Martin Bauer
f434429dd1
The SD card moves over as is, so: - pi_standard_setup can install the Pi 5 kernel (linux-image-rpi-2712, an arm64 package on the armhf userland), which a Pi 4 image lacks. Opt-in via pi_standard_setup_install_pi5_kernel. - The Pi is powered through the HiFiBerry board's GPIO header, so it cannot negotiate a 5A supply and would cap USB at 600mA. pi_hifiberry_amp sets usb_max_current_enable=1 when hifiberry_powers_pi is true (default false). - The DHT22 poller is off: Adafruit_DHT bit-bangs BCM283x registers, which the Pi 5 no longer has (GPIO sits behind the RP1 chip). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
17 lines
801 B
YAML
17 lines
801 B
YAML
---
|
|
pi_standard_setup_wifi_ssid: "" # put SSID here to configure wifi
|
|
ansible_user: "root" # "User to connect with, put in 'pi' here if you connect the first time, else leave empty"
|
|
pi_standard_setup_new_hostname: "" # set this to change the hostname
|
|
|
|
pi_standard_setup_timezone: "Europe/Berlin"
|
|
pi_standard_setup_wifi_country: "DE"
|
|
pi_standard_setup_wifi_pass_url: "bauer_wifi" # has to be in keepass with url "wifi_pass_url"
|
|
ansible_ssh_pass: "raspberry"
|
|
ansible_become_password: "raspberry"
|
|
ansible_become: true
|
|
|
|
# Install the Pi 5 (BCM2712) kernel, kernel_2712.img (an arm64 package, hence the :arm64 on
|
|
# the armhf userland). A card imaged on a Pi 4 does not have
|
|
# it, and a Pi 5 will not boot without. Harmless on a Pi 4, which keeps its own kernel.
|
|
pi_standard_setup_install_pi5_kernel: false
|