Commit Graph

13 Commits

Author SHA1 Message Date
d465a74cde Figures: several albums per figure, picked on the LED ring
A figure folder that holds album folders instead of audio can play any of them,
up to six, in folder order (depth-first, alphabetical). Each is its own album,
titled "Fuchs - <folder>" and of the figure's kind. Putting the figure down plays
the album it played last, or the first, straight away; another figure placed in
between forgets the position in that album, not the album itself.

Meanwhile the ring offers all of them: one section per album from a fixed palette,
edges shifting towards the neighbours' hue, the selected one bright and wobbling.
The knob moves the selection one section per detent and wraps; pressing plays the
selected album, and left alone for 8 s the picker fades into the figure's colours
and the music carries on. While open, the device hands the knob to the picker
(`capture_knob`): turns do not change the volume and the press is not published to
Home Assistant. A tick per step and a confirm "pling" go with it.

The firmware only draws: one new ring effect, LED_WHEEL_EFFECT_SEGMENT_SELECT (23),
re-sent on every detent with the section to glide from. The look is tunable through
a temporary `general.figure_selection` config section until the right values
become constants.

Every UI sound - the screen's blubb, the parents' timer, the picker - now follows
the music volume with a floor, times a new parent-mode "Effekt-Lautstärke"
(`general.effects_volume`).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-04 00:29:18 +02:00
a55cc4f67f Clock: a "Delphin Uhr" overlay with the school bus and a parents' timer
Einfg on the kiosk keyboard, or Guide (KEY_EPG) on the IR remote, shows a big
analog watch over whatever page is open, built from the Delphin Uhr mockup
without its swimming dolphin. The overlay stays mounted and is only hidden, so it
appears at once. Beside the watch, only while they run:

- The bus: on school days, a silent countdown to `general.clock.bus_time` (07:25)
  that starts `bus_lead_minutes` (60) before. School days skip weekends and the
  school and public holidays of `general.clock.subdivision` (DE-BY), fetched daily
  from openholidaysapi.org and cached under the library cache. A badge on the
  clock says whether there is school today, and why not.
- The dolphin timer, set in parent mode (5/10/15/30 minutes, or until a time).
  It lives in the backend, so a parent's phone can start it for the kiosk. When it
  runs out the kiosk opens the clock at 00:00 and a soft bell chimes on the
  device; it clears after a minute, or at the next key, tap or remote press.

Parent mode is now a way in rather than a page: `?parentMode=1` adds a 🔧 button
next to the ⌨ one, or an "Eltern" tab in the phone's dock, so the URL can stay
bookmarked. The timer comes first there, the device settings below it.

Unmapped IR buttons are logged at debug level, to find out what irserver calls a
new one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-03 19:45:45 +02:00
077c4e819f Screen: switch off by itself when nothing is going on
With `general.screen.off_command` set, the monitor switches off once nothing has
played and nobody has done anything for `auto_off_minutes` (15 by default, 0 for
never, editable in parent mode). "Doing anything" is any intent a person could
have caused: a remote key, a web command, or a key press or tap in the kiosk,
which the page reports at most every 30s via POST /api/screen/activity. The first
such intent after an auto-off runs `on_command`, so the remote wakes the screen
too. The auto-off itself is silent; switches a person asks for still blubb.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-03 19:42:59 +02:00
459599d2ba Number keys: the keyboard's digits work like the remote's; a key can hold one song
The IR remote's digits and the kiosk keyboard's number keys now both emit
PlayRemoteSlotRequested, and one reaction resolves the slot for either (a podcast
show to its newest episode, an album to the album). POST /api/remote/press/{digit}
is the keyboard's way in. Mid-search a digit is still part of the query.

A remote slot can start one song instead of a whole album: `track_index` on an
album slot plays from that track, then the rest of the album. Shift+A on the play
screen arms "this song" where A arms "this album", and the assign popup offers
both. A series slot cannot name a song, and an index past the album's end is
rejected when saving.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-03 19:41:34 +02:00
2d0caeb732 IR remote: power key switches the screen; count irserver's repeats
KEY_POWER emits ToggleScreenRequested, which a new ScreenService turns into the
optional general.screen.toggle_command (musicdolphin: ansible's kiosk-screen). It is
a service, not a reaction, so the subprocess runs in its own task instead of holding
the bus; a press while one is still running is dropped, and failures, hangs and a
missing command are only logged.

irserver reports every line of a held button as repeat 00, so a slightly long press
on Next skipped several tracks and Power would switch the screen off and on again.
A line of the same button within 0.25s of the previous one now counts as a repeat.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-03 16:13:22 +02:00
fa3d92189c Keep only the newest 50 episodes of each podcast
A show that has published for years is unbounded: GEOlino Spezial alone is 358
episodes and 5.8 GB, and the device it syncs onto is a 30 GB SD card that also
holds the rest of the library. Nothing stopped the 6-hourly poll from eventually
filling it.

Cap each show's folder at general.podcast_episode_limit (default 50, null to
keep everything), pruning the oldest past that after each sync pass.

The same limit caps what is downloaded, and it has to be one number for both.
Prune to the newest N but keep fetching everything the feed offers, and every
poll would re-download exactly the episodes the previous one deleted - forever,
at full size, since missing_episodes() decides purely from what is on disk.
There is a test for that specific loop.

Pruning only touches files named the way this module names them
(YYYYMMDD - Title.ext), so feed.txt, folder.jpg, the failed-download record and
anything placed by hand are all left alone; a parse that fails means "not ours",
not "delete it". An episode's sidecar cover goes with it. A pass that only
deleted still reports a change, because the library needs the rescan just as
much as it does after a download.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-19 20:40:53 +02:00
fd6283718c Analyse tracks in a pool of worker processes
A first pass over an unanalysed library is hours of librosa, and there was no
reason for a desktop to spend them one core at a time. Analysis now runs in a
process pool sized by `general.library.analysis_workers`, defaulting to one per
core bar one (capped at 8) when the key is absent.

Two consequences worth knowing before touching this: whatever an `Analyzer`
returns has to be picklable, and an analyzer that keeps state on its own
instance - a test double counting calls - only behaves as written with
`analysis_workers=1`.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-19 18:04:01 +02:00
f7a5d24d8d Add backend support for the typing game: curriculum, progress, and reward unlocks
Moves the typing app's lesson plan and progress from client-side YAML/localStorage
into the backend, and adds a reward system that ties passing a lesson to unlocking
part of the music library. Lock state is always recomputed live from curriculum x
progress x the live library, never persisted separately.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-09-12 21:03:45 +02:00
747c390303 Add IR remote control (LIRC) with a number-key content mapping
Adds a TCP client for lircd's classic protocol: play/pause/next/prev/
volume/mute map to the same intents every other front-end already
emits, and number keys 0-9 play an assigned album/audiobook from the
start or a podcast show's newest episode, resolved fresh on every
press. The mapping is configured in config.yml and editable from the
frontend: a small "Taste zuweisen" button on the play screen (or the
A+digit keyboard shortcut) opens a 10-key picker to assign whatever is
currently playing.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-09-11 08:31:28 +02:00
a8ed350aec Add "Mein Zimmer" room-control page (Home Assistant, proxied through the backend)
Implements the room-control page from the design mockup: a scenes row above cards
for shutters, color lamps, and brightness-only lamps, all driven by a new
`general.ha` config section (server URL, token, ordered device/scene lists).

The backend proxies every Home Assistant call server-side (GET/POST /api/ha/...)
rather than the browser calling Home Assistant directly, so the long-lived token
never leaves the LAN device and Home Assistant's own CORS settings don't need to
know about musicmouse at all. Card kind (shutter/color/brightness-only) is
inferred at runtime from what Home Assistant reports about each entity, not
configured explicitly.

Also stops tracking python-backend/config.yml, which had drifted into the repo
despite its own header saying it shouldn't be - it now carries real credentials
locally and needs to stay untracked.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-08-27 23:45:29 +02:00
edb6e5e027 Web frontend 2026-08-27 12:32:20 +02:00
d44c24ec97 Full rearchitecture using Claude
- event bus systen
- all components are independent
- preparation for web frontend
2026-08-26 13:22:28 +02:00
7aa7fe4693 Claude cleanup 2026-08-26 10:38:56 +02:00