Martin Bauer
6b9b50ef2e
- HiFiBerry: the plain hifiberry-dacplus overlay makes the Pi the I2S clock consumer, which the Pi 5's controller refuses (snd_soc_dai_set_fmt -22). The card never probed, so every softvol_* device was dead: squeezelite crash-looped and the backend and shairport played into nothing. hifiberry-dacplus-std has the Pi drive the clocks. pi_hifiberry_amp now matches any dtoverlay=hifiberry-* line, so changing the overlay replaces the old one instead of adding a second. - X: with two DRM devices (v3d, vc4) Xorg gave up with "Cannot run in framebuffer mode", and the kiosk looped on a blank screen. 99-vc4.conf points it at vc4, the display controller; rendering still goes to V3D (glxinfo: V3D 7.1, accelerated). - The front-end's icons are emoji in the markup. The Lite image has no emoji font, so they rendered as empty boxes: install fonts-noto-color-emoji. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
41 lines
2.0 KiB
YAML
41 lines
2.0 KiB
YAML
---
|
|
squeezelite_name: Wohnzimmer
|
|
pi_shairport_name: _Oben_Wohnzimmer
|
|
alsa_card_name: sndrpihifiberry
|
|
sensor_room_name_ascii: wohnzimmeroben
|
|
sensor_room_name: WohnzimmerOben
|
|
# -std: the Pi drives the I2S clocks. The plain dacplus overlay makes the Pi the clock
|
|
# consumer, which the Pi 5's I2S controller rejects (snd_soc_dai_set_fmt -22), so the
|
|
# card never probes and every softvol_* device is dead.
|
|
hifiberry_overlay: hifiberry-dacplus-std
|
|
main_user: root
|
|
|
|
mediapi_has_hifiberry_amp: true
|
|
mediapi_ir_control: irserver
|
|
# Off for the Pi 5: the legacy Adafruit_DHT library bit-bangs the BCM283x registers,
|
|
# which the Pi 5 no longer has (GPIO sits behind the RP1 chip), so the poller cannot
|
|
# work there. Needs a libgpiod-based replacement before this goes back to true.
|
|
mediapi_has_dhtsensor: false
|
|
|
|
# Raspberry Pi 5. The SD card came from a Pi 4, whose image has no Pi 5 kernel.
|
|
pi_standard_setup_install_pi5_kernel: true
|
|
# The Pi is fed 5V through the HiFiBerry board's GPIO header, not USB-C, so it cannot
|
|
# negotiate a 5A supply and would cap USB current at 600mA.
|
|
hifiberry_powers_pi: true
|
|
|
|
# Display-only MusicMouse instance: no physical mouse attached, shown on the monitor
|
|
# via pi_kiosk instead. See roles/pi_musicmouse/files/config-musicdolphin.yml.
|
|
mediapi_install_kidsmusic: true
|
|
# The native Slint front-end is not deployed here; the browser kiosk is the front-end.
|
|
mediapi_install_slint_frontend: false
|
|
mediapi_has_monitor: true
|
|
# Temporarily a debuggable desktop rather than a locked-down kiosk: Openbox root menu,
|
|
# visible pointer, Firefox in a normal window. Set back to "kiosk" when done.
|
|
pi_kiosk_mode: debug
|
|
# ?pi=1 is the front-end's Raspberry Pi profile (web/src/lib/lowPower.ts): the ambient
|
|
# canvas at a quarter of the pixels and 30fps, the progress bar re-rendering ten times
|
|
# a second instead of sixty, and no backdrop blur. Drop the parameter in the address
|
|
# bar to compare against the full-fat version on the same machine.
|
|
pi_kiosk_url: "http://localhost:8080/?pi=1"
|
|
musicmouse_version: deploy/musicdolphin
|