091F1002091F1003091F10049
+:100F40008C8B9D8B2E8B3F8B8091F100888F8091B5
+:100F5000F100898F8091F1008A8F8091E8008B7772
+:100F60008093E8007FDBCE0139D921C0809138021F
+:100F70008132E9F48091E800877F8093E80072DB9A
+:100F800080913A0290913B02998B888BCE01CFDE03
+:100F90000EC080913802813251F48091E800877F41
+:100FA0008093E8005FDBCE0160913A02C0DEDF9102
+:080FB000CF910895F894FFCFE2
+:100FB80000831000000104100000018208000001F5
+:0C0FC8000000000000000000000000001D
+:00000001FF

roles/pi-knxd/flash-firmware.sh

@@ -0,0 +1,8 @@
+#!/bin/bash
+
+apt-get -y install dfu-programmer
+
+dfu-programmer atmega32u4 erase
+dfu-programmer atmega32u4 flash TPUARTtransparent.hex
+dfu-programmer atmega32u4 reset
+

roles/pi-lirc/tasks/main.yml

@@ -0,0 +1,26 @@
+---
+- name: Install lirc
+  apt:
+    name: lirc
+- name: Install config file lirc_options.conf
+  copy: src=lirc_options.conf dest=/etc/lirc/lirc_options.conf
+- name: Install config file lircd.conf
+  copy: src=lircd.conf dest=/etc/lirc/lircd.conf
+- name: Install remote file
+  copy: src=hauppauge.conf dest=/etc/lirc/hauppauge.conf
+- name: Activate overlay in boot config
+  lineinfile:
+    path: /boot/firmware/config.txt
+    regexp: "^#?dtoverlay=gpio-ir"
+    line: "dtoverlay=gpio-ir,gpio_pin=17"
+  register: boot_overlay
+- name: Restart lircd
+  systemd: name=lircd state=started enabled=yes daemon_reload=yes
+- name: Reboot if boot overlay changed
+  reboot:
+  when: boot_overlay.changed
+- name: Add to sysdweb
+  include_role:
+    name: pi-sysdweb
+  vars:
+    sysdweb_name: lircd

roles/pi-shairport/defaults/main.yml

@@ -0,0 +1,3 @@
+---
+shairport_sync_version: "3.3.5"
+shairport_name: Unnamed Raspberry with shairport

roles/pi-shairport/meta/main.yml

@@ -0,0 +1,3 @@
+---
+dependencies:
+  - role: pi-alsasetup

roles/pi-shairport/tasks/main.yml

@@ -0,0 +1,38 @@
+---
+- name: Apt install dependencies
+  apt:
+    cache_valid_time: 7200
+    state: present
+    name:
+      - build-essential
+      - git
+      - xmltoman
+      - autoconf
+      - automake
+      - libtool
+      - libpopt-dev
+      - libconfig-dev
+      - libasound2-dev
+      - avahi-daemon
+      - libavahi-client-dev
+      - libssl-dev
+      - libsoxr-dev
+- name: Build and Install Shairport sync (may take a while)
+  script: "build-shairport-sync.sh ${shairport_sync_version}"
+  args:
+    creates: /usr/local/bin/shairport-sync
+- name: Copy config
+  template: src=shairport-sync.conf dest=/etc/shairport-sync.conf
+- name: Modify service file to run as root
+  lineinfile:
+    path: /lib/systemd/system/shairport-sync.service
+    regexp: "^#?User="
+    line: "User=root"
+- name: Restart shairport-sync
+  systemd: name=shairport-sync state=restarted enabled=yes daemon_reload=yes
+- name: Add to sysdweb
+  include_role:
+    name: pi-sysdweb
+  vars:
+    sysdweb_name: shairport-sync
+    

roles/pi-sispmctl/files/sispmctl.service

@@ -0,0 +1,36 @@
+[Unit]
+Description=SiS PM Control for Linux
+Wants=network-online.target
+After=network-online.target
+Wants=systemd-udev-settle.service
+After=systemd-udev-settle.service
+
+[Install]
+WantedBy=multi-user.target
+
+[Service]
+CapabilityBoundingSet=
+LockPersonality=true
+MemoryDenyWriteExecute=true
+NoNewPrivileges=true
+PrivateTmp=true
+PrivateUsers=true
+ProtectClock=true
+ProtectControlGroups=true
+ProtectHome=true
+ProtectKernelModules=true
+ProtectKernelTunables=true
+ProtectSystem=strict
+RemoveIPC=true
+RestrictAddressFamilies=AF_INET AF_INET6
+RestrictNamespaces=true
+RestrictRealtime=true
+SystemCallFilter=@system-service
+SystemCallArchitectures=native
+UMask=177
+
+Type=forking
+ExecStart=/usr/bin/sispmctl -p 2638 -l
+SyslogIdentifier=sispmctl
+Restart=always
+RestartSec=5

roles/pi-sispmctl/tasks/main.yml

@@ -0,0 +1,21 @@
+---
+- name: Check if sispmctl already exists
+  stat: path=/usr/bin/sispmctl
+  register: sispmctl_file
+- name: Install dependencies
+  apt: name="libusb-dev" cache_valid_time=7200 state=present
+- name: Copy sispmctl sources
+  unarchive: src=sispmctl-4.7.tar.gz dest=/tmp
+  when: sispmctl_file.stat.exists == false
+- name: Build and install
+  shell: cd /tmp/sispmctl*/ && ./configure --prefix=/usr && make install
+  when: sispmctl_file.stat.exists == false
+- name: Install systemd service file
+  copy: src=sispmctl.service dest=/lib/systemd/system/
+- name: Add script to autostart and start now
+  systemd: name=sispmctl state=started enabled=yes daemon_reload=yes
+- name: Add to sysdweb
+  include_role:
+    name: pi-sysdweb
+  vars:
+    sysdweb_name: sispmctl

roles/pi-squeezelite-custom/custom build/readme_build.md

@@ -0,0 +1,47 @@
+
+Repository: https://github.com/ralph-irving/squeezelite.git
+Version: c89faf3280c5dca3f04906a4ff7796a0043e99f0
+
+
+Packages to build:
+      - libmad0
+      - libmpg123-0
+      - libflac8
+      - libvorbisfile3
+      - libfaad2
+      # for building libssl-dev, libasound2-dev, libflac-dev, libvorbis-dev, libsoxr-dev, libfaad-dev, libmad0-dev, libmpg123-dev
+
+Adapted makefile.rpi 
+#OPTS = -DRESAMPLE -DDSD -DUSE_SSL -DLINKALL -I./include -I./include/opus -I./include/alac -I/usr/local/include -s -mfpu=vfp -mfloat-abi=hard -march=armv6zk -mtune=arm1176jzf-s
+
+
+
+Old
+---
+
+
+Repository: https://github.com/ralph-irving/squeezelite.git
+Version: 779fe9035a2dfcaeeb5335497a012d5e7241a409
+
+Custom Makefile based on Makefile.rpi:
+
+```Makefile
+OPTS = -DLINUX -DUSE_SSL -DLINKALL -I./include -I./include/opus -I./include/alac -I/usr/local/include -s -march=armv6 -mfloat-abi=hard -mfpu=vfp
+  
+LDFLAGS=-L./lib -L/usr/local/lib -s -lgomp -lasound
+
+include Makefile
+```
+
+Required packages:
+```bash
+apt-get install libasound2 libasound2-dev libflac-dev libmad0-dev libfaad-dev libmpg123-dev libvorbis-dev
+```
+
+
+- no RPI switch (this is only when wanting to do switiching based on GPIO headers)
+- manually added -lasound (don't know why it wasn't in there)
+
+Then just build with 
+    make -f mymakefile (on a raspi)
+

roles/pi-squeezelite-custom/tasks/main.yml

@@ -0,0 +1,31 @@
+---
+- name: Uninstall system package of squeezelite
+  apt: name=squeezelite state=absent
+- name: Install dependencies
+  apt:
+    name:
+      - libmad0
+      - libmpg123-0
+      - libflac12
+      - libvorbisfile3
+      - libfaad2
+      # for building libssl-dev, libasound2-dev, libflac-dev, libvorbis-dev, libsoxr-dev, libfaad-dev, libmad0-dev, libmpg123-dev
+    state: present
+    cache_valid_time: 7200
+- name: Remove old config file if present
+  file: path=/etc/default/squeezelite state=absent
+- name: Copy over custom compile version of squeezelite
+  copy: src=squeezelite dest=/opt/squeezelite mode=700
+- name: Install systemd service file
+  template: src=squeezelite.service dest=/lib/systemd/system/
+- name: Enable sysdweb autostart
+  systemd: name=squeezelite state=restarted enabled=yes daemon_reload=yes
+- name: Add to sysdweb
+  include_role:
+    name: pi-sysdweb
+  vars:
+    sysdweb_name: squeezelite
+
+
+# build with adapted Makefile.rpi:
+#OPTS = -DRESAMPLE -DDSD -DUSE_SSL -DLINKALL -I./include -I./include/opus -I./include/alac -I/usr/local/include -s -mfpu=vfp -mfloat-abi=hard -march=armv6zk -mtune=arm1176jzf-s

roles/pi-squeezelite-custom/templates/squeezelite.service

@@ -0,0 +1,10 @@
+[Unit]
+Description=Squeezelite
+After=network.target
+
+[Service]
+ExecStart=/opt/squeezelite -n {{squeezelite_name}} -s {{squeezeserver}} -o softvol_squeezelite
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target

roles/pi-squeezelite/defaults/main.yml

@@ -0,0 +1,2 @@
+---
+squeezeserver: 192.168.178.80

roles/pi-squeezelite/handlers/main.yml

@@ -0,0 +1,3 @@
+---
+- name: restart-squeezelite
+  systemd: name=squeezelite state=restarted enabled=yes daemon_reload=yes

roles/pi-squeezelite/meta/main.yml

@@ -0,0 +1,3 @@
+---
+dependencies:
+  - role: pi-alsasetup

roles/pi-squeezelite/tasks/main.yml

@@ -0,0 +1,13 @@
+---
+- name: Apt install squeezelite package
+  apt: name=squeezelite cache_valid_time=7200 state=present
+  notify: restart-squeezelite
+- name: Install config file
+  template: src=squeezelite.cfg dest=/etc/default/squeezelite
+  notify: restart-squeezelite
+- name: Add to sysdweb
+  include_role:
+    name: pi-sysdweb
+  vars:
+    sysdweb_name: squeezelite
+    

roles/pi-squeezelite/templates/squeezelite.cfg

@@ -1,3 +1,3 @@
 SL_NAME="{{squeezelite_name}}"
 SL_SOUNDCARD="softvol_squeezelite"
-SB_SERVER_IP="192.168.178.80"
+SB_SERVER_IP="{{squeezeserver}}"

roles/pi-squeezeserver/files/source_url.txt

@@ -0,0 +1,2 @@
+#http://downloads.slimdevices.com/LogitechMediaServer_v7.9.2/logitechmediaserver_7.9.2_arm.deb
+https://downloads.slimdevices.com/LogitechMediaServer_v8.4.0/logitechmediaserver_8.4.0_arm.deb

roles/pi-squeezeserver/tasks/main.yml

@@ -0,0 +1,39 @@
+---
+- name: Install packages required for squeeze server
+  apt:
+    name:
+      - libsox-fmt-all
+      - libflac-dev
+      - libfaad2
+      - libmad0
+      - perl-openssl-abi-1.1
+      - libnet-ssleay-perl
+      - libio-socket-ssl-perl
+      - nasm
+      - build-essential
+      - iptables-persistent
+    cache_valid_time: 7200
+    state: present
+- name: copy squeezeserver package
+  copy: src=logitechmediaserver_8.4.0_arm.deb dest=/tmp
+- name: install squeezeserver package
+  apt: deb=/tmp/logitechmediaserver_8.4.0_arm.deb
+- name: Enable sysdweb autostart
+  systemd: name=logitechmediaserver state=started enabled=yes
+- name: Add to sysdweb
+  include_role:
+    name: pi-sysdweb
+  vars:
+    sysdweb_name: logitechmediaserver
+- name: Forward port 80 to 9000
+  iptables:
+    table: nat
+    chain: PREROUTING
+    in_interface: eth0
+    protocol: tcp
+    match: tcp
+    destination_port: "80"
+    jump: REDIRECT
+    to_ports: "9000"
+    comment: Redirect web traffic to port 9000
+

roles/pi-standard-setup/defaults/main.yml

@@ -0,0 +1,13 @@
+---
+wifi_ssid:    ""      # put SSID here to configure wifi
+ansible_user: "root"  # "User to connect with, put in 'pi' here if you connect the first time, else leave empty"
+new_hostname: ""      # set this to change the hostname
+
+
+timezone:                "Europe/Berlin"
+wifi_country:            "DE"
+wifi_pass_url:           "bauer_wifi"  # has to be in keepass with url "wifi_pass_url"
+ansible_ssh_pass:        "raspberry"
+ansible_become_password: "raspberry"
+ansible_become:          yes
+

roles/pi-standard-setup/files/motd/esszimmerradio

@@ -0,0 +1,12 @@
+  EsszimmerRadio Eltern
+  
+       ________
+      /______  |
+     |       | |      _
+     | ===== | |     | |
+     | ===== | |    o o
+     |       | |         |~
+     |  .-.  | |       o    o o
+     | ' . ' | |   |~       |_|
+  ..'| '._.' | |  o
+.'   |_______|/ 

roles/pi-standard-setup/files/motd/musicmouse

@@ -0,0 +1,7 @@
+     Music Mouse
+     
+          ___
+ _  _  .-'   '-.
+(.)(.)/         \   
+ /@@             ;
+o_\\-mm-......-mm`~~~~~~~~~~~~~~~~`

roles/pi-standard-setup/files/motd/musikserverwohnzimmeroben

@@ -0,0 +1,10 @@
+ 
+ Musik Server Wohnzimmer oben
+
+      |~~~~~~~~~~~~~~~|
+      |~~~~~~~~~~~~~~~|
+      |               |
+  /~~\|           /~~\|
+  \__/            \__/
+
+  

roles/pi-standard-setup/files/motd/octopi

@@ -0,0 +1,3 @@
+=================
+WELCOME TO OCTOPI
+=================

roles/pi-standard-setup/files/wifi-watchdog.sh

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+if /sbin/ifconfig wlan0 | /bin/grep -q "inet addr:" ; then
+  logger "Tested Inet connection - everything ok"
+  echo "Tested Inet connection - everything ok"
+else
+  logger "Network connection down! Attempting reconnection."
+  echo "Network connection down! Attempting reconnection."
+  /sbin/ifup --force wlan0
+fi

roles/pi-standard-setup/handlers/main.yml

@@ -0,0 +1,8 @@
+---
+- name: restart sshd
+  service:
+    name: sshd
+    state: restarted
+- name: reboot
+  reboot:
+

roles/pi-standard-setup/tasks/main.yml

@@ -0,0 +1,102 @@
+---
+- name: Do apt update/upgrade
+  apt: upgrade=yes update_cache=yes cache_valid_time=7200
+- name: Detect Raspi Model
+  slurp: src=/sys/firmware/devicetree/base/model
+  register: raspberry_model
+- name: Show Raspi Model
+  debug: msg={{ raspberry_model.content | b64decode }}
+- name: Add authorized SSH key to root account
+  authorized_key:
+    user: root
+    key: "{{ lookup('file', 'sshkey.pub') }}"
+    state: present
+- name: Activate root login with key
+  lineinfile:
+    path: /etc/ssh/sshd_config
+    regexp: "^#?PermitRootLogin"
+    line: "PermitRootLogin prohibit-password"
+  notify: restart sshd
+- name: Deactive SSH accepting locale vars (leads to warnings)
+  lineinfile:
+    path: /etc/ssh/sshd_config
+    regexp: "^#?AcceptEnv LANG LC_*"
+    line: "#AcceptEnv LANG LC_*"
+  notify: restart sshd
+- name: Get hostname
+  command: "raspi-config nonint get_hostname"
+  register: pi_hostname
+  changed_when: False
+- name: Change hostname  {{ new_hostname }}
+  command: "raspi-config nonint do_hostname {{ new_hostname }}"
+  when: new_hostname | bool and pi_hostname.stdout != new_hostname
+  register: set_hostname
+  notify: reboot
+- name: Get hostname
+  command: "raspi-config nonint get_hostname"
+  register: pi_hostname
+  changed_when: False
+- name: set boot mode to CLI
+  command: "raspi-config nonint do_boot_behaviour B1"
+#I2 Change Timezone
+- name: Change timezone
+  command: "raspi-config nonint do_change_timezone {{ timezone }}"
+- name: Change locale
+  command: "raspi-config nonint do_change_locale en_US.UTF-8"
+- name: Change password of default pi account
+  user:
+    name: pi
+    update_password: always
+    password: "{{ lookup('keepass', 'default_rpi_password') | password_hash('sha512')  }}"
+- name: Install Packages (vim, git, basic python stuff)
+  apt:
+    name:
+      - vim
+      - git
+      - python3
+      - python3-pip
+      - python3-wheel
+      - telnet
+    cache_valid_time: 7200
+    state: present
+- name: Copy vim config
+  copy: src=vimrc dest=/root/.vimrc
+- name: Copy git config
+  copy: src=gitconfig dest=/root/.gitconfig
+# Wifi
+- name: Get WiFi country
+  command: "raspi-config nonint get_wifi_country"
+  register: wifi_country
+  changed_when: False
+  ignore_errors: yes #to avoid error when WiFi is not present
+- name: Change WiFi country
+  command: "raspi-config nonint do_wifi_country {{ wifi_country }}"
+  when: configure_wifi
+- name: Set WiFi credentials
+  command: "raspi-config nonint do_wifi_ssid_passphrase {{ wifi_ssid }} {{ lookup('keepass', 'bauer_wifi') }}"
+  when: configure_wifi
+- name: Install watchdog
+  apt: name=watchdog cache_valid_time=7200 state=present
+  when: not wifi_ssid is defined 
+- name: Configure watchdog
+  blockinfile:
+    path: /etc/watchdog.conf
+    block: |
+      interface = wlan0
+      retry-timeout = 90
+      ping = {{router_ip}}
+      interval = 15
+  when: configure_wifi
+- name: Start watchdog
+  systemd: name=watchdog state=started enabled=yes daemon_reload=yes   # state=restarted not working, also not manually
+  when: configure_wifi
+# Message of the day
+- name: Set Message of the day
+  copy: src=motd/{{ pi_hostname.stdout }} dest=/etc/motd
+# LED off script
+- name: Copy led off script
+  copy: src=raspi-leds-off.sh dest=/usr/sbin/raspi-leds-off.sh mode="u+rwx"
+- name: Copy led off service
+  copy: src=raspi-leds-off.service dest=/lib/systemd/system/
+- name: Activate led off servic
+  systemd: name=raspi-leds-off state=restarted enabled=yes daemon_reload=yes

roles/pi-sysdweb/files/sysdweb-system.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=Control systemd services through Web or REST API
+Documentation=https://github.com/ogarcia/sysdweb
+After=network.target
+Requires=dbus.socket
+
+[Service]
+ExecStart=/usr/local/bin/sysdweb -p 10080 -l 0.0.0.0
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target