fixing garten_bus_controller

.gitignore

@@ -3,3 +3,4 @@
 # You can modify this file to suit your needs.
 /.esphome/
 /secrets.yaml
+/venv

garten_bus_controller.yaml

@@ -25,10 +25,10 @@ external_components:
       ref: master
 
 
-external_components:
-  - source:
-      type: local
-      path: my_components
+#external_components:
+#  - source:
+#      type: local
+#      path: my_components
 
 #wifi:
 #  ssid: "WLAN"
@@ -75,6 +75,7 @@ modbus_controller:
   - modbus_id: "modbus_relays"
     id: "relayboard32"
     address: 0x1
+    update_interval: "60s"
   - modbus_id: "modbus_relays"
     id: "relayboard8_with_inputs"
     address: 0x2
@@ -91,37 +92,81 @@ packages:
     file: "modbus_relay.yaml"
     vars:
       cid: relayboard32
-      name: "modbus-switch01"
+      name: "ventil-beete-nordwest"
       dev_addr: 0x1
       register_addr: 0x01
   relay02: !include
     file: "modbus_relay.yaml"
     vars:
       cid: relayboard32
-      name: "modbus-switch02"
+      name: "ventil-beet-west"
       dev_addr: 0x1
       register_addr: 0x02
   relay03: !include
     file: "modbus_relay.yaml"
     vars:
       cid: relayboard32
-      name: "modbus-switch03"
+      name: "ventil-sprinkler-westen"
       dev_addr: 0x1
       register_addr: 0x03
-  relay16: !include
+  #relay04: !include
+  #  file: "modbus_relay.yaml"
+  #  vars:
+  #    cid: relayboard32
+  #    name: "ventil-gartenhaus-kein-rohr-angeschlossen"
+  #    dev_addr: 0x1
+  #    register_addr: 0x04
+  relay05: !include
     file: "modbus_relay.yaml"
     vars:
       cid: relayboard32
-      name: "modbus-switch16"
+      name: "ventil-sprinkler-sud"
       dev_addr: 0x1
-      register_addr: 0x0f
-  relay17: !include
+      register_addr: 0x05
+  #relay06: !include
+  #  file: "modbus_relay.yaml"
+  #  vars:
+  #    cid: relayboard32
+  #    name: "ventil-gartenhaus-kein-ventil-angeschlossen"
+  #    dev_addr: 0x1
+  #    register_addr: 0x06
+  relay07: !include
     file: "modbus_relay.yaml"
     vars:
       cid: relayboard32
-      name: "modbus-switch17"
+      name: "ventil-brunnen-in-zisterne"
       dev_addr: 0x1
-      register_addr: 0x10
+      register_addr: 0x07
+  #--- obere reihe
+  relay29: !include
+    file: "modbus_relay.yaml"
+    vars:
+      cid: relayboard32
+      name: "poolpumpe-speed3"
+      dev_addr: 0x1
+      register_addr: 29
+  relay30: !include
+    file: "modbus_relay.yaml"
+    vars:
+      cid: relayboard32
+      name: "poolpumpe-speed2"
+      dev_addr: 0x1
+      register_addr: 30
+  relay31: !include
+    file: "modbus_relay.yaml"
+    vars:
+      cid: relayboard32
+      name: "poolpumpe-speed1"
+      dev_addr: 0x1
+      register_addr: 31
+  relay32: !include
+    file: "modbus_relay.yaml"
+    vars:
+      cid: relayboard32
+      name: "poolpumpe-speed-off"
+      dev_addr: 0x1
+      register_addr: 32
+
 # ------------ Relays of 8-Relay board ----
   b2relay1: !include
     file: "modbus_relay.yaml"

modbus_relay.yaml

@@ -4,7 +4,8 @@ switch:
     modbus_controller_id: ${cid}
     name: ${name}
     register_type: holding
-    address: ${dev_addr}
+    address: ${register_addr}
+    force_new_range: true
     write_lambda: |-
       bool open = (x == 1);
       payload.push_back(${dev_addr});  // device address
@@ -13,4 +14,10 @@ switch:
       payload.push_back(${register_addr});  // 
       payload.push_back(open ? 0x01 : 0x02); // Command
       payload.push_back(0x00);
-      return true;
+      return open;
+    #lambda: |-
+    #  if(item->start_address == 0x07)
+    #  {
+    #  ESP_LOGW("relay_lambda", "addr %d | x=%d , (%d, %d)", item->start_address, x, data[item->offset + 0], data[item->offset + 1]);
+    #  }
+    #  return (x == 1);