esphome:
  name: poolcoversensor

esp32:
  board: esp32-poe
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  password: !secret ota_password

ota:
  password: !secret ota_password

#wifi:
#  ssid: "WLAN"
#  password: !secret wifi_password
#
#  # Enable fallback hotspot (captive portal) in case wifi connection fails
#  ap:
#    ssid: "Poolcoversensor Fallback Hotspot"
#    password: !secret ota_password
#captive_portal:

ethernet:
  type: LAN8720
  mdc_pin: GPIO23
  mdio_pin: GPIO18
  clk_mode: GPIO17_OUT
  phy_addr: 0
  power_pin: GPIO12


sensor:
  - platform: ultrasonic
    trigger_pin: 4
    echo_pin: 36
    name: "Poolcover Einstieg Abstand"    
    icon: "mdi:door-sliding-open"
    update_interval: 1s
    timeout: 3m

binary_sensor:
  - platform: gpio
    device_class: opening
    name: "Poolcover Vorne Einstieg"
    icon: "mdi:waves-arrow-right"
    filters:
      - delayed_on: 100ms
    pin: 
      number: 16
      mode:
        input: true
        pullup: true
  - platform: gpio
    device_class: opening
    name: "Poolcover Mitte"
    icon: "mdi:waves-arrow-up"
    filters:
      - delayed_on: 100ms
    pin: 
      number: 15
      mode:
        input: true
        pullup: true
  - platform: gpio
    device_class: opening
    name: "Poolcover Ende"
    icon: "mdi:waves-arrow-left"
    filters:
      - delayed_on: 100ms
    pin: 
      number: 14
      mode:
        input: true
        pullup: true

# Those pins act as GND to be connected with the binary inputs
switch:
  - platform: gpio
    id: gndpin1
    pin: 13
    internal: true
  - platform: gpio
    id: gndpin2
    pin: 2
    internal: true
  - platform: gpio
    id: gndpin3
    pin: 5
    internal: true