oklchToRgb read the colour back from the browser's CSS engine and expected
rgb(...). Current Chromium (the kiosk's 153) resolves an oklch colour to
oklch(...), so the match failed and every swatch fell back to [255, 255, 255]:
tapping a colour set the light to white. It now does the OKLab maths itself.
Also log a Home Assistant call that fails in the proxy: httpx only logs a
request once it has a response, so a call that timed out left no trace.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The remote's hauppauge.rem names the Guide button KEY_GUIDE, not lircd's
KEY_EPG, so the remote never toggled the clock.
The overlay is now hidden by opacity rather than display: none, so it is
already laid out and painted when Pos1 or Guide shows it. The drop-shadow
filter on the whole watch is gone (it re-rendered and re-blurred the dial on
every second-hand tick), the hands sit on their own layers, and the bubbles
and countdown cards only exist while the clock is on screen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- python-backend/README: track analysis is implemented (2e0e6ad); the cache layout,
the module table (lirc, screen, timers, podcasts, tippen) and the route table
(track analysis, HA proxy, typing game) were missing pieces.
- docs/REPO_OVERVIEW: Mein Zimmer and the clock are implemented; Home Assistant is
also reached over HTTP through the room page's proxy, not MQTT only; the IR remote,
scripts/, the optional config sections and figure kind were not mentioned.
- web/README: the key table was the mockup's (Ctrl transport keys, TAB over 'all');
?pi=1 is now a preset with per-browser overrides, not a read-once flag; the room
page and the typing game exist; eslint is part of the checks.
- Docstrings that described earlier designs: HaConfig (written as browser-direct in
the same commit that built the proxy, a8ed350), services/__init__, events,
playback, media, colors, tippen progress and AppHeader, lowPower.ts, and the
'Hoerbuecher' spelling.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- wire.with_figure: the device uses dataclasses.replace directly.
- DeviceConnected/DeviceDisconnected: emitted, never subscribed to, and a duplicate
of ConnectionChanged(target="firmware").
- ScreenService.toggle(): never called.
- GET /api/lirc (LircConfigOut, api.lircConfig): no front-end reads it.
- POST /api/volume's delta_percent (api.nudgeVolume): no front-end sends it.
- LibraryCache.shrink_stored_covers: a one-off migration that re-read every cover
header on every scan. _INDEX_VERSION 7 rebuilds any cache that could still need it.
- Firmware: the MFRC522 library and its unused globals (lib/nfc/rc522.c is the
driver in use), and mfrc_version.h, a reader test sketch nothing included.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The hub sent every open tab a full snapshot on every StateEvent, LED writes
included - placing and removing a figure was 13 snapshots, 9 of them for LED
changes the snapshot does not even contain. List the events that matter, and make
a test fail when a new StateEvent is sorted into neither list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A figure folder that holds album folders instead of audio can play any of them,
up to six, in folder order (depth-first, alphabetical). Each is its own album,
titled "Fuchs - <folder>" and of the figure's kind. Putting the figure down plays
the album it played last, or the first, straight away; another figure placed in
between forgets the position in that album, not the album itself.
Meanwhile the ring offers all of them: one section per album from a fixed palette,
edges shifting towards the neighbours' hue, the selected one bright and wobbling.
The knob moves the selection one section per detent and wraps; pressing plays the
selected album, and left alone for 8 s the picker fades into the figure's colours
and the music carries on. While open, the device hands the knob to the picker
(`capture_knob`): turns do not change the volume and the press is not published to
Home Assistant. A tick per step and a confirm "pling" go with it.
The firmware only draws: one new ring effect, LED_WHEEL_EFFECT_SEGMENT_SELECT (23),
re-sent on every detent with the section to glide from. The look is tunable through
a temporary `general.figure_selection` config section until the right values
become constants.
Every UI sound - the screen's blubb, the parents' timer, the picker - now follows
the music volume with a floor, times a new parent-mode "Effekt-Lautstärke"
(`general.effects_volume`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Einfg on the kiosk keyboard, or Guide (KEY_EPG) on the IR remote, shows a big
analog watch over whatever page is open, built from the Delphin Uhr mockup
without its swimming dolphin. The overlay stays mounted and is only hidden, so it
appears at once. Beside the watch, only while they run:
- The bus: on school days, a silent countdown to `general.clock.bus_time` (07:25)
that starts `bus_lead_minutes` (60) before. School days skip weekends and the
school and public holidays of `general.clock.subdivision` (DE-BY), fetched daily
from openholidaysapi.org and cached under the library cache. A badge on the
clock says whether there is school today, and why not.
- The dolphin timer, set in parent mode (5/10/15/30 minutes, or until a time).
It lives in the backend, so a parent's phone can start it for the kiosk. When it
runs out the kiosk opens the clock at 00:00 and a soft bell chimes on the
device; it clears after a minute, or at the next key, tap or remote press.
Parent mode is now a way in rather than a page: `?parentMode=1` adds a 🔧 button
next to the ⌨ one, or an "Eltern" tab in the phone's dock, so the URL can stay
bookmarked. The timer comes first there, the device settings below it.
Unmapped IR buttons are logged at debug level, to find out what irserver calls a
new one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Next to the five volume bars, a − and a + button move the volume by
`volume_increment` device units, the same step as the IR remote's volume keys and
the rotary encoder, via a new `{steps}` form of POST /api/volume. The bars still
jump to a percentage.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With `general.screen.off_command` set, the monitor switches off once nothing has
played and nobody has done anything for `auto_off_minutes` (15 by default, 0 for
never, editable in parent mode). "Doing anything" is any intent a person could
have caused: a remote key, a web command, or a key press or tap in the kiosk,
which the page reports at most every 30s via POST /api/screen/activity. The first
such intent after an auto-off runs `on_command`, so the remote wakes the screen
too. The auto-off itself is silent; switches a person asks for still blubb.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The IR remote's digits and the kiosk keyboard's number keys now both emit
PlayRemoteSlotRequested, and one reaction resolves the slot for either (a podcast
show to its newest episode, an album to the album). POST /api/remote/press/{digit}
is the keyboard's way in. Mid-search a digit is still part of the query.
A remote slot can start one song instead of a whole album: `track_index` on an
album slot plays from that track, then the rest of the album. Shift+A on the play
screen arms "this song" where A arms "this album", and the assign popup offers
both. A series slot cannot name a song, and an index past the album's end is
rejected when saving.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ScreenService plays a synthesised two-bubble "blubb" (musicmouse.blubb) after each
switch, through aplay on the music's ALSA device at the player's volume: rising for
on, falling for off, going by the last word the toggle command prints. Nothing plays
with simulated audio or at volume 0. Built from samples rather than shipped as a
file, like the front-end's WebAudio blips, so its loudness follows the volume.
Del maps to a new "screen" action on every page, which App.tsx sends to the new
POST /api/screen/toggle only when the page is served from localhost - the kiosk on
the device - so Del on a tablet does not switch off a screen in another room.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
KEY_POWER emits ToggleScreenRequested, which a new ScreenService turns into the
optional general.screen.toggle_command (musicdolphin: ansible's kiosk-screen). It is
a service, not a reaction, so the subprocess runs in its own task instead of holding
the bus; a press while one is still running is dropped, and failures, hangs and a
missing command are only logged.
irserver reports every line of a held button as repeat 00, so a slightly long press
on Next skipped several tracks and Power would switch the screen off and on again.
A line of the same button within 0.25s of the previous one now counts as a repeat.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
irserver (musicdolphin's IRTrans daemon) serves lircd's network protocol on port 8765,
but sends "key_play hauppauge" where lircd sends "KEY_PLAY Hauppauge", so every press
was dropped. Uppercase button names when parsing and compare the remote name
case-insensitively.
irserver also always reports repeat 00, so a held transport button is not debounced
there; volume ramps as intended.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shrinking the covers changed nothing on the device, twice over, because two layers were
independently serving the old bytes and each had the same wrong premise written into its
comment: that a cover is "content-addressed by album id". The id addresses which album
the art belongs to. The bytes behind the URL change whenever the art is reprocessed.
The backend sent `public, max-age=604800`, so every browser that had loaded the page in
the previous week kept decoding the 3000px original out of its own disk cache without
asking. It now sends `no-cache`, which does not mean "do not store" but "revalidate
before reusing" - the file stays cached and the usual answer is a 304.
The service worker cached covers cache-first on a URL that never changes, which means a
client could serve a stale cover for ever; bumping the cache name fixed today's covers
and would have had to be done again for the next batch. It now does
stale-while-revalidate: the cached copy is returned immediately, so a grid of album art
still never waits on the network, and a fresh copy is fetched behind the page for next
time. Neither layer needs a version bump when art is reprocessed again.
The revalidation is off the paint path entirely, which is what makes `no-cache`
affordable here: the service worker answers first, the network call happens behind it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A show that has published for years is unbounded: GEOlino Spezial alone is 358
episodes and 5.8 GB, and the device it syncs onto is a 30 GB SD card that also
holds the rest of the library. Nothing stopped the 6-hourly poll from eventually
filling it.
Cap each show's folder at general.podcast_episode_limit (default 50, null to
keep everything), pruning the oldest past that after each sync pass.
The same limit caps what is downloaded, and it has to be one number for both.
Prune to the newest N but keep fetching everything the feed offers, and every
poll would re-download exactly the episodes the previous one deleted - forever,
at full size, since missing_episodes() decides purely from what is on disk.
There is a test for that specific loop.
Pruning only touches files named the way this module names them
(YYYYMMDD - Title.ext), so feed.txt, folder.jpg, the failed-download record and
anything placed by hand are all left alone; a parse that fails means "not ours",
not "delete it". An episode's sidecar cover goes with it. A pass that only
deleted still reports a change, because the library needs the rescan just as
much as it does after a download.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Pearls were earned every run and spent on nothing: the aquarium fills up by
finishing worlds, not by paying for it. A counter that only ever goes up is one
more stat competing for attention on the result sheet and the home screen, and
one more field to carry through the run payload, the progress file and both test
suites.
Stars and the animal ladder already say how a run went, so nothing is lost.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Moves the typing app's lesson plan and progress from client-side YAML/localStorage
into the backend, and adds a reward system that ties passing a lesson to unlocking
part of the music library. Lock state is always recomputed live from curriculum x
progress x the live library, never persisted separately.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a TCP client for lircd's classic protocol: play/pause/next/prev/
volume/mute map to the same intents every other front-end already
emits, and number keys 0-9 play an assigned album/audiobook from the
start or a podcast show's newest episode, resolved fresh on every
press. The mapping is configured in config.yml and editable from the
frontend: a small "Taste zuweisen" button on the play screen (or the
A+digit keyboard shortcut) opens a 10-key picker to assign whatever is
currently playing.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A show folder under Kinderpodcasts/ opts in by containing a feed.txt marker
naming its RSS feed. A new PodcastFeedService polls every such feed every 6
hours (and once at startup), downloads any episode not already on disk using
the existing YYYYMMDD - Title.ext convention, and triggers the same
rescan-and-broadcast sequence "Bibliothek neu einlesen" already uses - now
shared via App.rescan_library() instead of duplicated. A show with no
feed.txt is untouched, so there is no new config section for this.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The background worker now runs a real librosa analyzer (tempo, beat grid,
per-second energy/valence curves) instead of only the null baseline, kept
behind build_analyzer() so a plain checkout without the analysis extra still
runs fine. The web player reads that per-track analysis and drives a new
animated "Ambience" background (bubbles, colour, current) that reacts to the
beat and the mood curve as the track plays, plus a debug overlay for tuning
it. Also adds a one-off script to backfill podcast cover art from iTunes.
Implements the room-control page from the design mockup: a scenes row above cards
for shutters, color lamps, and brightness-only lamps, all driven by a new
`general.ha` config section (server URL, token, ordered device/scene lists).
The backend proxies every Home Assistant call server-side (GET/POST /api/ha/...)
rather than the browser calling Home Assistant directly, so the long-lived token
never leaves the LAN device and Home Assistant's own CORS settings don't need to
know about musicmouse at all. Card kind (shutter/color/brightness-only) is
inferred at runtime from what Home Assistant reports about each entity, not
configured explicitly.
Also stops tracking python-backend/config.yml, which had drifted into the repo
despite its own header saying it shouldn't be - it now carries real credentials
locally and needs to stay untracked.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
