updates

arbeitszimmer_oben_ble_tracker.yaml

@@ -0,0 +1,41 @@
+
+
+esphome:
+  name: arbeitszimmer-oben-ble-tracker
+
+esp32:
+  board: m5stack-atom
+  framework:
+    type: arduino
+
+logger:
+
+ota:
+  password: !secret ota_password  
+
+wifi:
+  ssid: WLAN
+  password: !secret wifi_password  
+
+mqtt:
+  broker: homeassistant.fritz.box
+  username: !secret mqtt_ble_username
+  password: !secret mqtt_ble_password
+  discovery: false
+
+esp32_ble_tracker:
+  scan_parameters:
+    interval: 1.2s
+    window: 500ms
+    active: false
+  on_ble_advertise:
+    - then:
+      - lambda: |-
+          auto build_json = [&](JsonObject obj) {
+            obj["rssi"] = x.get_rssi();
+            obj["address"] = x.address_str();
+            obj["address_uint64"] = x.address_uint64();
+            if(x.get_tx_powers().size() > 0)
+              obj["tx_power"] = x.get_tx_powers()[0];
+          };
+          global_mqtt_client->publish_json("my_btmonitor/raw_measurements/az_oben", build_json);

garten_bus_controller.yaml

@@ -111,13 +111,13 @@ packages:
       name: "ventil-sprinkler-westen"
       dev_addr: 0x1
       register_addr: 0x03
-  #relay04: !include
+  relay04: !include
-  #  file: "modbus_relay.yaml"
+    file: "modbus_relay.yaml"
-  #  vars:
+    vars:
-  #    cid: relayboard32
+      cid: relayboard32
-  #    name: "ventil-gartenhaus-kein-rohr-angeschlossen"
+      name: "ventil-giessanlage-vorne"
-  #    dev_addr: 0x1
+      dev_addr: 0x1
-  #    register_addr: 0x04
+      register_addr: 0x04
   relay05: !include
     file: "modbus_relay.yaml"
     vars:
@@ -125,13 +125,13 @@ packages:
       name: "ventil-sprinkler-sud"
       dev_addr: 0x1
       register_addr: 0x05
-  #relay06: !include
+  relay06: !include
-  #  file: "modbus_relay.yaml"
+    file: "modbus_relay.yaml"
-  #  vars:
+    vars:
-  #    cid: relayboard32
+      cid: relayboard32
-  #    name: "ventil-gartenhaus-kein-ventil-angeschlossen"
+      name: "ventil-beet-sued"
-  #    dev_addr: 0x1
+      dev_addr: 0x1
-  #    register_addr: 0x06
+      register_addr: 0x06
   relay07: !include
     file: "modbus_relay.yaml"
     vars:

gartenhaus_taster_input.yaml

@@ -1,10 +1,6 @@
 
 esphome:
   name: gartenhaus-taster-input
-  includes: 
-    - my_btmonitor.h
-  libraries:
-    - mbedtls
 
 esp32:
   board: esp32-poe
@@ -22,7 +18,6 @@ api:
 ota:
   password: !secret ota_password
 
-
 ethernet:
   type: LAN8720
   mdc_pin: GPIO23
@@ -158,8 +153,6 @@ binary_sensor:
     device_class: LIGHT
 
 
-
-
 mqtt:
   broker: homeassistant.fritz.box
   username: !secret mqtt_ble_username
@@ -175,17 +168,18 @@ esp32_ble_tracker:
   on_ble_advertise:
     - then:
       - lambda: |-
-          const char * detected_device_name = ble_device_name(x.address());
-          if(detected_device_name != nullptr) {
           auto build_json = [&](JsonObject obj) {
-               obj["id"] = detected_device_name;
             obj["rssi"] = x.get_rssi();
+            obj["address"] = x.address_str();
+            obj["address_uint64"] = x.address_uint64();
             if(x.get_tx_powers().size() > 0)
               obj["tx_power"] = x.get_tx_powers()[0];
           };
-            global_mqtt_client->publish_json(std::string("my_btmonitor/devices/") + detected_device_name + "/garten",
+          global_mqtt_client->publish_json("my_btmonitor/raw_measurements/garten", build_json);
-                                             build_json);
+
-          }
+
+
+
 
 
     #on_multi_click:

led_controller_gartenhaus.yaml

@@ -91,7 +91,7 @@ light:
     id: gartenhaus_wandlicht
     name: Gartenhaus Wandlicht
     pin: 3
-    num_leds: 305
+    num_leds: 306
     is_rgbw: true
     rmt_channel: 0
     effects:

m5stackfire.yaml

@@ -1,17 +1,24 @@
 esphome:
   name: m5stackfire
-  includes: 
+
-    - my_btmonitor.h
+external_components:
-  libraries:
+  - source:
-    - mbedtls
+      type: git
-  platformio_options:
+      url: https://github.com/ssieb/custom_components
-    board_upload.flash_size: 16MB
+    components: [ip5306]
-    board_build.partitions: "../../../m5stackfire_partition.csv"
+  - source:
+      type: local
+      path: ./my_components
 
 esp32:
   board: m5stack-fire
+  flash_size: 16MB
+  #framework:
+  #  type: arduino
   framework:
-    type: arduino
+    type: esp-idf
+    
+psram:
 
 substitutions:
   friendly_name: "M5StackFire"
@@ -23,6 +30,7 @@ api:
     - service: mhz19_calibrate_zero
       then:
         - mhz19.calibrate_zero: my_mhz19
+
 wifi:
   ssid: WLAN
   password: !secret wifi_password
@@ -33,11 +41,6 @@ ota:
 logger:
 
 # Power Management
-external_components:
-  - source:
-      type: git
-      url: https://github.com/ssieb/custom_components
-    components: [ip5306]
 
 ip5306:
   battery_level:
@@ -80,7 +83,7 @@ switch:
     pin: 32
     name: "Backlight"
     id: backlight
-    restore_mode: ALWAYS_ON
+    restore_mode: ALWAYS_OFF
 
 light:
   #- platform: monochromatic # backlight
@@ -111,42 +114,44 @@ light:
         from: 5
         to: 9
 
-
 i2c:
   sda: 21
   scl: 22
   scan: True
 
 # Display
-#spi:
+spi:
-#  clk_pin: 18
+  clk_pin: 18
-#  mosi_pin: 23
+  mosi_pin: 23
-#  miso_pin: 19
+  miso_pin: 19
-#
+
-#font:
+font:
-#  - file: "gfonts://Roboto"
+  - file: "gfonts://Roboto"
-#    id: roboto
+    id: roboto
-#    size: 18
+    size: 18
-#
+
-#image:
+image:
-#  - file: m5stack_display.png
+  - file: m5stack_display.png
-#    id: img_background
+    id: img_background
-#    type: RGB24
+    type: RGB24
-#
+
-#
+
-#display:
+display:
-#  - platform: ili9xxx
+  - platform: ili9xxx
-#    model: M5STACK
+    model: M5STACK
-#    cs_pin: 14
+    spi_mode: MODE3
-#    dc_pin: 27
+    data_rate: 20MHz
-#    reset_pin: 33
+    cs_pin: 14
-#    id: my_display
+    dc_pin: 27
-#    lambda: |-
+    reset_pin: 33
-#      it.image(0, 0, id(img_background));
+    update_interval: 20s
-#      it.printf(240, 67, id(roboto), Color(255, 255, 255), TextAlign::TOP_CENTER, "%.0f ppm", id(co2value).state );
+    id: my_display
-#      it.printf(240, 125, id(roboto), Color(255, 255, 255), TextAlign::TOP_CENTER, "%.1f °C", id(co2temp).state );
+    lambda: |-
-#      it.printf(240, 184, id(roboto), Color(255, 255, 255), TextAlign::TOP_CENTER, "%.1f %%", id(m5stackfire_dht22_humidity).state );
+      it.image(0, 0, id(img_background));
-#
+      it.printf(240, 67, id(roboto), Color(255, 255, 255), TextAlign::TOP_CENTER, "%.0f ppm", id(co2value).state );
+      it.printf(240, 125, id(roboto), Color(255, 255, 255), TextAlign::TOP_CENTER, "%.1f °C", id(co2temp).state );
+      it.printf(240, 184, id(roboto), Color(255, 255, 255), TextAlign::TOP_CENTER, "%.1f %%", id(m5stackfire_dht22_humidity).state );
+
 
 uart:
   id: uart_co2
@@ -175,30 +180,32 @@ sensor:
       id: m5stackfire_dht22_humidity
       name: "DHT22 humidity"
 
-mqtt:
+# BTLE doesn't work - not enough RAM
-  broker: homeassistant.fritz.box
+# PSRAM isn't usable because chip is wired to same pins as UART PORT-C :(
-  username: !secret mqtt_ble_username
-  password: !secret mqtt_ble_password
-  discovery: false
-
-esp32_ble_tracker:
-  scan_parameters:
-    interval: 1.2s
-    window: 500ms
-    active: false
-  on_ble_advertise:
-    - then:
-      - lambda: |-
-          const char * detected_device_name = ble_device_name(x.address());
-          if(detected_device_name != nullptr) {
-            auto build_json = [&](JsonObject obj) {
-               obj["id"] = detected_device_name;
-               obj["rssi"] = x.get_rssi();
-               if(x.get_tx_powers().size() > 0)
-                obj["tx_power"] = x.get_tx_powers()[0];
-            };
-            global_mqtt_client->publish_json(std::string("my_btmonitor/devices/") + detected_device_name + "/az_oben",
-                                             build_json);
-          }
 
+#
+#mqtt:
+#  broker: homeassistant.fritz.box
+#  username: !secret mqtt_ble_username
+#  password: !secret mqtt_ble_password
+#  discovery: false
+#
+#nimble_tracker:
 
+#esp32_ble_tracker:
+#  scan_parameters:
+#    interval: 1.2s
+#    window: 500ms
+#    active: false
+#  on_ble_advertise:
+#    - then:
+#      - lambda: |-
+#          auto build_json = [&](JsonObject obj) {
+#            obj["rssi"] = x.get_rssi();
+#            obj["address"] = x.address_str();
+#            obj["address_uint64"] = x.address_uint64();
+#            if(x.get_tx_powers().size() > 0)
+#               obj["tx_power"] = x.get_tx_powers()[0];
+#          };
+#          global_mqtt_client->publish_json("my_btmonitor/raw_measurements/az_oben", build_json);
+#

my_btmonitor.h

@@ -1,69 +0,0 @@
-#pragma once
-
-#include "mbedtls/aes.h"
-
-int bt_encrypt_be(const uint8_t *key, const uint8_t *plaintext, uint8_t *enc_data) {
-    mbedtls_aes_context ctx;
-    mbedtls_aes_init(&ctx);
-
-    if (mbedtls_aes_setkey_enc(&ctx, key, 128) != 0) {
-        mbedtls_aes_free(&ctx);
-        return -1;
-    }
-
-    if (mbedtls_aes_crypt_ecb(&ctx, MBEDTLS_AES_ENCRYPT, plaintext, enc_data) != 0) {
-        mbedtls_aes_free(&ctx);
-        return -1;
-    }
-
-    mbedtls_aes_free(&ctx);
-    return 0;
-}
-
-struct encryption_block {
-    uint8_t key[16];
-    uint8_t plain_text[16];
-    uint8_t cipher_text[16];
-};
-
-inline bool ble_ll_resolv_rpa(const uint8_t *rpa, const uint8_t *irk) {
-    struct encryption_block ecb;
-
-    auto irk32 = (const uint32_t *)irk;
-    auto key32 = (uint32_t *)&ecb.key[0];
-    auto pt32 = (uint32_t *)&ecb.plain_text[0];
-
-    key32[0] = irk32[0];
-    key32[1] = irk32[1];
-    key32[2] = irk32[2];
-    key32[3] = irk32[3];
-
-    pt32[0] = 0;
-    pt32[1] = 0;
-    pt32[2] = 0;
-    pt32[3] = 0;
-
-    ecb.plain_text[15] = rpa[5 - 3];
-    ecb.plain_text[14] = rpa[5 - 4];
-    ecb.plain_text[13] = rpa[5 - 5];
-
-    bt_encrypt_be(ecb.key, ecb.plain_text, ecb.cipher_text);
-
-    if (ecb.cipher_text[15] != rpa[5 - 0] || ecb.cipher_text[14] != rpa[5 - 1] || ecb.cipher_text[13] != rpa[5 - 2]) return false;
-
-    return true;
-}
-
-static const char * ble_device_name(const uint8_t * rpa) {
-  static constexpr uint8_t irk_martins_apple_watch[] = {0xaa, 0x67, 0x54, 0x2b, 0x82, 0xc0, 0xe0, 0x5d, 0x65, 0xc2, 0x7f, 0xb7, 0xe3, 0x13, 0xab, 0xa5};
-  static constexpr uint8_t irk_martins_iphone[] =      {0x84, 0x0e, 0x38, 0x92, 0x64, 0x4c, 0x1e, 0xbd, 0x15, 0x94, 0xa9, 0x06, 0x9c, 0x14, 0xce, 0x0d};
-  if(ble_ll_resolv_rpa(rpa, irk_martins_apple_watch)) {
-    return "martins_apple_watch";
-  }
-  else if(ble_ll_resolv_rpa(rpa, irk_martins_iphone)) {
-    return "martins_iphone";
-  }
-  else {
-    return nullptr;
-  }
-}