Stop the kiosk coming up blank after every reboot

A reboot kills Chromium rather than closing it, so it writes "exit_type":"Crashed" into
its profile. On the next boot it came up with a restore prompt and a tab stuck for ever
on a blank "Loading..." page - navigation never committed, navigator.serviceWorker was
still undefined, nothing on screen. On a device with a monitor and no keyboard that is
permanent, and the backend was healthy throughout: / answered in 5 ms and /api/library
returned 812 kB the whole time.

--disable-session-crashed-bubble hides the prompt but not the state behind it, and here
the prompt showed anyway. .xinitrc now rewrites exit_type and exited_cleanly before
launching, which is the usual remedy for a kiosk that gets powered off rather than shut
down, and adds --hide-crash-restore-bubble (the current name for the flag).

Verified by rebooting and leaving it alone: the page comes up on its own with its title
and its content.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

.ansible-lint

@@ -0,0 +1,7 @@
+---
+exclude_paths:
+  # A verbatim copy of the app repo's tippen-curriculum.yml. It is content the game
+  # reads, not ansible YAML, and reformatting it here to satisfy a line-length rule
+  # would make this copy diverge from the file it is copied from. Its schema is checked
+  # by the backend at startup, which is a stronger check than anything lint does.
+  - roles/pi_musicmouse/files/tippen-curriculum.yml

.gitignore

@@ -1,8 +1,5 @@
-ve_*
-/server/scripts/docker-images/tagspace/tagspaces
-/server/scripts/docker-images/tagspace/*.zip
 *.img
-/music
 __pycache__
-/roles/pi-squeezeserver/backup
+/roles/pi_squeezeserver/backup
+.ansible/
 venv*

README.md

@@ -0,0 +1,80 @@
+# ansible
+
+Personal Ansible setup for provisioning and maintaining a fleet of Raspberry
+Pis (audio players, sensors, music mouse, etc.) plus one home server.
+
+## Layout
+
+- `inventory.yml` — hosts and group vars (Pis under `iot`, plus `server`).
+  `group_vars/` and `host_vars/` hold vars for the `mediapis` group (the four
+  parallel audio-player Pis) and their host-specific overrides.
+- `mediapis.yml`, `working.yml`, `server.yml`, `newrpi-provisioning.yml`,
+  `octopisetup.yml` — top-level playbooks. `mediapis.yml` is the canonical
+  playbook for the `mediapis` group (`musicdolphin`, `kitchenpi`,
+  `bedroompi`, `musicmouse`); the others are narrower/ad-hoc runs kept around
+  for specific hosts or one-off tasks.
+- `roles/` — one role per piece of functionality (audio backends, sensors,
+  bluetooth monitoring, server basics, etc.). Each has a short `README.md`.
+- `update-packages.yml` — deliberate, fleet-wide package update (see
+  "Keeping packages up to date" below). `update-packages-pinned-example.yml`
+  is a template for pinning or bumping a single package outside that.
+- `lookup_plugins/keepass.py` — custom lookup plugin that fetches secrets
+  (device passwords, wifi passphrase) from a running KeePassXC instance via
+  its browser-integration protocol, instead of storing them in the repo.
+- `pis/` — loose config files/scripts used when provisioning Pis by hand.
+- `scripts/` — standalone helper scripts (Raspbian image creation, a network
+  logger) that aren't Ansible roles.
+- `archive/` — retired setups kept for reference (not actively maintained).
+
+## Setup
+
+```
+python3 -m venv venv
+source venv/bin/activate
+pip install -r requirements.txt
+```
+
+Secrets are pulled from KeePassXC at run time via the `keepass` lookup
+plugin — see the header of `lookup_plugins/keepass.py` for how to enable
+Browser Integration in KeePassXC. Freshly-flashed Raspberry Pis are reached
+first with the OS-default `pi`/`raspberry` credentials (see
+`roles/pi_standard_setup`), which the role then rotates to a KeePassXC-managed
+password.
+
+## Running a playbook
+
+```
+ansible-playbook mediapis.yml --limit <host>
+```
+
+`ansible.cfg` points Ansible at `inventory.yml` and `roles/` by default, so
+no extra flags are needed for those.
+
+## Keeping packages up to date
+
+Regular playbook runs (`mediapis.yml`, `server.yml`, etc.) use `state: present`
+for packages, so they only install what's missing — they never upgrade
+anything as a side effect of an unrelated config change. Two separate,
+deliberate mechanisms handle upgrades instead:
+
+**Security patches — automatic.** The `unattended_upgrades` role (applied
+to every host in `mediapis.yml`/`server.yml`) configures `unattended-upgrades`
+to install security-origin updates automatically, with a scheduled reboot
+window (default 03:00, see `roles/unattended_upgrades/defaults/main.yml`)
+for patches that need one. Not scoped to full dist-upgrades.
+
+**Everything else — deliberate, ad hoc.**
+```
+just update <host_or_group>          # e.g. `just update kitchenpi` or `just update`
+venv/bin/ansible-playbook update-packages.yml --limit <host> --check --diff   # dry run first
+```
+Defaults to `upgrade: safe` (upgrades in place, never installs/removes
+packages to resolve dependencies — see the comment header in
+`update-packages.yml` for the tradeoff against `dist`). There is no cron/
+schedule wired up for this yet; run it ad hoc when you want the fleet
+updated, or add a crontab entry yourself (a starting point is documented in
+`update-packages.yml`'s header).
+
+To pin a package to an exact version, or deliberately bump one named
+package to latest outside this schedule, copy the pattern in
+`update-packages-pinned-example.yml`.

ansible.cfg

@@ -0,0 +1,6 @@
+[defaults]
+inventory = inventory.yml
+roles_path = roles
+lookup_plugins = lookup_plugins
+#strategy = free
+serial = 5

full.yml

@@ -1,61 +0,0 @@
----
-
-
-#- hosts: esszimmerradio
-#  roles:
-#    - pi-standard-setup
-#    - pi-squeezelite-custom
-#    - pi-shairport
-#    - pi-lirc
-#    - pi-sispmctl
-#
-
-- hosts: musikserverwohnzimmeroben
-  roles:
-    - pi-standard-setup
-    - pi-hifiberry-amp
-    - pi-squeezelite-custom
-    - pi-shairport
-    - pi-irserver
-    #- pi-dhtsensor
-    - pi-squeezeserver
-
-- hosts: kitchenpi  
-  roles:
-    - pi-standard-setup
-    - pi-hifiberry-amp
-    - pi-squeezelite-custom
-    - pi-shairport
-    - pi-lirc
-    - pi-dhtsensor
-    - pi-disable-onboard-bluetooth
-    - bluetooth-monitor
-
-- hosts: bedroompi
-  roles:
-    - pi-standard-setup
-    - pi-squeezelite-custom
-    - pi-shairport
-    - pi-lirc
-    - pi-dhtsensor
-    - pi-disable-onboard-bluetooth
-    - bluetooth-monitor
-
-- hosts: musicmouse
-  roles:
-    - pi-standard-setup
-    - pi-hifiberry-amp
-    - pi-musicmouse
-    - pi-squeezelite-custom
-    - pi-shairport
-    - pi-lirc
-    - bluetooth-monitor
-
-#- hosts: octopi
-#  roles:
-#    - pi-dhtsensor
-    
-#- hosts: newrpi
-#  roles:
-#     - pi-standard-setup
-#     - pi-lirc

group_vars/mediapis.yml

@@ -0,0 +1,15 @@
+---
+mediapi_has_hifiberry_amp: false
+mediapi_ir_control: lirc
+mediapi_has_dhtsensor: false
+mediapi_disable_onboard_bluetooth: false
+mediapi_install_bluetooth_monitor: false
+mediapi_install_kidsmusic: false
+mediapi_has_monitor: false
+
+# No media pi runs its own Logitech Media Server. Every squeezelite in the fleet is
+# pointed at pi_squeezelite_squeezeserver (the server, 192.168.178.80) by inventory.yml,
+# so a server on a pi would have no clients. false here does not mean "skip the role" -
+# it means "actively remove it", which is how the stray one on musicdolphin goes away
+# and stays away. See roles/pi_squeezeserver/README.md.
+mediapi_has_squeezeserver: false

host_vars/bedroompi.yml

@@ -0,0 +1,13 @@
+---
+squeezelite_name: BedroomPi
+pi_shairport_name: BedroomPi
+alsa_card_name: Codec
+sensor_room_name_ascii: schlafzimmer
+sensor_room_name: Schlafzimmer
+my_bt_monitor_watchdog_seconds: 600
+my_btmonitor_restart_ble_interface: hci0
+main_user: root
+
+mediapi_has_dhtsensor: true
+mediapi_disable_onboard_bluetooth: true
+mediapi_install_bluetooth_monitor: true

host_vars/kitchenpi.yml

@@ -0,0 +1,13 @@
+---
+squeezelite_name: KitchenPi
+pi_shairport_name: KitchenPi
+alsa_card_name: 0
+sensor_room_name_ascii: kueche
+sensor_room_name: Küche
+hifiberry_overlay: hifiberry-amp
+main_user: root
+
+mediapi_has_hifiberry_amp: true
+mediapi_has_dhtsensor: true
+mediapi_disable_onboard_bluetooth: true
+mediapi_install_bluetooth_monitor: true

host_vars/musicdolphin.yml

@@ -0,0 +1,26 @@
+---
+squeezelite_name: Wohnzimmer
+pi_shairport_name: _Oben_Wohnzimmer
+alsa_card_name: sndrpihifiberry
+sensor_room_name_ascii: wohnzimmeroben
+sensor_room_name: WohnzimmerOben
+hifiberry_overlay: hifiberry-dacplus
+main_user: root
+
+mediapi_has_hifiberry_amp: true
+mediapi_ir_control: irserver
+mediapi_has_dhtsensor: true
+
+# Display-only MusicMouse instance: no physical mouse attached, shown on the monitor
+# via pi_kiosk instead. See roles/pi_musicmouse/files/config-musicdolphin.yml.
+mediapi_install_kidsmusic: true
+mediapi_has_monitor: true
+# Temporarily a debuggable desktop rather than a locked-down kiosk: Openbox root menu,
+# visible pointer, Firefox in a normal window. Set back to "kiosk" when done.
+pi_kiosk_mode: debug
+# ?pi=1 is the front-end's Raspberry Pi profile (web/src/lib/lowPower.ts): the ambient
+# canvas at a quarter of the pixels and 30fps, the progress bar re-rendering ten times
+# a second instead of sixty, and no backdrop blur. Drop the parameter in the address
+# bar to compare against the full-fat version on the same machine.
+pi_kiosk_url: "http://localhost:8080/?pi=1"
+musicmouse_version: deploy/musicdolphin

host_vars/musicmouse.yml

@@ -0,0 +1,25 @@
+---
+squeezelite_name: MusicMouse
+pi_shairport_name: MusicMouse
+alsa_card_name: sndrpihifiberry
+hifiberry_overlay: hifiberry-dacplus
+sensor_room_name: Kinderzimmer
+sensor_room_name_ascii: kinderzimmer
+main_user: root
+
+mediapi_has_hifiberry_amp: true
+mediapi_install_bluetooth_monitor: true
+# The Kinderzimmer device still runs the pre-rearchitecture backend (deploy/musicmouse
+# == b2c060f): /opt/musicmouse_venv and espmusicmouse/host_driver/main.py, installed by
+# an older version of this role. The current pi_musicmouse only knows the new
+# python-backend/ + web/ layout, so it is deliberately off here - a run would
+# force-check-out incompatible code over a device the kids use every day, and would
+# fail anyway (that commit has no python-backend/pyproject.toml, no
+# python-backend/musicmouse.service and no web/ at all).
+#
+# deploy/musicmouse stays recorded below as the rollback marker for what is actually
+# installed. Turning this back on means migrating the device at the same time: move
+# /media/musicmouse/<figure>/ into Figuren/ and switch to the new config schema -
+# files/config-musicmouse.yml is already written for that.
+mediapi_install_kidsmusic: false
+musicmouse_version: deploy/musicmouse

inventory.yml

@@ -1,63 +1,21 @@
+---
 all:
   hosts:
     server:
       ansible_host: home.bauer.tech
       ansible_port: 22187
     server2:
-      
   children:
     iot:
       hosts:
         octopi:
           sensor_room_name_ascii: prusaprinter
           sensor_room_name: prusaprinter
-          dht_pin: 26
+          pi_dhtsensor_dht_pin: 26
-          main_user: root
-        bedroompi:
-          squeezelite_name: BedroomPi
-          shairport_name: BedroomPi
-          alsa_card_name: Codec
-          sensor_room_name_ascii: schlafzimmer
-          sensor_room_name: Schlafzimmer
-          my_bt_monitor_watchdog_seconds: 600
-          my_btmonitor_restart_ble_interface: hci0
-          main_user: root
-        kitchenpi:
-          squeezelite_name: KitchenPi
-          shairport_name: KitchenPi
-          alsa_card_name: 0
-          sensor_room_name_ascii: kueche
-          sensor_room_name: Küche
-          hifiberry_overlay: hifiberry-amp
-          main_user: root
-        esszimmerradio: # oben, eltern
-          squeezelite_name: Esszimmer
-          shairport_name: _Oben_Esszimmer
-          #alsa_card_name: Device
-          squeezeserver: 192.168.178.100
-          configure_wifi: true
-          alsa_card_name: 1
-          main_user: root
-        musikserverwohnzimmeroben: # oben, eltern
-          squeezelite_name: Wohnzimmer
-          shairport_name: _Oben_Wohnzimmer
-          alsa_card_name: 0
-          squeezeserver: 192.168.178.100
-          sensor_room_name_ascii: wohnzimmeroben
-          sensor_room_name: WohnzimmerOben
-          hifiberry_overlay: hifiberry-dacplus
-          main_user: root
-        musicmouse:
-          squeezelite_name: MusicMouse
-          shairport_name: MusicMouse
-          alsa_card_name: 1
-          hifiberry_overlay: hifiberry-dacplus
-          sensor_room_name: Kinderzimmer
-          sensor_room_name_ascii: kinderzimmer
           main_user: root
         newrpi:
           squeezelite_name: MyTestRaspberry
-          shairport_name: MyTestRaspberry
+          pi_shairport_name: MyTestRaspberry
           alsa_card_name: 0
           sensor_room_name_ascii: testraum
           sensor_room_name: Test Raum
@@ -71,14 +29,23 @@ all:
         homeassistant:
           sensor_room_name: Anschlussraum
           sensor_room_name_ascii: anschlussraum
+      children:
+        mediapis:
+          hosts:
+            musicdolphin:
+            kitchenpi:
+            bedroompi:
+            musicmouse:
   vars:
     ansible_user: root
     ansible_python_interpreter: /usr/bin/python3
-    squeezeserver: 192.168.178.80
+    ansible_ssh_common_args: "-o ForwardAgent=yes"
+    pi_squeezelite_squeezeserver: 192.168.178.80
     router_ip: 192.168.178.1
     home_assistant_url: https://ha.bauer.tech
-    home_assistant_token: eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiJkM2QxYjAwYjkxZjY0MWVhYjA4YmZhMDYwYTg3YjRhNyIsImlhdCI6MTcwNDI3MDU5MSwiZXhwIjoyMDE5NjMwNTkxfQ.dzvejgEQd9hf-Yftzd7NkR5pv76GaLFczeOy-a2pa1o
+    home_assistant_token:
+      eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiJkM2QxYjAwYjkxZjY0MWVhYjA4YmZhMDYwYTg3YjRhNyIsImlhdCI6MTcwNDI3MDU5MSwiZXhwIjoyMDE5NjMwNTkxfQ.dzvejgEQd9hf-Yftzd7NkR5pv76GaLFczeOy-a2pa1o
     configure_wifi: false
-    wifi_ssid: BauerWLAN
+    pi_standard_setup_wifi_ssid: BauerWLAN
     my_btmonitor_mqtt_username: my_btmonitor
     my_btmonitor_mqtt_password: 8aBIAC14jaKKbla

justfile

@@ -0,0 +1,55 @@
+venv_bin := "venv/bin"
+
+# List available commands
+default:
+    @just --list
+
+# Create the Python virtualenv used to run ansible
+venv:
+    python3 -m venv venv
+    {{venv_bin}}/pip install --upgrade pip
+
+# Install Python deps (requirements.txt) and Galaxy collections (requirements.yml)
+install:
+    {{venv_bin}}/pip install -r requirements.txt
+    {{venv_bin}}/ansible-galaxy collection install -r requirements.yml < /dev/null
+
+# Ping all hosts, or a group/host, e.g. `just ping kitchenpi`
+ping group="all":
+    {{venv_bin}}/ansible {{group}} -m ping
+
+# Show the resolved inventory as a tree
+inventory:
+    {{venv_bin}}/ansible-inventory --graph
+
+# Syntax-check a playbook, e.g. `just syntax mediapis.yml`
+syntax playbook:
+    {{venv_bin}}/ansible-playbook {{playbook}} --syntax-check
+
+# Dry-run a playbook against a host/group without making changes
+check playbook limit="all":
+    {{venv_bin}}/ansible-playbook {{playbook}} --limit {{limit}} --check --diff
+
+# Run a playbook against a host/group, e.g. `just run mediapis.yml kitchenpi`
+run playbook limit="all":
+    {{venv_bin}}/ansible-playbook {{playbook}} --limit {{limit}}
+
+# Run mediapis.yml (pi roles) against one host/group, e.g. `just mediapis kitchenpi`
+mediapis limit="all":
+    just run mediapis.yml {{limit}}
+
+# Run server.yml against the server host
+server:
+    just run server.yml server
+
+# Run the deliberate fleet package-update playbook, e.g. `just update kitchenpi`
+update limit="all":
+    just run update-packages.yml {{limit}}
+
+# List installed Galaxy collections
+collections:
+    {{venv_bin}}/ansible-galaxy collection list
+
+# Lint playbooks and roles
+lint:
+    {{venv_bin}}/ansible-lint

lookup_plugins/keepass.py

@@ -1,63 +1,191 @@
-# Copy this to ".ansible/plugins/lookup"
+# Copy this file to ~/.ansible/plugins/lookup/keepass.py
+#
+# Prerequisites:
+#   pip install keepassxc-proxy-client
+#
+# KeePassXC setup:
+#   Tools > Settings > Browser Integration > Enable browser integration
+#   The plugin will prompt you to approve the association in KeePassXC on first run.
+#   Association credentials are saved to ~/.keepassxc_ansible_assoc (override with
+#   env var KEEPASSXC_ASSOC_FILE).
+#
+# Usage:
+#   {{ lookup('keepass', 'https://example.com', 'password') }}
+#   {{ lookup('keepass', 'https://example.com', 'username') }}
+#   {{ lookup('keepass', 'https://example.com') }}          # defaults to password
+#
+# Terms:
+#   terms[0]  URL (or title) to search for — matched against KeePassXC entries
+#   terms[1]  Attribute to return: username / user / password / pass / passwd
+#             Defaults to 'password' if omitted.
+
+from __future__ import absolute_import, division, print_function
+__metaclass__ = type
+
+import json
+import os
+
 from ansible.errors import AnsibleError
 from ansible.plugins.lookup import LookupBase
-from keepasshttplib import keepasshttplib, encrypter
-import requests
 
-DOCUMENTATION = """
+DOCUMENTATION = r"""
     lookup: keepass
-    author: Martin Bauer <bauer_martin@gmx.de>
+    short_description: Fetch credentials from KeePassXC via the browser proxy protocol
-    version_added: '0.2'
-    short_description: fetch data from KeePass over KeePassHTTP
     description:
-        - This lookup returns a username or password queried by the URL of the keepass entry 
+        - Connects to a running KeePassXC instance over its browser-integration Unix socket
+          (or Windows named pipe) and retrieves credentials for a given URL.
+        - On first use the plugin associates itself with KeePassXC; you will see an
+          approval dialog in KeePassXC. The association is saved to disk so subsequent
+          runs are silent.
     options:
       _terms:
         description:
-          - first is the URL to search for
+          - First term is the URL (or entry title URL) to look up.
-          - second is a property name of the entry, e.g. username or password
+          - Second term (optional) is the attribute to return.
-        required: True
+            Accepted values are username, user, password, pass, passwd.
+            Defaults to password.
+        required: true
     notes:
-      - https://github.com/viczem/ansible-keepass
+      - KeePassXC must be running with Browser Integration enabled.
-    
+      - Requires the Python package keepassxc-proxy-client.
-    example:
-      - "{{ lookup('keepass', 'urlOfEntry', 'password') }}"
 """
 
+EXAMPLES = r"""
+- name: Get password for an entry
+  debug:
+    msg: "{{ lookup('keepass', 'https://example.com') }}"
+
+- name: Get username for an entry
+  debug:
+    msg: "{{ lookup('keepass', 'https://example.com', 'username') }}"
+
+- name: Set pi account password from KeePassXC
+  user:
+    name: pi
+    password: "{{ lookup('keepass', 'default_rpi_password') | password_hash('sha512') }}"
+"""
+
+ASSOC_FILE_ENV = "KEEPASSXC_ASSOC_FILE"
+ASSOC_FILE_DEFAULT = os.path.expanduser("~/.keepassxc_ansible_assoc")
+ASSOC_NAME = "ansible-keepassxc"
+
+USERNAME_ATTRS = {"username", "user"}
+PASSWORD_ATTRS = {"password", "pass", "passwd"}
+
+
+def _get_assoc_file():
+    return os.environ.get(ASSOC_FILE_ENV, ASSOC_FILE_DEFAULT)
+
+
+def _load_assoc(connection):
+    """Load a previously saved association from disk into *connection*. Returns True on success."""
+    path = _get_assoc_file()
+    if not os.path.exists(path):
+        return False
+    try:
+        with open(path, "r") as fh:
+            data = json.load(fh)
+        connection.load_associate(data["name"], bytes(data["public_key"]))
+        return True
+    except (KeyError, ValueError, OSError):
+        return False
+
+
+def _save_assoc(connection):
+    """Persist the current association to disk."""
+    path = _get_assoc_file()
+    assoc_id, public_key = connection.dump_associate()
+    data = {"name": assoc_id, "public_key": list(public_key)}
+    with open(path, "w") as fh:
+        json.dump(data, fh)
+    os.chmod(path, 0o600)
+
+
+def _connect():
+    """Return an authenticated, test-verified Connection to KeePassXC."""
+    try:
+        from keepassxc_proxy_client.protocol import Connection, ResponseUnsuccesfulException
+    except ImportError:
+        raise AnsibleError(
+            "keepassxc-proxy-client is not installed. "
+            "Run: pip install keepassxc-proxy-client"
+        )
+
+    conn = Connection()
+
+    try:
+        conn.connect()
+    except Exception as exc:
+        raise AnsibleError(
+            "Cannot connect to KeePassXC. Is it running with Browser Integration enabled? "
+            "Error: {}".format(exc)
+        )
+
+    conn.change_public_keys()
+
+    # Try to reuse an existing association
+    if _load_assoc(conn):
+        try:
+            conn.test_associate(trigger_unlock=True)
+            return conn  # existing association is still valid
+        except Exception:
+            pass  # fall through and re-associate
+
+    # First run (or stale association) — ask KeePassXC to authorise us
+    try:
+        conn.associate()
+    except Exception as exc:
+        raise AnsibleError(
+            "KeePassXC association failed. "
+            "Please approve the request in the KeePassXC dialog. "
+            "Error: {}".format(exc)
+        )
+
+    try:
+        conn.test_associate(trigger_unlock=True)
+    except Exception as exc:
+        raise AnsibleError("KeePassXC association test failed: {}".format(exc))
+
+    _save_assoc(conn)
+    return conn
+
 
 class LookupModule(LookupBase):
 
-    def __init__(self, *args, **kwargs):
-        super(LookupModule, self).__init__(*args, **kwargs)
-        self.k = keepasshttplib.Keepasshttplib()
-    
     def run(self, terms, variables=None, **kwargs):
         if not terms or len(terms) > 2:
-            raise AnsibleError('Keepass wrong request format')
+            raise AnsibleError(
-        if len(terms) == 1:
+                "keepass lookup expects 1 or 2 arguments: "
-            entry_path, entry_attr = terms[0], 'password'
+                "lookup('keepass', '<url>', '<attribute>')"
+            )
+
+        url = terms[0]
+        attr = terms[1].lower() if len(terms) == 2 else "password"
+
+        if attr not in USERNAME_ATTRS | PASSWORD_ATTRS:
+            raise AnsibleError(
+                "keepass: unsupported attribute '{}'. "
+                "Use one of: username, user, password, pass, passwd".format(attr)
+            )
+
+        conn = _connect()
+
+        try:
+            entries = conn.get_logins(url)
+        except Exception as exc:
+            raise AnsibleError(
+                "keepass: failed to retrieve logins for '{}': {}".format(url, exc)
+            )
+
+        if not entries:
+            raise AnsibleError(
+                "keepass: no entries found in KeePassXC for URL '{}'".format(url)
+            )
+
+        # Return the first matching entry (KeePassXC already filters by URL)
+        entry = entries[0]
+
+        if attr in USERNAME_ATTRS:
+            return [entry.get("login", "")]
         else:
-            entry_path, entry_attr = terms[0], terms[1]
+            return [entry.get("password", "")]
-        
-        #if not self._test_connection():
-        #    raise AnsibleError('Keepass is closed!')
-        try:
-            auth = self.k.get_credentials(entry_path)
-        except Exception as e:
-            raise AnsibleError('Keepass error obtaining entry {}: {}'.format(entry_path, e))
-        if auth:
-            if entry_attr not in ('username', 'user', 'pass', 'passwd', 'password'):
-                raise AnsibleError("Keepass wrong entry")
-            
-            ret = auth[0] if entry_attr.startswith('user') else auth[1]
-            return [ret]
-
-    def _test_connection(self):
-        key = self.k.get_key_from_keyring()
-        if key is None:
-            key = encrypter.generate_key()
-        id_ = self.k.get_id_from_keyring()
-        try:
-            return self.k.test_associate(key, id_)
-        except requests.exceptions.ConnectionError as e:
-            raise AnsibleError('Keepass Connection Error: {}'.format(e))    

mediapis.yml

@@ -0,0 +1,28 @@
+---
+- name: Media Pis (squeezelite/shairport audio players)
+  hosts: mediapis
+  roles:
+    - unattended_upgrades
+    - pi_modern_shell_env
+    - pi_standard_setup
+    - role: pi_hifiberry_amp
+      when: mediapi_has_hifiberry_amp
+    - role: pi_musicmouse
+      when: mediapi_install_kidsmusic
+    - role: pi_kiosk
+      when: mediapi_has_monitor
+    - pi_squeezelite_custom
+    - role: pi_squeezeserver
+      vars:
+        pi_squeezeserver_state: "{{ 'present' if mediapi_has_squeezeserver else 'absent' }}"
+    - pi_shairport
+    - role: pi_irserver
+      when: mediapi_ir_control == 'irserver'
+    - role: pi_lirc
+      when: mediapi_ir_control == 'lirc'
+    - role: pi_dhtsensor
+      when: mediapi_has_dhtsensor
+    - role: pi_disable_onboard_bluetooth
+      when: mediapi_disable_onboard_bluetooth
+    - role: bluetooth_monitor
+      when: mediapi_install_bluetooth_monitor

newrpi-provisioning.yml

@@ -1,8 +1,9 @@
 ---
-- hosts: musicmouse
+- name: Musicmouse
+  hosts: musicmouse
   roles:
-    - pi-standard-setup
+    - pi_standard_setup
-    - pi-hifiberry-amp
+    - pi_hifiberry_amp
-    - pi-squeezelite
+    - pi_squeezelite
-    - pi-shairport
+    - pi_shairport
-    - pi-lirc
+    - pi_lirc

octopisetup.yml

@@ -1,3 +1,5 @@
-- hosts: octopi
+---
+- name: Octopi
+  hosts: octopi
   roles:
-    - pi-dhtsensor
+    - pi_dhtsensor

pis/debmatic-install.yml

@@ -1,18 +1,19 @@
 ---
-
+- name: Install Debmatic
-- hosts: kitchenpi
+  hosts: kitchenpi
   tasks:
     - name: Add Key for Debmatic Repository
-      apt_key:
+      ansible.builtin.apt_key:
         url: https://www.debmatic.de/debmatic/public.key
         state: present
     - name: Add Debmatic Repository
-      repo: deb https://www.debmatic.de/debmatic stable main
+      ansible.builtin.apt_repository:
-      state: present
+        repo: deb https://www.debmatic.de/debmatic stable main
-      filename: debmatic
+        state: present
+        filename: debmatic
     - name: Install Pre-requesites
-      apt:
+      ansible.builtin.apt:
-        update_cache: yes
+        update_cache: true
         name:
           - build-essential
           - bison
@@ -21,8 +22,8 @@
           - raspberrypi-kernel-headers
           - pivccu-modules-dkms
     - name: Reboot
-      reboot:
+      ansible.builtin.reboot:
     - name: Install Debmatic package
-      apt:
+      ansible.builtin.apt:
-        update_cache: no
+        update_cache: false
         name: debmatic

requirements.txt

@@ -0,0 +1,7 @@
+# Python dependencies for the Ansible *control node* (the machine running
+# ansible-playbook). Dependencies needed only on managed hosts (Pis/server)
+# are installed by the relevant roles themselves via apt/pip tasks.
+ansible-core>=2.14
+ansible-lint
+keepassxc-proxy-client
+passlib

requirements.yml

@@ -0,0 +1,4 @@
+---
+collections:
+  - name: ansible.posix
+  - name: community.general

roles/better-shell-env/tasks/files/dot.fish

@@ -1,3 +0,0 @@
-function dot -w git -d "Manages dotfiles"
-    git --git-dir=$HOME/.dot --work-tree=$HOME $argv
-end

roles/better-shell-env/tasks/main.yml

@@ -1,47 +0,0 @@
----
-# 
-- name: Install packages
-  apt:
-    name:
-      - bat
-      - broot
-      - duf
-      - fd-find
-      - fish
-      - fzf
-      - git
-      - glances
-      - lsd
-      - neovim
-      - ripgrep
-      - tmux
-      - zoxide
-
-# TODO: Dust, btm
-
-block:
-  become: true
-  become_user: {{main_user}}
-  - name: Create bin folder
-    ansible.builtin.file:
-      path: ~/bin
-      state: directory
-      mode: '0755'
-
-  # Oh-my-fish
-  - name: get oh-my-fish repo
-    git:
-      repo: 'https://github.com/oh-my-fish/oh-my-fish.git'
-      dest: ~/.local/share/git/oh-my-fish
-  - name: install oh-my-fish
-    shell:
-      cmd: "bin/install --offline --noninteractive"
-      executable: /usr/bin/fish
-      chdir: ~/.local/share/git/oh-my-fish
-    creates:
-      - ~/.local/share/omf
-      - ~/.config/omf
-  - copy:
-      content: "bobthefish"
-      dst: "~/.config/omf/theme"
-

roles/bluetooth-monitor/tasks/main.yml

@@ -1,22 +0,0 @@
-- name: Apt install bluez, firmware and Python requirements
-  apt:
-    name: 
-      - bluez
-      - bluez-firmware
-      - firmware-realtek
-      - firmware-realtek-rtl8723cs-bt
-      - python3-pycryptodome
-      - python3-bleak
-      - python3-asyncio-mqtt
-      - python3-numpy
-- name: Copy monitor script
-  template: src=my_btmonitor.py dest=/usr/bin/my_btmonitor owner=root mode=u+rwx
-- name: Install systemd service file
-  copy: src=my_btmonitor.service dest=/etc/systemd/system/
-- name: Add script to autostart and start now
-  systemd: name=my_btmonitor state=restarted enabled=yes daemon_reload=yes
-#- name: Add to sysdweb
-#  include_role:
-#    name: pi-sysdweb
-#  vars:
-#    sysdweb_name: my_btmonitor  

roles/bluetooth_monitor/README.md

@@ -0,0 +1,12 @@
+# bluetooth_monitor
+
+Installs `my_btmonitor.py` (BLE scanning via `bleak`) as a systemd service
+that watches for nearby devices, publishes state over MQTT, and can restart
+the local BLE interface on a watchdog timeout.
+
+**Key vars:** `my_bt_monitor_watchdog_seconds`, `my_btmonitor_restart_ble_interface`,
+`my_btmonitor_mqtt_username`, `my_btmonitor_mqtt_password`
+
+`other/` is not part of the deployed role — it's a separate, standalone
+data-analysis project (Jupyter notebook, Dockerfile, collected CSV data) used
+to analyze data captured by the monitor.

roles/bluetooth_monitor/handlers/main.yml

@@ -0,0 +1,5 @@
+---
+- name: Restart my_btmonitor
+  ansible.builtin.service:
+    name: my_btmonitor
+    state: restarted

roles/bluetooth_monitor/tasks/main.yml

@@ -0,0 +1,36 @@
+---
+- name: Apt install bluez, firmware and Python requirements
+  ansible.builtin.apt:
+    name:
+      - bluez
+      - bluez-firmware
+      - firmware-realtek
+      - firmware-realtek-rtl8723cs-bt
+      - python3-pycryptodome
+      - python3-bleak
+      - python3-asyncio-mqtt
+      - python3-numpy
+- name: Copy monitor script
+  ansible.builtin.template:
+    src: my_btmonitor.py
+    dest: /usr/bin/my_btmonitor
+    owner: root
+    mode: u+rwx
+  notify: Restart my_btmonitor
+- name: Install systemd service file
+  ansible.builtin.copy:
+    src: my_btmonitor.service
+    dest: /etc/systemd/system/
+    mode: "0644"
+  notify: Restart my_btmonitor
+- name: Add script to autostart and start now
+  ansible.builtin.systemd:
+    name: my_btmonitor
+    state: started
+    enabled: "yes"
+    daemon_reload: "yes"
+# - name: Add to sysdweb
+#   include_role:
+#     name: pi_sysdweb
+#   vars:
+#     pi_sysdweb_name: my_btmonitor

roles/bluetooth_monitor/templates/my_btmonitor.py

@@ -10,6 +10,7 @@ import json
 from datetime import datetime
 import os
 import time
+import subprocess
 
 # ------------------- Config ----------------------------------------------------------------
 
@@ -78,6 +79,12 @@ async def ble_scan():
               await stop_event.wait()
       except Exception as e:
         print("Error", e)              
+        try:
+            subprocess.run(["hciconfig", "hci0", "reset"], check=True)
+        except Exception as reset_err:
+            print(f"Reset failed: {reset_err}")
+        await asyncio.sleep(3)
+
         print("Starting again")
 
 

roles/pi-alsasetup/tasks/main.yml

@@ -1,3 +0,0 @@
----
-- name: Sync alsa config
-  template: src=asound.conf dest=/etc/asound.conf

roles/pi-dhtsensor-circuitpython/defaults/main.yml

@@ -1,3 +0,0 @@
----
-dht_pin: "D12"
-dht_polling_sleep_time_seconds: 20

roles/pi-dhtsensor-circuitpython/tasks/main.yml

@@ -1,20 +0,0 @@
----
-- name: apt install libgpiod2
-  apt: name=libgpiod2 cache_valid_time=7200 state=present
-- name: pip install adafruit-circuitpython-dht
-  pip:
-    name: adafruit-circuitpython-dht
-    executable: pip3
-- name: Install script config
-  template: src=dht22_sensing.json dest=/etc/dht22_sensing.json
-- name: Install script
-  copy: src=dht22_sensing.py dest=/usr/bin/dht22_sensing owner=root mode=u+rwx
-- name: Install systemd service file
-  copy: src=dht22_sensing.service dest=/lib/systemd/system/
-- name: Add script to autostart and start now
-  systemd: name=dht22_sensing state=started enabled=yes daemon_reload=yes
-- name: Add to sysdweb
-  include_role:
-    name: pi-sysdweb
-  vars:
-    sysdweb_name: dht22_sensing

roles/pi-dhtsensor/defaults/main.yml

@@ -1,3 +0,0 @@
----
-dht_pin: 12
-dht_polling_sleep_time_seconds: 20

roles/pi-dhtsensor/tasks/main.yml

@@ -1,31 +0,0 @@
----
-# Use the deprecated version here instead, not the new circuitpython adafruit-circuitpython-dht version
-# the new version needs a lot of CPU time and doesn't work correctly on old raspi 1
-# a copy of the deprecated repo is downloaded as zip (if it goes away)
-
-- name: Uninstall libgpiod2 (circuitpython) if present
-  apt: name=libgpiod2 cache_valid_time=7200 state=absent
-- name: pip uninstall adafruit-circuitpython-dht
-  pip:
-    name: adafruit-circuitpython-dht
-    executable: pip3
-    state: absent  
-    extra_args: "--break-system-packages"
-- name: pip install adafruit-dht
-  pip:
-    name: adafruit-dht
-    executable: pip3
-    extra_args: "--break-system-packages"
-- name: Install script config
-  template: src=dht22_sensing.json dest=/etc/dht22_sensing.json
-- name: Install script
-  copy: src=dht22_sensing.py dest=/usr/bin/dht22_sensing owner=root mode=u+rwx
-- name: Install systemd service file
-  copy: src=dht22_sensing.service dest=/etc/systemd/system/
-- name: Add script to autostart and start now
-  systemd: name=dht22_sensing state=restarted enabled=yes daemon_reload=yes
-- name: Add to sysdweb
-  include_role:
-    name: pi-sysdweb
-  vars:
-    sysdweb_name: dht22_sensing

roles/pi-disable-onboard-bluetooth/handlers/main.yml

@@ -1,4 +0,0 @@
----
-- name: reboot
-  reboot:
-

roles/pi-hifiberry-amp/handlers/main.yml

@@ -1,4 +0,0 @@
----
-- name: reboot
-  reboot:
-

roles/pi-hifiberry-amp/meta/main.yml

@@ -1,3 +0,0 @@
----
-dependencies:
-  - role: pi-alsasetup

roles/pi-irserver/tasks/main.yml

@@ -1,16 +0,0 @@
----
-- name: Copy irserver
-  copy: src=irserver dest=/usr/bin/irserver mode=u+rx
-- name: Make config dir for remotes
-  file: path=/usr/bin/remotes state=directory
-- name: Copy hauppauge remote
-  copy: src=hauppauge.rem dest=/usr/bin/remotes/
-- name: Copy irserver systemd file
-  copy: src=irserver.service dest=/lib/systemd/system/
-- name: Enable irserver autostart
-  systemd: name=irserver state=restarted enabled=yes daemon_reload=yes
-- name: Add irserver to sysdweb
-  include_role:
-    name: pi-sysdweb
-  vars:
-    sysdweb_name: irserver

roles/pi-lirc/tasks/main.yml

@@ -1,26 +0,0 @@
----
-- name: Install lirc
-  apt:
-    name: lirc
-- name: Install config file lirc_options.conf
-  copy: src=lirc_options.conf dest=/etc/lirc/lirc_options.conf
-- name: Install config file lircd.conf
-  copy: src=lircd.conf dest=/etc/lirc/lircd.conf
-- name: Install remote file
-  copy: src=hauppauge.conf dest=/etc/lirc/hauppauge.conf
-- name: Activate overlay in boot config
-  lineinfile:
-    path: /boot/firmware/config.txt
-    regexp: "^#?dtoverlay=gpio-ir"
-    line: "dtoverlay=gpio-ir,gpio_pin=17"
-  register: boot_overlay
-- name: Restart lircd
-  systemd: name=lircd state=started enabled=yes daemon_reload=yes
-- name: Reboot if boot overlay changed
-  reboot:
-  when: boot_overlay.changed
-- name: Add to sysdweb
-  include_role:
-    name: pi-sysdweb
-  vars:
-    sysdweb_name: lircd

roles/pi-musicmouse/files/config.yml

@@ -1,40 +0,0 @@
-general:
-  alsa_device: softvol_effects
-  mqtt:
-    user: musicmouse
-    password: KNLEFLZF94yA6Zhj141
-    server: homeassistant 
-  hass_url: https://ha.bauer.tech
-  hass_token: "eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiI4N2ExMzM2ZmQ4ZWQ0ZDgzOWZhMjU3NmZjYTg1NWQ1ZiIsImlhdCI6MTcwNDAyOTUyOSwiZXhwIjoyMDE5Mzg5NTI5fQ.vx9L5bTSey98uc8TwodShaEXSMr-hjXugPsNviR_fEw" 
-  button_leds_brightness: 0.5
-  volume_increment: 5
-  min_volume: 23
-  max_volume: 70
-  serial_port: "/dev/ttyUSB0"
-
-figures:
-  elefant:       
-    id: "88041174e9"
-    colors: ["#ffff00", "#00c8ff", "#094b46", "#c20099"]
-  fuchs: 
-     id: "8804ce7230"
-     colors: ["#F4D35E", "#F95738", "#F95738", "#083d77"]
-  eule:          
-      id: "88040d71f0"
-      colors: ["#e5a200", "#f8e300", "w33", "w99"]
-  omnom:         
-      id: "88043c6ede"
-      colors: ["#005102", "#fec800", "#005102", "#3bc405"]
-  eichhoernchen:
-      id: "88040b78ff"
-      colors: ["#ff0ada", "#4BC6B9", "#69045a", "#4BC6B9"] 
-  hund:          
-      id: "8804bc7444"
-      colors: ["#ffff00", "#00c8ff", "#094b46", "#c20099"]
-  hase:
-      id: "88044670ba"
-      colors: ["#ffff00", "#00c8ff", "#094b46", "#c20099"]
-  schneemann:
-      id: "88043f71c2"
-      colors: ["#ff0ada", "#4BC6B9", "#69045a", "#4BC6B9"] 
-

roles/pi-musicmouse/files/musicmouse.service

@@ -1,11 +0,0 @@
-[Unit]
-Description=MusicMouse Player
-After=network.target
-
-[Service]
-Type=simple
-Restart=always
-ExecStart=/opt/musicmouse_venv/bin/python /opt/musicmouse/espmusicmouse/host_driver/main.py /media/musicmouse/
-
-[Install]
-WantedBy=multi-user.target

roles/pi-musicmouse/tasks/main.yml

@@ -1,38 +0,0 @@
----
-- name: Packages
-  apt:
-    name: 
-      - python3
-      - python3-pip
-      - python3-vlc # also in venv - but this installs vlc + deps
-      - samba
-- name: Checkout Musicmouse repo
-  ansible.builtin.git:
-    repo: 'ssh://git@git.bauer.tech:2222/martin/musicmouse.git'
-    dest: '/opt/musicmouse'
-    version: 'release/1.1'
-    accept_hostkey: true
-- name: Create and update virtual env
-  ansible.builtin.pip:
-    requirements: /opt/musicmouse/espmusicmouse/host_driver/requirements.txt
-    virtualenv: /opt/musicmouse_venv
-    virtualenv_command: "/usr/bin/python3 -m venv"
-- name: Create media directory
-  file:
-    path: /media/musicmouse
-    state: directory
-- name: Install config file
-  copy: src=config.yml dest=/media/musicmouse/config.yml
-- name: Install systemd service file
-  copy: src=musicmouse.service dest=/etc/systemd/system/
-- name: Add script to autostart and start now
-  systemd: name=musicmouse state=restarted enabled=yes daemon_reload=yes
-- name: Samba setup
-  copy: src=smb.conf dest=/etc/samba/
-- name: Restart samba
-  systemd: name=smbd state=restarted enabled=yes 
-# manual steps: 
-#    - set samba passwords with smbpasswd
-#    - copy music into /media/musicmouse (or via samba share)
-#    - upload host driver?
-#    - manual patching of hassclient necessary :( loop has to be passed in, to not use running_event_loop

roles/pi-shairport/defaults/main.yml

@@ -1,3 +0,0 @@
----
-shairport_sync_version: "3.3.5"
-shairport_name: Unnamed Raspberry with shairport

roles/pi-shairport/meta/main.yml

@@ -1,3 +0,0 @@
----
-dependencies:
-  - role: pi-alsasetup

roles/pi-sispmctl/tasks/main.yml

@@ -1,21 +0,0 @@
----
-- name: Check if sispmctl already exists
-  stat: path=/usr/bin/sispmctl
-  register: sispmctl_file
-- name: Install dependencies
-  apt: name="libusb-dev" cache_valid_time=7200 state=present
-- name: Copy sispmctl sources
-  unarchive: src=sispmctl-4.7.tar.gz dest=/tmp
-  when: sispmctl_file.stat.exists == false
-- name: Build and install
-  shell: cd /tmp/sispmctl*/ && ./configure --prefix=/usr && make install
-  when: sispmctl_file.stat.exists == false
-- name: Install systemd service file
-  copy: src=sispmctl.service dest=/lib/systemd/system/
-- name: Add script to autostart and start now
-  systemd: name=sispmctl state=started enabled=yes daemon_reload=yes
-- name: Add to sysdweb
-  include_role:
-    name: pi-sysdweb
-  vars:
-    sysdweb_name: sispmctl

roles/pi-squeezelite-custom/tasks/main.yml

@@ -1,31 +0,0 @@
----
-- name: Uninstall system package of squeezelite
-  apt: name=squeezelite state=absent
-- name: Install dependencies
-  apt:
-    name:
-      - libmad0
-      - libmpg123-0
-      - libflac12
-      - libvorbisfile3
-      - libfaad2
-      # for building libssl-dev, libasound2-dev, libflac-dev, libvorbis-dev, libsoxr-dev, libfaad-dev, libmad0-dev, libmpg123-dev
-    state: present
-    cache_valid_time: 7200
-- name: Remove old config file if present
-  file: path=/etc/default/squeezelite state=absent
-- name: Copy over custom compile version of squeezelite
-  copy: src=squeezelite dest=/opt/squeezelite mode=700
-- name: Install systemd service file
-  template: src=squeezelite.service dest=/lib/systemd/system/
-- name: Enable sysdweb autostart
-  systemd: name=squeezelite state=restarted enabled=yes daemon_reload=yes
-- name: Add to sysdweb
-  include_role:
-    name: pi-sysdweb
-  vars:
-    sysdweb_name: squeezelite
-
-
-# build with adapted Makefile.rpi:
-#OPTS = -DRESAMPLE -DDSD -DUSE_SSL -DLINKALL -I./include -I./include/opus -I./include/alac -I/usr/local/include -s -mfpu=vfp -mfloat-abi=hard -march=armv6zk -mtune=arm1176jzf-s

roles/pi-squeezelite/defaults/main.yml

@@ -1,2 +0,0 @@
----
-squeezeserver: 192.168.178.80

roles/pi-squeezelite/handlers/main.yml

@@ -1,3 +0,0 @@
----
-- name: restart-squeezelite
-  systemd: name=squeezelite state=restarted enabled=yes daemon_reload=yes

roles/pi-squeezelite/meta/main.yml

@@ -1,3 +0,0 @@
----
-dependencies:
-  - role: pi-alsasetup

roles/pi-squeezelite/tasks/main.yml

@@ -1,13 +0,0 @@
----
-- name: Apt install squeezelite package
-  apt: name=squeezelite cache_valid_time=7200 state=present
-  notify: restart-squeezelite
-- name: Install config file
-  template: src=squeezelite.cfg dest=/etc/default/squeezelite
-  notify: restart-squeezelite
-- name: Add to sysdweb
-  include_role:
-    name: pi-sysdweb
-  vars:
-    sysdweb_name: squeezelite
-    

roles/pi-standard-setup/defaults/main.yml

@@ -1,13 +0,0 @@
----
-wifi_ssid:    ""      # put SSID here to configure wifi
-ansible_user: "root"  # "User to connect with, put in 'pi' here if you connect the first time, else leave empty"
-new_hostname: ""      # set this to change the hostname
-
-
-timezone:                "Europe/Berlin"
-wifi_country:            "DE"
-wifi_pass_url:           "bauer_wifi"  # has to be in keepass with url "wifi_pass_url"
-ansible_ssh_pass:        "raspberry"
-ansible_become_password: "raspberry"
-ansible_become:          yes
-

roles/pi-standard-setup/files/motd/esszimmerradio

@@ -1,12 +0,0 @@
-  EsszimmerRadio Eltern
-  
-       ________
-      /______  |
-     |       | |      _
-     | ===== | |     | |
-     | ===== | |    o o
-     |       | |         |~
-     |  .-.  | |       o    o o
-     | ' . ' | |   |~       |_|
-  ..'| '._.' | |  o
-.'   |_______|/ 

roles/pi-standard-setup/files/motd/musikserverwohnzimmeroben

@@ -1,10 +0,0 @@
- 
- Musik Server Wohnzimmer oben
-
-      |~~~~~~~~~~~~~~~|
-      |~~~~~~~~~~~~~~~|
-      |               |
-  /~~\|           /~~\|
-  \__/            \__/
-
-  

roles/pi-standard-setup/files/raspi-leds-off.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-echo none > /sys/class/leds/led0/trigger
-echo none > /sys/class/leds/led1/trigger
-
-echo 0 >/sys/class/leds/led0/brightness
-echo 0 >/sys/class/leds/led1/brightness

roles/pi-standard-setup/handlers/main.yml

@@ -1,8 +0,0 @@
----
-- name: restart sshd
-  service:
-    name: sshd
-    state: restarted
-- name: reboot
-  reboot:
-

roles/pi-standard-setup/tasks/main.yml

@@ -1,102 +0,0 @@
----
-- name: Do apt update/upgrade
-  apt: upgrade=yes update_cache=yes cache_valid_time=7200
-- name: Detect Raspi Model
-  slurp: src=/sys/firmware/devicetree/base/model
-  register: raspberry_model
-- name: Show Raspi Model
-  debug: msg={{ raspberry_model.content | b64decode }}
-- name: Add authorized SSH key to root account
-  authorized_key:
-    user: root
-    key: "{{ lookup('file', 'sshkey.pub') }}"
-    state: present
-- name: Activate root login with key
-  lineinfile:
-    path: /etc/ssh/sshd_config
-    regexp: "^#?PermitRootLogin"
-    line: "PermitRootLogin prohibit-password"
-  notify: restart sshd
-- name: Deactive SSH accepting locale vars (leads to warnings)
-  lineinfile:
-    path: /etc/ssh/sshd_config
-    regexp: "^#?AcceptEnv LANG LC_*"
-    line: "#AcceptEnv LANG LC_*"
-  notify: restart sshd
-- name: Get hostname
-  command: "raspi-config nonint get_hostname"
-  register: pi_hostname
-  changed_when: False
-- name: Change hostname  {{ new_hostname }}
-  command: "raspi-config nonint do_hostname {{ new_hostname }}"
-  when: new_hostname | bool and pi_hostname.stdout != new_hostname
-  register: set_hostname
-  notify: reboot
-- name: Get hostname
-  command: "raspi-config nonint get_hostname"
-  register: pi_hostname
-  changed_when: False
-- name: set boot mode to CLI
-  command: "raspi-config nonint do_boot_behaviour B1"
-#I2 Change Timezone
-- name: Change timezone
-  command: "raspi-config nonint do_change_timezone {{ timezone }}"
-- name: Change locale
-  command: "raspi-config nonint do_change_locale en_US.UTF-8"
-- name: Change password of default pi account
-  user:
-    name: pi
-    update_password: always
-    password: "{{ lookup('keepass', 'default_rpi_password') | password_hash('sha512')  }}"
-- name: Install Packages (vim, git, basic python stuff)
-  apt:
-    name:
-      - vim
-      - git
-      - python3
-      - python3-pip
-      - python3-wheel
-      - telnet
-    cache_valid_time: 7200
-    state: present
-- name: Copy vim config
-  copy: src=vimrc dest=/root/.vimrc
-- name: Copy git config
-  copy: src=gitconfig dest=/root/.gitconfig
-# Wifi
-- name: Get WiFi country
-  command: "raspi-config nonint get_wifi_country"
-  register: wifi_country
-  changed_when: False
-  ignore_errors: yes #to avoid error when WiFi is not present
-- name: Change WiFi country
-  command: "raspi-config nonint do_wifi_country {{ wifi_country }}"
-  when: configure_wifi
-- name: Set WiFi credentials
-  command: "raspi-config nonint do_wifi_ssid_passphrase {{ wifi_ssid }} {{ lookup('keepass', 'bauer_wifi') }}"
-  when: configure_wifi
-- name: Install watchdog
-  apt: name=watchdog cache_valid_time=7200 state=present
-  when: not wifi_ssid is defined 
-- name: Configure watchdog
-  blockinfile:
-    path: /etc/watchdog.conf
-    block: |
-      interface = wlan0
-      retry-timeout = 90
-      ping = {{router_ip}}
-      interval = 15
-  when: configure_wifi
-- name: Start watchdog
-  systemd: name=watchdog state=started enabled=yes daemon_reload=yes   # state=restarted not working, also not manually
-  when: configure_wifi
-# Message of the day
-- name: Set Message of the day
-  copy: src=motd/{{ pi_hostname.stdout }} dest=/etc/motd
-# LED off script
-- name: Copy led off script
-  copy: src=raspi-leds-off.sh dest=/usr/sbin/raspi-leds-off.sh mode="u+rwx"
-- name: Copy led off service
-  copy: src=raspi-leds-off.service dest=/lib/systemd/system/
-- name: Activate led off servic
-  systemd: name=raspi-leds-off state=restarted enabled=yes daemon_reload=yes

roles/pi-sysdweb/tasks/main.yml

@@ -1,39 +0,0 @@
----
-
-- name: Apt install python3-pip
-  apt: 
-    name: python3-pip 
-    cache_valid_time: 7200
-    state: present
-- name: Install sysdweb
-  pip:
-    name: sysdweb
-    executable: pip3
-    extra_args: "--break-system-packages"
-- name: sysdweb user
-  user:
-    name: sysdweb
-    shell: /usr/bin/nologin
-    password: "$6$TcTD23xOXln$RxN3Kd0vJRaxffoyKqjoBJM0Q5Va6REBVZ6BOgmGXs3fTAWc7voSW5QcN35t9pfro2do0LeSaeGsrMLbArZ.2."
-    update_password: always
-- name: Configure sysdweb user
-  blockinfile:
-    path: /etc/sysdweb.conf
-    create: true
-    marker: "# {mark} ansible user"
-    block : |
-      [DEFAULT]
-      users = sysdweb
-- name: Configure sysdweb
-  blockinfile:
-    path: /etc/sysdweb.conf
-    create: true
-    marker: "# {mark} ansible managed for {{sysdweb_name}}"
-    block: |
-      [{{sysdweb_name}}]
-      title = {{sysdweb_name}}
-      unit = {{sysdweb_name}}.service
-- name: Install systemd service file
-  copy: src=sysdweb-system.service dest=/etc/systemd/system/
-- name: Enable sysdweb autostart
-  systemd: name=sysdweb-system state=restarted enabled=yes daemon_reload=yes

roles/pi_alsasetup/README.md

@@ -0,0 +1,3 @@
+# pi_alsasetup
+
+Syncs the ALSA configuration file to the host.

roles/pi_alsasetup/tasks/main.yml

@@ -0,0 +1,6 @@
+---
+- name: Sync alsa config
+  ansible.builtin.template:
+    src: asound.conf
+    dest: /etc/asound.conf
+    mode: "0644"

roles/pi_dhtsensor/README.md

@@ -0,0 +1,7 @@
+# pi_dhtsensor
+
+Installs the DHT22 temperature/humidity sensor polling script based on the
+legacy `Adafruit_DHT` library (removing the circuitpython variant/
+`libgpiod2` if present — mutually exclusive with `pi_dhtsensor_circuitpython`).
+
+**Key vars:** `pi_dhtsensor_dht_pin`, `pi_dhtsensor_dht_polling_sleep_time_seconds`

roles/pi_dhtsensor/defaults/main.yml

@@ -0,0 +1,3 @@
+---
+pi_dhtsensor_dht_pin: 12
+pi_dhtsensor_dht_polling_sleep_time_seconds: 20

roles/pi_dhtsensor/handlers/main.yml

@@ -0,0 +1,5 @@
+---
+- name: Restart dht22_sensing
+  ansible.builtin.service:
+    name: dht22_sensing
+    state: restarted

roles/pi_dhtsensor/tasks/main.yml

@@ -0,0 +1,55 @@
+---
+# Use the deprecated version here instead, not the new circuitpython adafruit-circuitpython-dht version
+# the new version needs a lot of CPU time and doesn't work correctly on old raspi 1
+# a copy of the deprecated repo is downloaded as zip (if it goes away)
+
+- name: Uninstall libgpiod2 (circuitpython) if present
+  ansible.builtin.apt:
+    name: libgpiod2
+    cache_valid_time: "7200"
+    state: absent
+- name: Pip uninstall adafruit-circuitpython-dht
+  ansible.builtin.pip:
+    name: adafruit-circuitpython-dht
+    executable: pip3
+    state: absent
+    extra_args: "--break-system-packages"
+- name: Pip install adafruit-dht
+  ansible.builtin.pip:
+    name: adafruit-dht
+    executable: pip3
+    # Modern Raspberry Pi OS kernels no longer expose a "Hardware" line in
+    # /proc/cpuinfo, which breaks this package's built-in Pi auto-detection.
+    # Force it explicitly since we only ever target Raspberry Pis.
+    extra_args: '--break-system-packages --global-option="--force-pi"'
+  notify: Restart dht22_sensing
+- name: Install script config
+  ansible.builtin.template:
+    src: dht22_sensing.json
+    dest: /etc/dht22_sensing.json
+    mode: "0644"
+  notify: Restart dht22_sensing
+- name: Install script
+  ansible.builtin.copy:
+    src: dht22_sensing.py
+    dest: /usr/bin/dht22_sensing
+    owner: root
+    mode: u+rwx
+  notify: Restart dht22_sensing
+- name: Install systemd service file
+  ansible.builtin.copy:
+    src: dht22_sensing.service
+    dest: /etc/systemd/system/
+    mode: "0644"
+  notify: Restart dht22_sensing
+- name: Add script to autostart and start now
+  ansible.builtin.systemd:
+    name: dht22_sensing
+    state: started
+    enabled: "yes"
+    daemon_reload: "yes"
+- name: Add to sysdweb
+  ansible.builtin.include_role:
+    name: pi_sysdweb
+  vars:
+    pi_sysdweb_name: dht22_sensing

roles/pi_dhtsensor/templates/dht22_sensing.json

@@ -1,8 +1,8 @@
 {
   "ha_url": "{{home_assistant_url}}",
   "token": "{{home_assistant_token}}",
-  "dht_pin": "{{dht_pin}}",
+  "dht_pin": "{{pi_dhtsensor_dht_pin}}",
-  "polling_sleep_time_seconds": "{{dht_polling_sleep_time_seconds}}",
+  "polling_sleep_time_seconds": "{{pi_dhtsensor_dht_polling_sleep_time_seconds}}",
 
   "ha_temp_sensor_name": "{{sensor_room_name_ascii|lower}}_dht22_temperatur",
   "ha_temp_friendly_name": "{{sensor_room_name}} Temperatur",

roles/pi_dhtsensor_circuitpython/README.md

@@ -0,0 +1,8 @@
+# pi_dhtsensor_circuitpython
+
+Installs the DHT22 temperature/humidity sensor polling script based on
+`adafruit-circuitpython-dht` (requires `libgpiod2`) — the newer alternative
+to the `pi_dhtsensor` role's legacy `Adafruit_DHT` library. Mutually
+exclusive with `pi_dhtsensor`.
+
+**Key vars:** `pi_dhtsensor_circuitpython_dht_pin`, `pi_dhtsensor_circuitpython_dht_polling_sleep_time_seconds`

roles/pi_dhtsensor_circuitpython/defaults/main.yml

@@ -0,0 +1,3 @@
+---
+pi_dhtsensor_circuitpython_dht_pin: "D12"
+pi_dhtsensor_circuitpython_dht_polling_sleep_time_seconds: 20

roles/pi_dhtsensor_circuitpython/tasks/main.yml

@@ -0,0 +1,37 @@
+---
+- name: Apt install libgpiod2
+  ansible.builtin.apt:
+    name: libgpiod2
+    cache_valid_time: "7200"
+    state: present
+- name: Pip install adafruit-circuitpython-dht
+  ansible.builtin.pip:
+    name: adafruit-circuitpython-dht
+    executable: pip3
+- name: Install script config
+  ansible.builtin.template:
+    src: dht22_sensing.json
+    dest: /etc/dht22_sensing.json
+    mode: "0644"
+- name: Install script
+  ansible.builtin.copy:
+    src: dht22_sensing.py
+    dest: /usr/bin/dht22_sensing
+    owner: root
+    mode: u+rwx
+- name: Install systemd service file
+  ansible.builtin.copy:
+    src: dht22_sensing.service
+    dest: /lib/systemd/system/
+    mode: "0644"
+- name: Add script to autostart and start now
+  ansible.builtin.systemd:
+    name: dht22_sensing
+    state: started
+    enabled: "yes"
+    daemon_reload: "yes"
+- name: Add to sysdweb
+  ansible.builtin.include_role:
+    name: pi_sysdweb
+  vars:
+    pi_sysdweb_name: dht22_sensing

roles/pi_dhtsensor_circuitpython/templates/dht22_sensing.json

@@ -1,8 +1,8 @@
 {
   "ha_url": "{{home_assistant_url}}",
   "token": "{{home_assistant_token}}",
-  "dht_pin": "{{dht_pin}}",
+  "dht_pin": "{{pi_dhtsensor_circuitpython_dht_pin}}",
-  "polling_sleep_time_seconds": "{{dht_polling_sleep_time_seconds}}",
+  "polling_sleep_time_seconds": "{{pi_dhtsensor_circuitpython_dht_polling_sleep_time_seconds}}",
 
   "ha_temp_sensor_name": "{{sensor_room_name_ascii|lower}}_dht22_temperatur",
   "ha_temp_friendly_name": "{{sensor_room_name}} Temperatur",

roles/pi_disable_onboard_bluetooth/README.md

@@ -0,0 +1,4 @@
+# pi_disable_onboard_bluetooth
+
+Disables the Pi's onboard Bluetooth radio via `dtoverlay=disable-bt` in the
+boot config, for hosts that use an external BT/audio dongle instead.

roles/pi_disable_onboard_bluetooth/handlers/main.yml

@@ -0,0 +1,3 @@
+---
+- name: Reboot
+  ansible.builtin.reboot:

roles/pi_disable_onboard_bluetooth/tasks/main.yml

@@ -1,7 +1,7 @@
 ---
 - name: Deactivate onboard bluetooth
-  lineinfile:
+  ansible.builtin.lineinfile:
     path: /boot/firmware/config.txt
     regexp: "^#?dtoverlay=disable-bt"
     line: "dtoverlay=disable-bt"
-  notify: reboot
+  notify: Reboot

roles/pi_hifiberry_amp/README.md

@@ -0,0 +1,6 @@
+# pi_hifiberry_amp
+
+Deactivates the Pi's onboard analog audio and activates a HiFiBerry
+amp/DAC overlay instead.
+
+**Key vars:** `hifiberry_overlay`

roles/pi_hifiberry_amp/handlers/main.yml

@@ -0,0 +1,3 @@
+---
+- name: Reboot
+  ansible.builtin.reboot:

roles/pi_hifiberry_amp/meta/main.yml

@@ -0,0 +1,3 @@
+---
+dependencies:
+  - role: pi_alsasetup

roles/pi_hifiberry_amp/tasks/main.yml

@@ -1,13 +1,13 @@
 ---
 - name: Deactivate normal audio
-  lineinfile:
+  ansible.builtin.lineinfile:
     path: /boot/config.txt
     regexp: "^#?dtparam=audio=on"
     line: "#dtparam=audio=on"
-  notify: reboot
+  notify: Reboot
 - name: Activate Hifiberry
-  lineinfile:
+  ansible.builtin.lineinfile:
     path: /boot/firmware/config.txt
     regexp: "^#?dtoverlay=hifiberry-amp"
-    line: "dtoverlay={{hifiberry_overlay}}"
+    line: "dtoverlay={{ hifiberry_overlay }}"
-  notify: reboot
+  notify: Reboot

roles/pi_irserver/README.md

@@ -0,0 +1,5 @@
+# pi_irserver
+
+Installs and configures `irserver` (with a Hauppauge remote config) as an
+autostarted systemd service for IR remote control, and registers it with
+`pi_sysdweb`.

roles/pi_irserver/handlers/main.yml

@@ -0,0 +1,5 @@
+---
+- name: Restart irserver
+  ansible.builtin.service:
+    name: irserver
+    state: restarted

roles/pi_irserver/tasks/main.yml

@@ -0,0 +1,35 @@
+---
+- name: Copy irserver
+  ansible.builtin.copy:
+    src: irserver
+    dest: /usr/bin/irserver
+    mode: u+rx
+  notify: Restart irserver
+- name: Make config dir for remotes
+  ansible.builtin.file:
+    path: /usr/bin/remotes
+    state: directory
+    mode: "0755"
+- name: Copy hauppauge remote
+  ansible.builtin.copy:
+    src: hauppauge.rem
+    dest: /usr/bin/remotes/
+    mode: "0644"
+  notify: Restart irserver
+- name: Copy irserver systemd file
+  ansible.builtin.copy:
+    src: irserver.service
+    dest: /lib/systemd/system/
+    mode: "0644"
+  notify: Restart irserver
+- name: Enable irserver autostart
+  ansible.builtin.systemd:
+    name: irserver
+    state: started
+    enabled: "yes"
+    daemon_reload: "yes"
+- name: Add irserver to sysdweb
+  ansible.builtin.include_role:
+    name: pi_sysdweb
+  vars:
+    pi_sysdweb_name: irserver