- wire.with_figure: the device uses dataclasses.replace directly.
- DeviceConnected/DeviceDisconnected: emitted, never subscribed to, and a duplicate
of ConnectionChanged(target="firmware").
- ScreenService.toggle(): never called.
- GET /api/lirc (LircConfigOut, api.lircConfig): no front-end reads it.
- POST /api/volume's delta_percent (api.nudgeVolume): no front-end sends it.
- LibraryCache.shrink_stored_covers: a one-off migration that re-read every cover
header on every scan. _INDEX_VERSION 7 rebuilds any cache that could still need it.
- Firmware: the MFRC522 library and its unused globals (lib/nfc/rc522.c is the
driver in use), and mfrc_version.h, a reader test sketch nothing included.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
a7fb56c pinned mypy to Python 3.11 for the Pi. In a dev venv that also has the
analysis extra, numpy's stubs use 3.12 syntax, so mypy aborted on them before
checking a single file - and from the next day on four real errors went in
unnoticed (ebab03b, 0ef5a04, 9fd106b). Skip following numpy/librosa instead; only
librosa_analyzer.py touches them. Fix the four errors (variables reused with a
narrower type).
There is no CI, so scripts/check.sh is the gate: pytest, ruff, mypy, vitest, tsc
and eslint in one command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A figure folder that holds album folders instead of audio can play any of them,
up to six, in folder order (depth-first, alphabetical). Each is its own album,
titled "Fuchs - <folder>" and of the figure's kind. Putting the figure down plays
the album it played last, or the first, straight away; another figure placed in
between forgets the position in that album, not the album itself.
Meanwhile the ring offers all of them: one section per album from a fixed palette,
edges shifting towards the neighbours' hue, the selected one bright and wobbling.
The knob moves the selection one section per detent and wraps; pressing plays the
selected album, and left alone for 8 s the picker fades into the figure's colours
and the music carries on. While open, the device hands the knob to the picker
(`capture_knob`): turns do not change the volume and the press is not published to
Home Assistant. A tick per step and a confirm "pling" go with it.
The firmware only draws: one new ring effect, LED_WHEEL_EFFECT_SEGMENT_SELECT (23),
re-sent on every detent with the section to glide from. The look is tunable through
a temporary `general.figure_selection` config section until the right values
become constants.
Every UI sound - the screen's blubb, the parents' timer, the picker - now follows
the music volume with a floor, times a new parent-mode "Effekt-Lautstärke"
(`general.effects_volume`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Einfg on the kiosk keyboard, or Guide (KEY_EPG) on the IR remote, shows a big
analog watch over whatever page is open, built from the Delphin Uhr mockup
without its swimming dolphin. The overlay stays mounted and is only hidden, so it
appears at once. Beside the watch, only while they run:
- The bus: on school days, a silent countdown to `general.clock.bus_time` (07:25)
that starts `bus_lead_minutes` (60) before. School days skip weekends and the
school and public holidays of `general.clock.subdivision` (DE-BY), fetched daily
from openholidaysapi.org and cached under the library cache. A badge on the
clock says whether there is school today, and why not.
- The dolphin timer, set in parent mode (5/10/15/30 minutes, or until a time).
It lives in the backend, so a parent's phone can start it for the kiosk. When it
runs out the kiosk opens the clock at 00:00 and a soft bell chimes on the
device; it clears after a minute, or at the next key, tap or remote press.
Parent mode is now a way in rather than a page: `?parentMode=1` adds a 🔧 button
next to the ⌨ one, or an "Eltern" tab in the phone's dock, so the URL can stay
bookmarked. The timer comes first there, the device settings below it.
Unmapped IR buttons are logged at debug level, to find out what irserver calls a
new one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Next to the five volume bars, a − and a + button move the volume by
`volume_increment` device units, the same step as the IR remote's volume keys and
the rotary encoder, via a new `{steps}` form of POST /api/volume. The bars still
jump to a percentage.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With `general.screen.off_command` set, the monitor switches off once nothing has
played and nobody has done anything for `auto_off_minutes` (15 by default, 0 for
never, editable in parent mode). "Doing anything" is any intent a person could
have caused: a remote key, a web command, or a key press or tap in the kiosk,
which the page reports at most every 30s via POST /api/screen/activity. The first
such intent after an auto-off runs `on_command`, so the remote wakes the screen
too. The auto-off itself is silent; switches a person asks for still blubb.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The IR remote's digits and the kiosk keyboard's number keys now both emit
PlayRemoteSlotRequested, and one reaction resolves the slot for either (a podcast
show to its newest episode, an album to the album). POST /api/remote/press/{digit}
is the keyboard's way in. Mid-search a digit is still part of the query.
A remote slot can start one song instead of a whole album: `track_index` on an
album slot plays from that track, then the rest of the album. Shift+A on the play
screen arms "this song" where A arms "this album", and the assign popup offers
both. A series slot cannot name a song, and an index past the album's end is
rejected when saving.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A show folder under Kinderpodcasts/ opts in by containing a feed.txt marker
naming its RSS feed. A new PodcastFeedService polls every such feed every 6
hours (and once at startup), downloads any episode not already on disk using
the existing YYYYMMDD - Title.ext convention, and triggers the same
rescan-and-broadcast sequence "Bibliothek neu einlesen" already uses - now
shared via App.rescan_library() instead of duplicated. A show with no
feed.txt is untouched, so there is no new config section for this.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
